|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
ISTS802, ISTS802A, ISTS802B, ISTS802C 0.5mm APERTURE OPTO-ELECTRONIC SINGLE CHANNEL WIDE GAP SLOTTED INTERRUPTER SWITCHES WITH TRANSISTOR SENSORS DESCRIPTION 3.3 The ISTS802 series of opaque photointerrupters DIA are single channel switches consisting of a 1 Gallium Arsenide infrared emitting diode and a NPN silicon photo transistor mounted in a 2 polycarbonate housing. The package is designed to optimise the mechanical resolution, coupling efficiency, ambient light rejection, cost and 11.3 reliability. Operating on the principle that objects 10.9 opaque to infrared will interrupt the transmission of light between an infrared emitting diode and a photo sensor switching the output from an "ON" state to an "OFF" state. FEATURES l High Sensing Accuracy Aperture - 0.5mm l 5mm Gap between LED and Detector l Also available with flying leads, with or without connector, supplied as required APPLICATIONS l Copiers, Printers, Facsimilies, Record Players, Casette Decks, Optoelectronic Switches, VCR's 1 4 20.2 17.2 + E Dimensions in mm 4 0.5 3 5.0 8.3 7.9 6.6 3.3 3.0 2.8 3.3 3.0 OPTICAL CENTRE LINE 2.54 3.3 DIA 6.6 14.2 0.45 0.40 10.16 26.2 ISTS802A 1 0.5 2 8.3 7.9 20.2 + E 4 14.2 5.0 3 3.3 3.0 2.8 11.3 10.9 2 20.2 1 0.5 2 8.3 7.9 + E 3 0.45 0.40 3.3 3.0 OPTICAL CENTRE LINE 2.54 ISTS802B 4 17.2 6.6 3 5.0 11.3 10.9 3.3 3.0 2.8 3.3 3.0 OPTICAL CENTRE LINE 2.54 3.3 DIA 1 0.5 2 8.3 7.9 10.16 + E 4 6.6 14.2 3 5.0 11.3 10.9 OPTICAL CENTRE LINE 2.54 3.3 3.0 2.8 14.2 0.45 0.40 0.45 0.40 ISTS802 10.16 ISTS802C 10.16 ISOCOM COMPONENTS LTD Unit 25B, Park View Road West, Park View Industrial Estate, Brenda Road Hartlepool, Cleveland, TS25 1YD Tel: (01429) 863609 Fax :(01429) 863581 24/9/97 ISOCOM INC 720 E., Park Boulevard, Suite 104, Plano, TX 75074 USA Tel: (972) 423-5521 Fax: (972) 422-4549 DB91084-AAS/A1 ABSOLUTE MAXIMUM RATINGS (25C unless otherwise specified) Storage Temperature -40C to + 85C Operating Temperature -25C to + 85C Lead Soldering Temperature (1/16 inch (1.6mm) from case for 10 secs) 260C INPUT DIODE Forward Current Reverse Voltage Power Dissipation OUTPUT TRANSISTOR Collector-emitter Voltage BVCEO Emitter-collector Voltage BVECO Collector Current IC Power Dissipation 30V 5V 20mA 75mW 50mA 5V 75mW ELECTRICAL CHARACTERISTICS ( TA = 25C Unless otherwise noted ) PARAMETER Input Forward Voltage (VF) Reverse Voltage (VR) Reverse Current (IR) Collector-emitter Breakdown (BVCEO) ( Note 1 ) Emitter-collector Breakdown (BVECO) Collector-emitter Dark Current (ICEO) MIN TYP MAX UNITS 1.0 3 1.15 1.3 10 30 5 100 V V A V V nA TEST CONDITION IF = 10mA IR = 10A VR = 3V IC = 1mA IE = 100A VCE = 24V Output Coupled Current Transfer Ratio ( CTR ) ( Note 1 ) 2 % 20mA IF , 5V VCE Collector-emitter Saturation VoltageVCE(SAT) Output Rise Time Output Fall Time Note 1 tr tf 6 6 0.4 V s s 20mA IF , 200A IC VCE = 5V , IC = 2mA,RL= 100 Special Selections are available on request. Please consult the factory. 24/9/97 DB91084-AAS/A1 Collector Power Dissipation vs. Ambient Temperature 100 Collector power dissipation PC (mW) Normalized output current 10 4 2 1 0.4 0.2 0.1 0.04 0.02 0.01 0.1 Normalized Output Current vs. Collector-emitter Voltage IF = 30mA 20mA 10mA 5mA Normalized to IF = 20mA VCE = 5V Pulsed PW = 100s PRR = 100pps 10 100 75 50 25 TA = 25C 1 0 -25 0 25 50 75 100 125 Ambient temperature TA ( C ) Forward Current vs. Ambient Temperature 60 Normalized output current 50 Forward current IF (mA) 40 30 20 10 0 -25 0 25 50 75 100 125 Ambient temperature TA ( C ) Collector-emitter saturation voltage VCE(SAT) (V) Normalized Output Current vs. Ambient Temperature 1.5 Normalized output current Collector-emitter voltage VCE ( V ) Normalized Output Current vs. Forward Current Normalized to IF = 20mA VCE = 0.4V Pulsed PW = 100s PRR = 100pps TA = 25C 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 1 2 5 10 20 50 Forward current IF (mA) Collector-emitter Saturation Voltage vs. Ambient Temperature 0.28 0.24 0.20 0.16 0.12 0.08 0.04 0 -25 0 25 50 75 100 Ambient temperature TA ( C ) DB91084-AAS/A1 IF = 20mA VCE = 5V IF = 20mA IC = 200A 1.0 0.5 0 -25 0 25 50 75 100 Ambient temperature TA ( C ) 24/9/97 |
Price & Availability of ISTS802 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |