|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Semiconductor MR27V6452D 4,194,304-Word x 16-Bit or 8,388,608-Word x 8-Bit 8-Word x 16-Bit or 16-Word x 8-Bit Page Mode One Time PROM DESCRIPTION 1A The MR27V6452D is a 64Mbit electrically Programmable Read-Only Memory with page mode. Its configuration can be electrically switched between 4,194,304 word x 16bit and 8,388,608 word x 8 bit. The MR27V6452D operates on a single +3.3V power supply and is TTL compatible. The MR27 V6452D provides Page mode which can greatly reduce the read access time. Since the MR27V6452 D operates asynchronously , external clocks are not required , making this device easy-to-use. The MR27V6452D is suitable as large-capacity fixed memory for microcomputers and data terminals. It is manufactured using a CMOS double silicon gate technology and is offered in 44-pin SOP package. FEATURES * 4,194,304 word x 16bit / 8,388,608 word x 8bit electrically switchable configuration * Single +3.3V power supply * Access time 120ns Page mode access time 30ns * Input / Output TTL compatible * Three-state output * Package 44-pin plastic SOP (SOP44-P-600-1.27-K) June 1999 1 MR27V6452D PIN CONFIGURATION (TOP VIEW) A21 1 A18 2 A17 3 A7 4 A6 5 A5 6 A4 7 A3 8 A2 9 A1 10 A0 11 CE 12 VSS 13 OE 14 D0 15 D8 16 D1 17 D9 18 D2 19 D10 20 D3 21 D11 22 44 A20 43 A19 42 A8 41 A9 40 A10 39 A11 38 A12 37 A13 36 A14 35 A15 34 A16 33 BYTE/Vpp 32 VSS 31 D15/A-1 30 D7 29 D14 28 D6 27 D13 26 D5 25 D12 24 D4 23 VCC 44-pin SOP PIN NAMES D15/A-1 A0-A21 D0-D14 CE OE VCC VSS BYTE/VPP Address input Data output Chip enable Output enable FUNCTIONS Data output / Address input Power supply voltage GND Mode switch / Program power supply voltage 2 MR27V6452D BLOCK DIAGRAM A-1 X8/X16 Switch CE OE BYTE/VPP PGM CE OE A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 Row Decoder Memory Matrix Address Buffer 4,194,304X16-Bit or 8,388,608X8-Bit Column Decoder Multiplexer & Page Data Latch Output Buffer D0 D1 D2 D3 D4 D5 D6 D7 D8 D10 D9 D12 D14 D15 D11 D13 In 8-bit output mode, these pins are three-stated and pin D15 functions as the A-1 address pin. FUNCTION TABLE MODE READ (16-Bit) READ (8-Bit) OUTPUT DISABLE STAND-BY PROGRAM PROGRAM INHIBIT PROGRAM VERIFY * : Don't Care CE L L L H L H H OE BYTE/VPP L L H * H H L 9.75V 4.0V H L H L H L 3.3V DOUT VCC D0 - D7 D8 - D14 DOUT Hi-Z Hi-Z * Hi-Z * DIN Hi-Z DOUT D15/A-1 L/H 3 MR27V6452D ABSOLUTE MAXIMUM RATINGS Parameter Operating temperature under bias Storage temperature Input voltage Output voltage Power supply voltage Program power supply voltage Power dissipation per package Symbol Topr Tstg VI VO VCC VPP PD relative to VSS Condition Value 0 to 70 -55 to 125 -0.5 to VCC + 0.5 -0.5 to VCC + 0.5 -0.5 to 5 -0.5 to 11.5 1.0 Unit C C V V V V W RECOMMENDED OPERATING CONDITIONS FOR READ (Ta=0 to 70C) Parameter VCC power supply voltage VPP power supply voltage Input "H" level Input "L" level Voltage is relative to Vss Symbol VCC VPP VIH VIL VCC=3.0V-3.6V Condition Min. 3.0 -0.5 2.2 -0.5 Typ. Max. 3.6 VCC+0.5 VCC+0.5 0.6 Unit V V V V 4 MR27V6452D ELECTRICAL CHARACTERISTICS (Read operation) DC Characteristics (VCC=3.3V0.3V, Ta=0 to 70C) Parameter Input leakage current Output leakage current VCC power supply current (Standby) VCC power supply current (Read) VPP power supply current Input "H" level Input "L" level Output "H" level Output "L" level Voltage is relative to Vss AC Characteristics (VCC=3.3V0.3V, Ta=0 to 70C) Parameter Address access cycle time Address access time Page access cycle time Page access time CE access time OE access time Output disable time Output hold time Symbol TC TACC TPC TPAC TCE TOE TCHZ TOHZ TOH Condition CE=OE=VIL OE=VIL CE=VIL OE=VIL CE=VIL CE=OE=VIL Min. 120 30 0 0 0 Max. 120 30 120 40 30 25 Unit ns ns ns ns ns ns ns ns ns Symbol ILI ILO ICS1 ICS2 ICCA IPP VIH VIL VOH VOL Condition VI=0 to Vcc VO=0 to Vcc CE=VCC CE=VIH CE=VIL , OE=VIH tc=120ns VPP=VCC IOH=-200A IOL=1mA Min. 2.2 -0.5 VCC-0.4 Typ. Max. 10 10 50 1 100 10 VCC+0.5 0.6 0.4 Unit A A A mA mA A V V V V Measurement conditions Input signal level Input timing reference level Output load Output timing reference level 0V/3V 0.8V/2.0V 100pF 0.8V/2.0V 1.7V 400ohms Output 100pF 5 MR27V6452D TIMING CHART NORMAL MODE READ CYCLE tC ADDRESS tCE CE tOH tOE OE tACC DOUT Hi-Z tCHZ tOHZ Valid Data Hi-Z PAGE MODE READ CYCLE tC A3 - A21 tPC A0 - A2 (Word mode) A-1 - A2 (Byte mode) tCE CE tCHZ tOE OE tACC DOUT Hi-Z Hi-Z tPAC tPAC tOHZ tOH tPC 6 MR27V6452D ELECTRICAL CHARACTERISTICS (Programming operation) DC Characteristics (Ta=25C5C) Parameter Input leakage current VPP power supply current (Program) VCC power supply current Input "H" level Input "L" level Output "H" level Output "L" level Program voltage VCC power supply voltage Voltage is relative to Vss Symbol ILI IPP2 ICC VIH VIL VOH VOL VPP VCC Condition VI=VCC+0.5V CE=VIL IOH=-400A IOL=2.1mA Min. 3.0 -0.5 2.4 9.5 3.9 Typ. 9.75 4.0 Max. 10 50 80 VCC+0.5 0.8 0.45 10.0 4.1 Unit A mA mA V V V V V V AC Characteristics (Vcc=4.0V0.1V,Vpp=9.75V0.25V,Ta=25C5C) Parameter Address set-up time OE set-up time Data set-up time Address hold time Data hold time Output float delay from OE VPP voltage set-up time Program pulse width Data valid from OE Address hold from OE high Symbol TAS TOES TDS TAH TDH TOHZ TVS TPW TOE TAHO Condition Min. 100 2 100 2 100 0 2 9 0 Typ. 10 Max. 100 11 100 Unit ns s ns s ns ns s s ns ns Pin Check Function Pin Check Function is to check contact between each device-pin and each socket-lead with EPROM programmer. Setting up address as the following condition call the preprogrammed codes on device outputs. (Vcc=3.3V0.3V,CE=OE=VIL,BYTE/Vpp=VIH,Ta=25C5C) A0 A1 A2 A3 A4 A5 A6 A7 A8 A9 A10 A11 A12 A13 A14 A15 A16 A17 A18 A19 A20 A21 DATA 0 1 1 0 0 1 1 0 0 1 1 0 0 1 1 0 0 1 VH* VH* 0 1 1 0 0 1 1 0 0 1 1 0 0 1 0 1 1 0 1 0 0 1 0 1 FF00 00FF FFFF * :VH=8V0.25V 7 Other conditions MR27V6452D Consecutive Programming Waveforms A0 - A21 tAS tPW CE tAH High OE tDS D0 - D15 tVS BYTE/VPP tDH Din Din Consecutive Program Verify Waveforms A0 - A21 High CE tACC OE tOE D0 - D15 tOHZ tAHO Dout 9.75V Dout BYTE/VPP 8 MR27V6452D Program and Program Verify Cycle Waveforms A0 - A21 tAS tPW CE tOES OE tOHZ D0 - D15 tDS tDH tOE tOHZ tAHO Din 9.75V Dout BYTE/VPP PIN Capacitance (VCC=3.3V, Ta=25C, f=1MHz) Parameter Input BYTE/VPP Output Symbol CIN1 CIN2 COUT Condition VI=0V VO=0V Min. Typ. Max. 12 120 15 Unit pF 9 MR27V6452D Programming / Verify Flow Chart Programming Verify Start Start NO Pin Check NO Bad insertion Pin Check OK Address = First location VCC=3.0V VPP=3.0V NG OK Address = First location Bad insertion VCC=4.0V VPP=9.75V Verify (One Byte) PASS VCC=3.6V VPP=3.6V Program 10s NO Increment Address Last Address ? YES Address = First location Verify (One Byte) PASS Device Passed X=0 Device Failed NG NG Verify (One Byte) PASS NO Increment Address Last Address ? YES VCC=3.0V VPP=3.0V YES X=2? NO Program 10s X=X+1 NG Verify (One Byte) PASS Device Passed Device Failed 10 Semiconductor NOTICE The information contained herein can change without notice owing to product and/or technical improvements. Before using the product, please make sure that the information being referred to is up-to-date. The outline of action and examples for application circuits described herein have been chosen as an explanation for the standard action and performance of the product. When planning to use the product, please ensure that the external conditions are reflected in the actual circuit, assembly, and program designs. When designing your product, please use our product below the specified maximum ratings and within the specified operating ranges including, but not limited to, operating voltage, power dissipation, and operating temperature. Oki assumes no responsibility or liability whatsoever for any failure or unusual or unexpected operation resulting from misuse, neglect, improper installation, repair, alteration or accident, improper handling, or unusual physical or electrical stress including, but not limited to, exposure to parameters beyond the specified maximum ratings or operation outside the specified operating range. Neither indemnity against nor license of a third party's industrial and intellectual property right, etc. is granted by us in connection with the use of the product and/or the information and drawings contained herein. No responsibility is assumed by us for any infringement of a third party's right which may result from the use thereof. The products listed in this document are intended for use in general electronics equipment for commercial applications (e.g., office automation, communication equipment, measurement equipment, consumer electronics, etc.). These products are not authorized for use in any system or application that requires special or enhanced quality and reliability characteristics nor in any system or application where the failure of such system or application may result in the loss or damage of property, or death or injury to humans. Such applications include, but are not limited to, traffic and automotive equipment, safety devices, aerospace equipment, nuclear power control, medical equipment, and life-support systems. Certain products in this document may need government approval before they can be exported to particular countries. The purchaser assumes the responsibility of determining the legality of export of these products and will take appropriate and necessary steps at their own expense for these. No part of the contents cotained herein may be reprinted or reproduced without our prior permission. All brand, company and product names are the trademarks or registered trademarks of their respective owners. Copyright 1999 Oki Electric Industry Co., Ltd. ADDRESSES & SEMICONDUCTOR WEB SITES OKI Electric Industry Co., Ltd., Device Business Group, 10-3, Shibaura, 4-chome, Minato-ku, Tokyo 108, Japan, Tel.: +81-(0)3-5445-6327, Fax.: +81-(0)3-5445-6328, http://www.oki.co.jp/semi/ OKI Semiconductor Company, 785 North Mary Avenue, Sunnyvale, CA 94086, U.S.A., Tel.: +1-408-720-1900, Fax.: +1-408-720-1918, http://www.okisemi.com/ OKI Electric Europe GmbH, Head Office Europe, Hellersbergstrasse 2, D-41460 Neuss, Germany, Tel: +49-2131-15960, Fax: +49-2131-103539, http://www.oki-europe.de/ OKI Electronics (Hong Kong) Ltd., Suite 1901-1&19, Tower 3, China Hong Kong City, 33 Canton Road, Tsimshatsui, Kowloon, Hong Kong, Tel.: +852-2-736-2336, Fax.: +852-2-736-2395 OKI Semiconductor (Asia) Pte. Ltd., 78 Shenton Way 09-01, Singapore 0207, Tel.: +65-221-3722, Fax.: +65-323-5376 Far Eastern Electric Industry Co.,. Ltd., 7th Fl. No.260, Tun Hwa North Road, Taipei, Taiwan, R.O.C., Sumitomo-Flysun Building, Tel.: +886-2-2719-2561, Fax.: +886-2-2715-2892 http://www.ost.oki.co.jp/ For further information, please contact: People To People Technology |
Price & Availability of MR27V6452D |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |