 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MDD 95 Diode Modules IFRMS = 2x 180 A IFAVM = 2x 120 A VRRM = 800-2200 V VRSM V 900 1300 1500 1700 1900 2100 2300 VRRM V 800 1200 1400 1600 1800 2000 2200 Type 3 1 2 MDD 95-08N1 B MDD 95-12N1 B MDD 95-14N1 B MDD 95-16N1 B MDD 95-18N1 B MDD 95-20N1 B MDD 95-22N1 B TO-240 AA 2 1 3 Symbol IFRMS IFAVM IFSM Test Conditions TVJ = TVJM TC = 105C; 180 sine TVJ = 45C; VR = 0 TVJ = TVJM VR = 0 TVJ = 45C VR = 0 TVJ = TVJM VR = 0 t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms t = 10 ms t = 8.3 ms (50 Hz), sine (60 Hz), sine (50 Hz), sine (60 Hz), sine (50 Hz), sine (60 Hz), sine (50 Hz), sine (60 Hz), sine Maximum Ratings 180 A 120 A 2800 3300 2500 2750 39 200 45 000 31 200 31 300 -40...+150 150 -40...+125 A A A A As A2s A2s A2s C C C V~ V~ 2 Features International standard package JEDEC TO-240 AA Direct copper bonded Al2O3 -ceramic base plate Planar passivated chips Isolation voltage 3600 V~ UL registered, E 72873 q q q q q oi dt 2 TVJ TVJM Tstg VISOL Md Weight Symbol IR VF VT0 rT QS IRM RthJC RthJK dS dA a 50/60 Hz, RMS IISOL 1 mA t = 1 min t=1s Applications Supplies for DC power equipment DC supply for PWM inverter Field supply for DC motors Battery DC power supplies q q q q 3000 3600 Mounting torque (M5) Terminal connection torque (M5) Typical including screws Test Conditions TVJ = TVJM; VR = VRRM IF = 300 A; TVJ = 25C For power-loss calculations only TVJ = TVJM TVJ = 125C; IF = 50 A, -di/dt = 6 A/ms per diode; DC current per module per diode; DC current per module 2.5-4/22-35 Nm/lb.in. 2.5-4/22-35 Nm/lb.in. 90 g Characteristic Values 15 mA 1.43 0.75 1.95 170 45 0.26 0.13 0.46 0.23 12.7 9.6 50 V V mW mC A K/W K/W K/W K/W mm mm m/s2 Advantages Space and weight savings Simple mounting Improved temperature and power cycling Reduced protection circuits q q q q Dimensions in mm (1 mm = 0.0394") other values see Fig. 6/7 Creepage distance on surface Strike distance through air Maximum allowable acceleration Data according to IEC 60747 and refer to a single diode unless otherwise stated. IXYS reserves the right to change limits, test conditions and dimensions (c) 2000 IXYS All rights reserved 1-3 MDD 95 Fig. 1 Surge overload current IFSM: Crest value, t: duration Fig. 2 oi2dt versus time (1-10 ms) Fig. 2a Maximum forward current at case temperature Fig. 3 Power dissipation versus forward current and ambient temperature (per diode) Fig. 4 Single phase rectifier bridge: Power dissipation versus direct output current and ambient temperature R = resistive load L = inductive load (c) 2000 IXYS All rights reserved 2-3 MDD 95 Fig. 5 Three phase rectifier bridge: Power dissipation versus direct output current and ambient temperature Fig. 6 Transient thermal impedance junction to case (per diode) RthJC for various conduction angles d: d DC 180 120 60 30 RthJC (K/W) 0.26 0.28 0.30 0.34 0.38 Constants for ZthJC calculation: i 1 2 3 Rthi (K/W) 0.013 0.072 0.175 ti (s) 0.0012 0.047 0.394 Fig. 7 Transient thermal impedance junction to heatsink (per diode) RthJK for various conduction angles d: d DC 180 120 60 30 RthJK (K/W) 0.46 0.48 0.50 0.54 0.58 Constants for ZthJK calculation: i 1 2 3 4 Rthi (K/W) 0.013 0.072 0.175 0.2 ti (s) 0.0012 0.047 0.394 1.32 (c) 2000 IXYS All rights reserved 3-3 |
Price & Availability of MDD95-14N1B
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |