View 2SC5568_424805.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Ordering number:ENN6308
PNP/NPN Epitaxial Planar Silicon Transistors
2SA2015/2SC5568
DC/DC Converter Applications
Applications
* Relay drivers, lamp drivers, motor drivers, strobes.
Package Dimensions
unit:mm 2163
[2SA2015/2SC5568]
4.5 1.6 1.5
Features
* Adoption of MBIT processes. * Large current capacitance. * Low collector-to-emitter saturation voltage. * High-speed switching. * Ultrasmall-sized package permitting applied sets to be made small and slim. * High allowable power dissipation.
3 0.5 0.4 1.5 3.0 0.75
2
1 0.4
1.0
2.5 4.25max
Specifications
( ) : 2SA2015 Absolute Maximum Ratings at Ta = 25C
Parameter Collector-to-Base Voltage Collector-to-Emitter Voltage Emitter-to-Base Voltage Collector Current Collector Current (Pulse) Base Current Collector Dissipation Junction Temperature Storage Temperature Symbol VCBO VCEO VEBO IC ICP IB PC Tj Tstg
Mounted on a ceramic board (250mm2x0.8mm) Tc=25C
1 : Base 2 : Collector 3 : Emitter SANYO : PCP (Bottom view)
Conditions
Ratings (-30)40 (-)30 (-)6 (-)8 (-)12 (-)1.2 1.3 3.5 150 -55 to +150
Unit V V V A A A W W
C C
Electrical Characteristics at Ta = 25C
Parameter Collector Cutoff Current Emitter Cutoff Current DC Current Gain Gain-Bandwidth Product Output Capacitance Symbol ICBO IEBO hFE fT Cob VCB=(-)30V, IE=0 VEB=(-)4V, IC=0 VCE=(-)2V, IC=(-)500mA VCE=(-)10V, IC=(-)500mA VCB=(-)10V, f=1MHz 200 (290) 320 (52)40 Conditions Ratings min typ max (-)0.1 (-)0.1 560 MHz MHz pF Unit A A
Marking : 2SA2015 : AV 2SC5568 : FE
Continued on next page.
Any and all SANYO products described or contained herein do not have specifications that can handle applications that require extremely high levels of reliability, such as life-support systems, aircraft's control systems, or other applications whose failure can be reasonably expected to result in serious physical and/or material damage. Consult with your SANYO representative nearest you before using any SANYO products described or contained herein in such applications. SANYO assumes no responsibility for equipment failures that result from using products at values that exceed, even momentarily, rated values (such as maximum ratings, operating condition ranges,or other parameters) listed in products specifications of any and all SANYO products described or contained herein.
SANYO Electric Co.,Ltd. Semiconductor Company
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
21400TS (KOTO) TA-2522 No.6308-1/5
2SA2015/2SC5568
Continued on preceding page.
Parameter Symbol Conditions IC=(-)4A, IB=(-)200mA Collector-to-Emitter Saturation Voltage VCE(sat) IC=(-)2.5A, IB=(-)50mA Base-to-Emitter Saturation Voltage Collector-to-Base Breakdown Voltage Collector-to-Emitter Breakdown Voltage Emitter-to-Base Breakdown Voltage Turn-ON Time Storage Time Fall Time VBE(sat) IC=(-)2.5A, IB=(-)50mA (-30) 40 (-)30 (-)6 30 (190) 320 15 Ratings min typ (-200) 180 (-170) 130 (-)0.85 max (-340) 270 (-290) 195 (-)1.2 Unit mV mV mV mV V V V V V ns ns ns ns
V(BR)CBO IC=(-)10A, IE=0 V(BR)CEO IC=(-)1mA, RBE= V(BR)EBO ton tstg tf IE=(-)10A, IC=0 See specified Test Circuit See specified Test Circuit See specified Test Circuit
Switching Time Test Circuit
PW=20s D.C.1% INPUT VR 50 RB + 100F + 470F IB1 IB2 OUTPUT RL
VBE=--5V VCC=12V 20IB1= --20IB2= IC=2.5A (For PNP, the polarity is reversed.)
--8
IC -- VCE
2SA2015 --90mA
Collector Current, IC - A
8
IC -- VCE
90mA
--7
Collector Current, IC - A
--5 --4 --3 --2
--40mA
--30mA --20mA --10mA
5 4 3 2 1
100m
--6
--80mA mA 00 --1
--70mA --60mA --50mA
7
70m
A
60m
A
50m
A
40mA
30mA
80mA
6
A
20mA
10mA
--1 0 0 --0.4 --0.8 --1.2 --1.6
IB=0
--2.0 IT00188
0 0
2SC5568
0.4 0.8 1.2 1.6
IB=0
2.0 IT00189
Collector-to-Emitter Voltage, VCE - V
--8 --7
Collector-to-Emitter Voltage, VCE - V
8 7
IC -- VBE
2SA2015 VCE=--2V
Collector Current, IC - A
IC -- VBE
2SC5568 VCE=2V
Collector Current, IC - A
--6 --5 --4
6 5
25C
4 3
25C
--3 --2 --1 0 0 --0.2 --0.4 --0.6 --0.8 --1.0 --1.2 --1.4
Ta= 75C
Ta=7 5
C
2 1 0 0 0.2 0.4
--25 C
0.6
0.8
--25C
1.0
1.2
1.4 IT00191
Base-to-Emitter Voltage, VBE - V
IT00190
Base-to-Emitter Voltage, VBE - V
No.6308-2/5
2SA2015/2SC5568
1000 7 5
hFE -- IC
2SA2015 VCE=--2V Ta=75C 25C --25C
1000 7 5 3 2
hFE -- IC
Ta=75C 2SC5568 VCE=2V
DC Current Gain, hFE
DC Current Gain, hFE
3 2
--25C 25C
100 7 5 3 2
100 7 5 3 2
10 --0.01
2
3
5 7 --0.1
2
3
Collector Current, IC - A
5 7 --1.0
2
3
5 7 --10 IT00192
10 0.01
2
3
5 7 0.1
2
3
Collector Current, IC - A
5 7 1.0
2
3
5 7 10 IT00193
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
3 2 --100 7 5 3 2 --10 7 5 3 2 --1.0 --0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3 5 7 --10 IT00194
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
--1000 7 5
VCE(sat) -- IC
2SA2015 IC / IB=20
1000 7 5 3 2 100 7 5 3 2 10 7 5 3 2 1.0 0.01 2 3
VCE(sat) -- IC
2SC5568 IC / IB=20
7 Ta=
5C
--25
C
25C
C 75 Ta= C --25
25C
Collector Current, IC - A
5 7 0.1
2
3
Collector Current, IC - A
5 7 1.0
2
3
5 7 10 IT00196
--1000 7
VCE(sat) -- IC
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
1000 7 5 3 2
VCE(sat) -- IC
2SC5568 IC / IB=50
Collector-to-Emitter Saturation Voltage, VCE (sat) - mV
5 3 2
2SA2015 IC / IB=50
--100 7 5 3 2 --10 --0.01
100 7 5 3 2
C 75 Ta=
C --25
25C
C 75 a= T 5C --2
2 3 5 7 0.1 2 3 5 7 1.0 2
25C
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Collector Current, IC - A
--10 7
5 7 --10 IT00195
10 0.01
3
Collector Current, IC - A
10
5 7 10 IT00197
VBE(sat) -- IC
2SA2015 IC / IB=50
Base-to-Emitter Saturation Voltage, VBE (sat) - V
VBE(sat) -- IC
2SC5568 IC / IB=50
7 5 3 2
Base-to-Emitter Saturation Voltage, VBE (sat) - V
5 3 2
--1.0 7 5 3 2
Ta=--25C 75C 25C
1.0 7 5 3 2
Ta=--25C 75C 25C
--0.1 --0.01
2
3
5 7 --0.1
2
3
5 7 --1.0
2
3
Collector Current, IC - A
5 7 --10 IT00198
0.1 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
Collector Current, IC - A
5 7 10 IT00199
No.6308-3/5
2SA2015/2SC5568
5 3
Cob -- VCB
2SA2015 f=1MHz
5 3
Cob -- VCB
2SC5568 f=1MHz
Output Capacitance, Cob - pF
Output Capacitance, Cob - pF
2 100 7 5 3 2 10 7 5 3 2 5 7 --0.1 23 5 7 --1.0 23 5 7 --10 23
2 100 7 5 3 2 10 7 5 3 2
Collector-to-Base Voltage, VCB -- V
1000 7
5 7 --100 IT00200 1000
5 7 0.1
23
5 7 1.0
23
5 7 10
23
Collector-to-Base Voltage, VCB -- V
5 7 100 IT00201
f T -- IC
2SA2015 VCE=--10V
f T -- IC
2SC5568 VCE=10V
Gain-Bandwidth Product, fT - MHz
5 3 2
Gain-Bandwidth Product, fT - MHz
7 5 3 2
100 7 5 3 2
100 7 5 3 2
10 5 7--0.01 2 3 5 7 --0.1 2 3 5 7 --1.0 2 3
10
Collector Current, IC - A
3 2 10 7 5 3 2 1.0 7 5 3 2 0.1 7 5 3 2
5 7 --10 IT00202 2.0
5 7 0.01
2
3
5 7 0.1
2
3
5 7 1.0
2
3
Collector Current, IC - A
5 7 10 IT00203
ASO
ICP IC 10ms
PC -- Ta
2SA2015 / 2SC5568
s 0 10
Collector Dissipation, PC - W
1m
10 0m
Collector Current, IC - A
s
50 0 s
1.5 1.3
DC
s
M
op
era tio n
ou
nte
1.0
do
na
ce
ram
ic
bo
ard
0.01 0.1
2SA2015 / 2SC5568 Tc=25C Single pulse For PNP, the minus sign (-) is omitted.
2 3 5 7 1.0 2 3 5 7 10 2 3 5
0.5
(25
0m
m2 x0
.8m
m)
160
0 0 20 40 60 80 100 120 140 IT00204
Collector-to-Emitter Voltage, VCE - V
4.0 3.5
Ambient Temperature, Ta - C
IT00205
PC -- Tc
2SA2015 / 2SC5568
Collector Dissipation, PC - W
3.0 2.5 2.0 1.5 1.0 0.5 0 0 20 40 60 80 100 120 140 160
Case Temperature, Tc - C
IT01534
No.6308-4/5
2SA2015/2SC5568
Specifications of any and all SANYO products described or contained herein stipulate the performance, characteristics, and functions of the described products in the independent state, and are not guarantees of the performance, characteristics, and functions of the described products as mounted in the customer's products or equipment. To verify symptoms and states that cannot be evaluated in an independent device, the customer should always evaluate and test devices mounted in the customer's products or equipment. SANYO Electric Co., Ltd. strives to supply high-quality high-reliability products. However, any and all semiconductor products fail with some probability. It is possible that these probabilistic failures could give rise to accidents or events that could endanger human lives, that could give rise to smoke or fire, or that could cause damage to other property. When designing equipment, adopt safety measures so that these kinds of accidents or events cannot occur. Such measures include but are not limited to protective circuits and error prevention circuits for safe design, redundant design, and structural design. In the event that any or all SANYO products(including technical data,services) described or contained herein are controlled under any of applicable local export control laws and regulations, such products must not be expor ted without obtaining the expor t license from the authorities concerned in accordance with the above law. No part of this publication may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying and recording, or any information storage or retrieval system, or otherwise, without the prior written permission of SANYO Electric Co., Ltd. Any and all information described or contained herein are subject to change without notice due to product/technology improvement, etc. When designing equipment, refer to the "Delivery Specification" for the SANYO product that you intend to use. Information (including circuit diagrams and circuit parameters) herein is for example only ; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties.
This catalog provides information as of February, 2000. Specifications and information herein are subject to change without notice.
PS No.6308-5/5

▲Up To Search▲

Price & Availability of 2SC5568

	To Download 2SC5568 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .