 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Surface Mount Microwave Schottky Mixer Diodes Technical Data HSMS-8101 Single HSMS-8202 Series Pair HSMS-8207 Ring Quad HSMS-8209 Crossover Quad Features * Optimized for use at 10-14 GHz * Low Capacitance * Low Conversion Loss * Low RD * Low Cost Surface Mount Plastic Package * Lead-free Option Available Plastic SOT-23 Package Package Lead Code Identification (Top View) SINGLE 3 SERIES 3 1 #1 2 1 #2 2 Plastic SOT-143 Package Description/Applications These low cost microwave Schottky diodes are specifically designed for use at X/Ku-bands and are ideal for DBS and VSAT downconverter applications. They are available in SOT-23 and SOT-143 standard package configurations. Note that Agilent's manufacturing techniques assure that dice found in pairs and quads are taken from adjacent sites on the wafer, assuring the highest degree of match. RING QUAD 3 4 CROSS-OVER QUAD 3 4 1 #7 2 1 #9 2 Absolute Maximum Ratings [1], TA = +25C Symbol Parameter PT PIV TJ TSTG, Top Total Device Dissipation[2] Peak Inverse Voltage Junction Temperature Storage and Operating Temperature Unit mW V C C Min. -- -- -- -65 Max. 75 4 +150 +150 Notes: 1. Operation in excess of any one of these conditions may result in permanent damage to the device. 2. Measured in an infinite heat sink at TCASE = 25C. Derate linearly to zero at 150C per diode. ESD WARNING: Handling Precautions Should Be Taken To Avoid Static Discharge. 2 DC Electrical Specifications, TA = 25C Symbol Parameters and Test Conditions VBR CT C T RD RD VF VF Breakdown Voltage IR = 10 A Total Capacitance VR = 0 V, f = 1 MHz Capacitance Difference VR = 0 V, f = 1 MHz Dynamic Resistance IF = 5 mA Dynamic Resistance Difference IF = 5 mA Forward Voltage IF = 1 mA Forward Voltage Difference IF = 1 mA Lead Code Package Marking Code in White where x is date code HSMS-8101 Units Min. Max. V pF pF mV mV 1 R1x 250 4 0.26 -- 14 -- 350 -- HSMS-8202 Min. Max. 4 0.26 0.04 14 2 250 350 20 2 2Rx HSMS-8207 Min. Max. 4 0.26 0.04 14 2 250 350 20 7 R7x HSMS-8209 Min. Max. 4 0.26 0.04 14 2 250 350 20 9 R9x RF Electrical Parameters, TA = 25C Symbol Lc Z IF SWR Parameter Conversion Loss at 12 GHz IF Impedance SWR at 12 GHz Units dB Typical 6.3 150 1.2 Note: DC Load Resistance = 0 ; LO Power = 1 mW. SPICE Parameters IS = 4.6 E-8 RS = 6 N = 1.09 BV = 7.3 IBV = 10E-5 EG = 0.69 CJO = 0.18 E-12 PB (VJ) = 0.5 M = 0.5 FC = 0.5 TT = 0 Linear Equivalent Circuit 0.08 pF 1.0 nH 1.3 nH 6 0.17 pF Rj Self Bias Rj 1 mA 263 2.5 mA 142 3 Typical Performance, TC = 25C VF - FORWARD VOLTAGE DIFFERENCE (mV) 100 IF - FORWARD CURRENT (mA) FORWARD CURRENT (mA) 30 IF (Left Scale) 10 30 9 10 10 CONVERSION LOSS (dB) 8 1 0.1 TA = +125C TA = +25C TA = -55C VF (Right Scale) 1 1 7 0.01 0 0.2 0.4 0.6 0.8 0.3 0.3 0.20 0.25 0.30 0.35 0.40 0.45 0.50 0.55 V - FORWARD VOLTAGE (V) 6 -7 -5 -3 -1 1 3 5 7 9 11 13 FORWARD VOLTAGE (V) LOCAL OSCILLATOR POWER (dBm) Figure 1. Typical Forward Current vs. Forward Voltage at Three Temperatures. Figure 2. Typical VF Match, HSMS820X Pairs and Quads. Figure 3. Typical Conversion Loss vs. Local Oscillator Power. Ordering Information Specify part number followed by option. For example: HSMS - 8101 - XXX Bulk or Tape and Reel Option Part Number Surface Mount Schottky Profile Option Descriptions -BLK = Bulk -TR1 = 3K pc. Tape and Reel, Device Orientation Figures 4, 5 -TR2 = 10K pc. Tape and Reel, Device Orientation Figures 4, 5 Tape and Reeling conforms to Electronic Industries RS-481, "Taping of Surface Mounted Components for Automated Placement." For lead-free option, the part number will have the character "G" at the end, eg. -TR2G for a 10K pc lead-free reel. Device Orientation REEL CARRIER TAPE USER FEED DIRECTION COVER TAPE TOP VIEW 4 mm END VIEW TOP VIEW 4 mm END VIEW 8 mm ABC ABC ABC ABC 8 mm ABC ABC ABC ABC Note: "AB" represents package marking code. "C" represents date code. Note: "AB" represents package marking code. "C" represents date code. Figure 4. Option -TR1/-TR2 for SOT-23 Packages. Figure 5. Option -TR1/-TR2 for SOT-143 Packages. Package Characteristics Lead Material ...................................................................................... Alloy 42 Lead Finish ............................................................................ Tin-Lead 85-15% Maximum Soldering Temperature .............................. 260C for 5 seconds Minimum Lead Strength .......................................................... 2 pounds pull Typical Package Inductance .................................................................. 2 nH Typical Package Capacitance .............................. 0.08 pF (opposite leads) Package Dimensions Outline 23 (SOT-23) 1.02 (0.040) 0.89 (0.035) 0.54 (0.021) 0.37 (0.015) 3 1.40 (0.055) 1.20 (0.047) 2 2.04 (0.080) 1.78 (0.070) TOP VIEW 0.152 (0.006) 0.066 (0.003) 1.02 (0.041) 0.85 (0.033) 2.65 (0.104) 2.10 (0.083) DATE CODE (X) PACKAGE MARKING CODE (XX) XXX 1 0.60 (0.024) 0.45 (0.018) 3.06 (0.120) 2.80 (0.110) 0.10 (0.004) 0.013 (0.0005) SIDE VIEW DIMENSIONS ARE IN MILLIMETERS (INCHES) 0.69 (0.027) 0.45 (0.018) END VIEW Outline 143 (SOT-143) 0.92 (0.036) 0.78 (0.031) DATE CODE (X) 2 PACKAGE MARKING CODE (XX) 1 XXX 1.40 (0.055) 1.20 (0.047) 3 2.65 (0.104) 2.10 (0.083) 4 0.60 (0.024) 0.45 (0.018) 2.04 (0.080) 1.78 (0.070) 3.06 (0.120) 2.80 (0.110) 0.54 (0.021) 0.37 (0.015) 0.15 (0.006) 0.09 (0.003) 1.04 (0.041) 0.85 (0.033) 0.10 (0.004) 0.013 (0.0005) 0.69 (0.027) 0.45 (0.018) DIMENSIONS ARE IN MILLIMETERS (INCHES) Tape Dimensions and Product Orientation For Outline SOT-23 P D P2 E P0 F W t1 D1 9 MAX Ko 8 MAX 13.5 MAX A0 B0 DESCRIPTION CAVITY LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER DIAMETER PITCH POSITION WIDTH THICKNESS CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) SYMBOL A0 B0 K0 P D1 D P0 E W t1 F P2 SIZE (mm) 3.15 0.10 2.77 0.10 1.22 0.10 4.00 0.10 1.00 + 0.05 1.50 + 0.10 4.00 0.10 1.75 0.10 8.00 +0.30 -0.10 0.229 0.013 3.50 0.05 2.00 0.05 SIZE (INCHES) 0.124 0.004 0.109 0.004 0.048 0.004 0.157 0.004 0.039 0.002 0.059 + 0.004 0.157 0.004 0.069 0.004 0.315 +0.012 -0.004 0.009 0.0005 0.138 0.002 0.079 0.002 PERFORATION CARRIER TAPE DISTANCE BETWEEN CENTERLINE For Outline SOT-143 P P0 D P2 E F W D1 t1 www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. 9 MAX 9 MAX K0 For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (916) 788-6763 Europe: +49 (0) 6441 92460 A0 DESCRIPTION CAVITY LENGTH WIDTH DEPTH PITCH BOTTOM HOLE DIAMETER DIAMETER PITCH POSITION WIDTH THICKNESS CAVITY TO PERFORATION (WIDTH DIRECTION) CAVITY TO PERFORATION (LENGTH DIRECTION) SYMBOL A0 B0 K0 P D1 D P0 E W t1 F P2 SIZE (mm) 3.19 0.10 2.80 0.10 1.31 0.10 4.00 0.10 1.00 + 0.25 1.50 + 0.10 4.00 0.10 1.75 0.10 B0 SIZE (INCHES) 0.126 0.004 0.110 0.004 0.052 0.004 0.157 0.004 0.039 + 0.010 0.059 + 0.004 0.157 0.004 0.069 0.004 0.315+0.012 -0.004 0.0100 0.0005 0.138 0.002 0.079 0.002 China: 10800 650 0017 Hong Kong: (65) 6756 2394 India, Australia, New Zealand: (65) 6755 1939 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (65) 6755 2044 Taiwan: (65) 6755 1843 Data subject to change. Copyright (c) 2004 Agilent Technologies, Inc. Obsoletes 5988-3328EN March 24, 2004 5989-0481EN PERFORATION CARRIER TAPE DISTANCE 8.00 +0.30 -0.10 0.254 0.013 3.50 0.05 2.00 0.05 |
Price & Availability of HSMS-8202
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |