Part Number Hot Search : 
L79LXXC 0603H A5800607 MLL979B HMM5139B KTC2347 PM73121 MP8725
Product Description
Full Text Search
 

To Download AMT8650 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 AMT8650
10 Gb/s 1310/1550nm PIN-TIA
ADVANCED PRODUCT INFORMATION - Rev 0.0
FEATURES
* * * * * * 10 Gb/s differential output TIA 8.5 GHz Bandwidth -19 dBm Typical Sensitivity +3 dBm Optical Overload 1250-1620nm PIN Photodetector Transimpedance gain of 10K and 600mVpp output
APPLICATIONS
* * SONET OC-192/SDH STM-64 10Gb/s Ethernet High speed 5-pin package
Product Description
The ANADIGICS AMT8650 is a low cost optical receiver capable of operation to 10Gb/s. A high performance PIN photodiode and a low noise, high gain transimpedance pre-amplifier (TIA) are incorporated in a hermetic, high speed header. The bandwidth is 8.5Ghz and dynamic range is over 22dB. High gain of the TIA eliminates the need for a separate post amplifier in most applications. These devices are readily designed into receivers, transceivers and transponders for SONET OC192/SDH STM-64 and 10 Gigabit Ethernet.
VPD 2
VTIA 3
RF
PIN
1
VOUTP VOUTN
4 Vref 5
Figure 1: Functional Block Diagram
01/2006
AMT8650
ELECTRICAL CHARACTERISTICS
Table 1: Absolute Maximum Ratings
PARAMETER Supply Voltage Photodiode bias Voltage Optical Input Power Storage Temperature MIN -0.5 2.5 - 40 MAX 5.5 10 +4 + 85 UNIT V V dBm oC
Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability.
Table 2: Electrical Specifications
PARAMETER Wavelength (1) Sensitivity Overload Responsivity 1550nm Responsivity 1310nm Dark current Small signal transimpedance gain (differential) Small signal 3dB bandwidth Low frequency cutoff Output return loss (differential)(2) Output voltage swing (differential) Optical return loss Photodiode bias voltage TIA supply voltage TIA supply current Power consumption Operating temperature (1) (2) 10Gb/s PRBS 2 -, 1550nm, ER >12dB 1/2(S11 - S21 + S22 - S12), 100MHz - 9GHz
31
MIN 1250 0.80 0.75 50 4 4.7 -40
TYP -19 3 0.90 0.85 0.2 10 8.5 30 9 600 55 5 5 48 240 25
MAX 1620 5 9 5.3 85
UNIT nm dB dBm A/W A/W nA K GHz KHz dB mVP-P dB V V mA mW oC
Figure 2: Pin location
2 3
PIN 1 2 3 4 5 NAME VOUTP VPD VTIA VOUTN Ground
Table 3: Pin description
DESCRIPTION Non-inverted output voltage. Logical `1' with an optical input. Output is not AC coupled. Photodiode bias: 5V Amplifier supply voltage: 5V Inverted output voltage: Logical `0' with an optical input. Output is not AC coupled Ground
1
4
5
ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2006
2
AMT8650
PERFORMANCE
12 10 8 6 4 dB 2 0 -2 -4 -6 0 1 2 3 4 5 6 GHz 7 8 9 10 11 12
Figure 3: Frequency response of AMT8650-T46L-EVA (-20dBm optical input)
Figure 4: Optical input power: -5dBm, extinction ratio: 12dB. (100mV/Div, 20ps/Div)
Figure 5: Optical input power: -10dBm, extinction ratio: 12dB. (100mV/Div, 20ps/Div)
Figure 6: Optical input power: -15dBm, extinction ratio: 12dB. (50mV/Div, 20ps/Div)
Figure 7: Optical input power: -20dBm, extinction ratio: 12dB. (20mV/Div, 20ps/Div)
ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2006
3
AMT8650
PACKAGE DIMENSIONS (mm [Inches])
3.18 [0.1251] 4.71 [0.1857] 1.32 [0.0520]
1.17 [0.0461] 4x R0.23 [R0.0089]
R0.12 [R0.0049] R0.23 [R0.0089] 0.89 [0.0351] 5.41 [0.2132] 4.76 [0.1875] 1.23 [0.0485] 0.56 [0.0219] 3.66 [0.1440] 0.38 [0.0150] 2.54 [0.1001]
EVALUATION BOARD
VTIA
180nH
22uF/20V GND GND
100nF GND
10nF
RF out (P) V TIA V PD
VPD
180nH 330R 22uF/20V 100nF GND GND 10nF GND 10nF
100nF
GND
VOUTP VOUTN GND
100nF
RF out (N)
GND
GND
ORDERING INFORMATION
Part Number AMT8650-T46L AMT8650-H1 AMT8650-T46L-EVA AMT8650-H1-EVA PACKAGE DESCRIPTION 5V High speed 5 pin package with ball lens 5V High speed 5 pin package with SC/APC pigtail 5V High speed 5 pin package with ball lens mounted on evaluation board 5V High speed 5 pin package with pigtail mounted on evaluation board
ANADIGICS, Inc.
829 Flynn Road Camarillo, California 93012, U.S.A. Tel: +1 (805) 445-4500 Fax: +1 (805) 445-4502 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com
IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibility for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices, or systems. Use of an ANADIGICS product in any such application without written consent is prohibited.
ADVANCED PRODUCT INFORMATION - Rev 0.0 01/2006
4


▲Up To Search▲   

 
Price & Availability of AMT8650

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X