 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| H T-13/4 (5 mm), T-1 (3 mm), High Performance, Tinted, Diffused, AlInGaP, and TS AlGaAs Red LED Lamps Technical Data Features * High Light Output Over a Wide Range of Currents * Popular T-1 and T-1 3/4 Packages * Choice of Three Colors Amber Reddish-Orange Deep Red * Wide Viewing Angles * Long Life: Solid State Technology * Available on Tape and Reel HLMA-DX05 Series HLMA-KX05 Series HLMP-D1XX Series HLMP-J100/J150 Series Applications * Outdoor Message Boards * Automotive Lighting * Portable Equipment * Medical Equipment * Changeable Message Signs Description The HLMA-D/KXXX series tinted, diffused, solid state lamps utilize the newly developed aluminum indium gallium phosphide (AlInGaP) LED technology. This technology has a very high luminous efficiency, capable of producing high light output over a wide range of drive currents. These LED lamps are available with a choice of two colors, 592 nm amber and 615 nm reddishorange, and with two viewing angles, 65 and 60. The HLMP-D/JXXX series tinted, diffused solid state lamps utilize the highly optimized transparent substrate aluminum gallium arsenide (TS AlGaAs) LED technology. This technology has a very high luminous efficiency, Device Selection Guide Viewing Angle 21/2 65 60 40 25 55 55 Amber d = 592 nm HLMADL05 HLMAKL05 ReddishOrange d = 615 nm HLMADH05 HLMAKH05 HLMPD115 HLMPD120 HLMPJ100 HLMPJ150 Deep Red d = 644 nm Package Outline A B A A C C Package Description T-13/4 (5 mm), Tinted, Diffused, Standard Current T-1 (3 mm), Tinted, Diffused, Standard Current T-13/4 (5 mm), Tinted, Diffused, Standard Current T-13/4 (5 mm), Tinted, Diffused, Standard Current T-1 (3 mm), Tinted, Diffused, Standard Current T-1 (3 mm), Tinted, Diffused, Diffused, Low Current 5964-9287E 1-49 capable of producing high light output over the wide range of drive currents from 500 A to 50 mA. The color is deep red at a dominant wavelength of 644 nm. TS AlGaAs is a flip-chip LED technology, die attached to the anode lead and wire bonded to the cathode lead. Available viewing angles are 25, 40, and 55. Package Dimensions 5.08 (0.200) 4.57 (0.180) 3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115) 3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115) 4.70 (0.185) 4.19 (0.165) 9.19 (0.362) 8.43 (0.332) 0.89 (0.035) 0.64 (0.025) 6.35 (0.250) 5.58 (0.220) 4.70 (0.185) 4.19 (0.165) 6.35 (0.250) 5.58 (0.220) 1.02 NOM. (0.040) 1.02 (0.040) NOM. 0.45 (0.018) SQUARE NOMINAL CATHODE 0.45 SQUARE NOMINAL (0.018) 24.13 MIN. (0.95) 25.40 MIN. (1.00) 24.13 MIN. (0.95) CATHODE ANODE ANODE CATHODE 1.27( 0.050) NOM. 1.27 NOM. (0.050) 0.45 (0.018) SQUARE NOMIMAL 6.10 (0.240) 5.59 (0.220) CATHODE 2.54 (0.100) NOM. NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. AN EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS. 2.54 NOM. (0.100) 2.54 NOM. (0.100) 1.27 NOM. (0.050) A B C HLMA-DL05/DH05/Kl05/KH05 AlInGaP Lamps Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current[1,3,4] Peak Forward Current[2] Average Input Power[2] Reverse Voltage (IR = 100 A) Operating Temperature Range Storage Temperature Range Junction Temperature Soldering Temperature [1.59 mm (0.06 in.) below seating plane] HLMADL05 50 200 103 5 -40 to +100 -55 to +100 HLMADH05 50 200 103 5 -40 to +100 -55 to +100 110 260C for 5 second HLMAKL05 50 200 103 5 -40 to +100 -55 to +100 HLMAKH05 50 200 103 5 -40 to +100 -55 to +100 Units mA mA mW V C C C Notes: 1. Derate linearly as shown in Figure 4. 2. Any pulsed operation cannot exceed the Absolute Max Peak Forward current as specified in Figure 5. 3. Drive currents between 10 mA and 30 mA are recommended for best long term performance. 4. Operation at currents below 10 mA is not recommended, please contact your Hewlett-Packard sales representative. 1-50 Optical Characteristics at T = 25C A Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 35 35 35 35 100 100 100 100 Peak Wavelength peak (nm) Typ. 594 621 594 621 Color, Dominant Wavelength d[2] (nm) Typ. 592 615 592 615 Viewing Angle 2 1/2 Degrees[3] Typ. 65 65 60 60 Luminous Efficacy v (lm/w) 480 263 480 263 Part Number HLMADL05 DH05 KL05 KH05 Notes: 1. v is the total luminous flux output as measured with an integrating sphere. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. Electrical Characteristics at T = 25C A Forward Voltage VF (Volts) @ IF = 20 mA Typ. Max. 1.9 1.9 1.9 1.9 2.4 2.4 2.4 2.4 Reverse Breakdown VR (Volts) @ IR = 100 A Min. Typ. 5 5 5 5 25 25 25 25 Capacitance C (pF) VF = 0, f = 1 mHz Typ. 60 60 60 60 Speed of Response s (ns) Time Constant e-t/s Typ. 13 13 13 13 Part Number HLMADL05 DH05 KL05 KH05 Thermal Resistance RJ-PIN (C/W) 260 260 290 290 1.0 200 AMBER REDDISH-ORANGE IF - FORWARD CURRENT - mA 180 160 140 120 100 80 60 40 20 0 1.0 1.5 2.0 2.5 3.0 RELATIVE INTENSITY 0.5 0 550 594 600 621 630 650 700 WAVELENGTH - nm VF - FORWARD VOLTAGE - V Figure 1. Relative Intensity vs. Wavelength. Figure 2. Forward Current vs. Forward Voltage. 1-51 2.5 50 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) I AVG - AVERAGE CURRENT - mA f 1 KHz 50 I F - FORWARD CURRENT - mA 2.0 45 40 35 30 25 20 15 10 5 R J-A = 618 C/W RJ-A = 412 C/W 40 f 300 Hz f 100 Hz 20 1.5 30 1.0 0.5 10 0.0 0 10 20 30 40 50 0 0 10 20 30 40 50 60 70 80 90 100 T A - AMBIENT TEMPERATURE - C 0 50 100 150 200 IPEAK - PEAK FORWARD CURRENT - mA IF - DC FORWARD CURRENT - mA Figure 3. Relative Luminous Intensity vs. Forward Current. Figure 4. Maximum Forward Current vs. Ambient Temperature. Derating Based on TJ Max = 110C. Figure 5. Maximum Average Current vs. Peak Forward Current. 1.0 0.9 0.8 NORMALIZED INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES Figure 6. Spatial Radiation Pattern for HLMA-DL05/DH05 65 Lamps. 1.0 0.9 0.8 NORMALIZED INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES Figure 7. Spatial Radiation Pattern for HLMA-KL05/KH05 60 Lamps. 1-52 HLMP-D115/D120/J100/J150 TS AlGaAs Red Lamps Absolute Maximum Ratings at TA = 25C Parameter DC Forward Current[1] Current[2] Peak Forward HLMPD115 50 300 100 5 -55 to +100 -55 to +100 HLMPD120 50 300 100 5 -55 to +100 -55 to +100 110 260C for 5 second HLMPJ100 50 300 100 5 -55 to +100 -55 to +100 HLMPJ150 50 300 100 5 -55 to +100 -55 to +100 Units mA mA mW V C C C Average Input Power[2] Reverse Voltage (IR = 100 A) Operating Temperature Range Storage Temperature Range Junction Temperature Soldering Temperature [1.59 mm (0.06 in.) below seating plane] Notes: 1. Derate linearly as shown in Figure 12. 2. Any pulsed operation cannot exceed the Absolute Max Peak Forward current as specified in Figure 13. Optical Characteristics at TA = 25C Luminous Intensity IV (mcd) @ 20 mA[1] Min. Typ. 138 138 39 1.3 250 350 175 3.0 Peak Wavelength peak (nm) Typ. 654 654 654 654 Color, Dominant Wavelength d[2] (nm) Typ. 644 644 644 644 Viewing Angle 2 1/2 Degrees[3] Typ. 40 25 55 55 Luminous Efficacy v (lm/w) 85 85 85 85 Part Number HLMPD115 D120 J100 J150 Notes: 1. v is the total luminous flux output as measured with an integrating sphere. 2. The dominant wavelength, d, is derived from the CIE Chromaticity Diagram and represents the color of the device. 3. 1/2 is the off-axis angle where the luminous intensity is 1/2 the peak intensity. Electrical Characteristics at TA = 25C Forward Voltage VF (Volts) @ IF = 20 mA Min. Typ. 1.85 1.85 1.85 1.6 2.4 2.4 2.4 1.9 Reverse Breakdown VR (Volts) @ IR = 100 A Min. Typ. 5 5 5 5 20 20 20 20 Capacitance C (pF) VF = 0 f = 1 mHz Typ. 20 20 20 20 Speed of Response s (ns) Time Constant e-t/s Typ. 45 45 45 45 Part Number HLMPD115 D120 J100 J150 Thermal Resistance RJ-PIN (C/W) 260 260 290 290 1-53 1.0 300 200 RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA) 2.4 2.0 1.0 0.5 IF - FORWARD CURRENT - mA 100 50 RELATIVE INTENSITY 10-1 20 10 5 2 0.2 0.1 0.05 10-2 10-3 500 600 700 1000 1 0 0.5 1.0 1.5 2.0 2.5 3.0 3.5 VF - FORWARD VOLTAGE - V 0.01 0.5 1 2 5 10 20 50 WAVELENGTH - nm IF - DC FORWARD CURRENT - mA Figure 8. Relative Intensity vs. Wavelength. Figure 9. Forward Current vs. Forward Voltage. Figure 10. Relative Luminous Intensity vs. DC Forward Current. 1.2 IF - FORWARD CURRENT - mA 50 IAVG = AVERAGE FORWARD CURRENT - mA 50 f > 1000 Hz 40 f > 300 Hz 30 f > 100 Hz 20 1.1 V - RELATIVE EFFICIENCY (NORMALIZED AT 20 mA) 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0.0 1 2 5 10 20 50 100 200 300 IPEAK - PEAK FORWARD CURRENT - mA 40 RJA = 400 C/W 30 RJA = 550 C/W 20 10 10 0 0 20 40 60 80 100 TA - AMBIENT TEMPERATURE - C 0 50 100 150 200 250 300 IPEAK - PEAK FORWARD CURRENT - mA Figure 11. Relative Efficiency vs. Peak Forward Current. Figure 12. Maximum Forward Current vs. Ambient Temperature. Derating Based on TJ Max = 110C. Figure 13. Maximum Average Current vs. Peak Forward Current. 1-54 1.0 0.9 0.8 NORMALIZED INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES Figure 14. Spatial Radiation Pattern for 40 HLMP-D115 Lamp. 1.0 0.9 0.8 NORMALIZED INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES Figure 15. Spatial Radiation Pattern for 25 HLMP-D120 Lamp. 1.0 0.9 0.8 NORMALIZED INTENSITY 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0 100 90 80 70 60 50 40 30 20 10 0 10 20 30 40 50 60 70 80 90 100 ANGULAR DISPLACEMENT - DEGREES Figure 16. Spatial Radiation Pattern for 55 HLMP-J100-J150 Lamps. 1-55 |
Price & Availability of HLMA-DL05
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |