Part Number Hot Search : 
2SC1974 SK70KQ16 EN39S R3000 3KA18 B3865 SN8P250 A02HC
Product Description
Full Text Search
 

To Download WSH411 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 WSH411
Hall Effect Sensor IC with Thermal Lock Protection and Auto Restart Function
Features: Operate from 2.8V to 20V supply voltage. On-chip Hall sensor. Internal bandgap regulator allows temperature compensated operations and a wide operating voltage range. High output sinking capability up to 500mA for driving large load. Lower current change rate reduces the peak output voltages during switching. Available in rugged low profile SOT-25 , SIP-4L packages. Built-in FG output. Built-in protection diode for reverse power supply fault. Built-in thermal lock protection and auto-restart function. General Description: WSH411 is designed to integrate Hall sensor with complementary output drivers and frequency generator together on the same chip, it is suitable for speed measurement, revolution counting, positioning, and DC brushless motors. It includes a temperature compensated voltage regulator, a differential amplifier, a Hysteresis controller, two open-collector output drivers capable of sinking 1A current load and an open-collector frequency generator capable of sinking 10mA current load. An on-chip protection diode is implemented to prevent reverse power fault. And built-in thermal lock protection and auto-restart function is suitable for super high speed fan. It can replace the function of lock protection and auto restart function. The power will be shutdown automatically at 135C to prevent the coils be damaged and atuo-restart after cooling down. The temperature-dependent bias increases the supply voltage of the hall plates and adjusts the switching points to the decreasing induction of magnets at higher temperatures. Subsequently, the open collector output switches to the appropriate state. WSH411 are rated for operation over temperature range from -20 C to 100C and voltage ranges from 2.8V to 20V.
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 1
WSH411
Name VDD Vss FG OUT2 OUT1
P/I/O P P O O O
Pin#
Description Positive Power Supply Ground Frequency Generator Output Pin 2 Output Pin 1
Name Vcc OUT1 OUT2 Vss
P/I/O P O O P
Pin#
Description Positive Power Supply Output Pin #1 Output Pin #2 Ground
Name Vcc OUT1 OUT2 FG Vss
P/I/O P O O O P
Pin#
Description Positive Power Supply Output Pin #1 Output Pin #2 Frequency Generator Ground
Supply Voltage
Vcc --------------------------
20V
Output / FG breakdown Voltage Vout/Vfg --------------------- 25V Magnetic flux density B -------------------------- Unlimited Reverse Protection Voltage Output Current continuous Hold current Peak current FG ON Current (continuous) Operating Temperature Range Storage Temperature Range Package Power Dissipation Vr Ic Ih Ip If Ta ---------------------------------------------------------------------------------------------------------------------------------------------------20V 300mA 500mA 1.2A 20mA (-20C to +100C) (-65C to +150C) 350mw for SOT-25 500mw for SIP-4L SIP-5L
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 2
Ts -------------------------Pd --------------------------
WSH411
(T=+25C, Vcc=2.8V to 20V) Symbol Test Conditions Min Typ Max Units Vcc V Vout(sat) Vcc=20V, Ic=200mA V B > Bop Vfg(sat) Vcc=20V, If=10mA V B > Bop Ileakage Vcc=20V, B < Brp uA < mA 3.0 us us us
Characteristic Supply Voltage Output Saturation Voltage FG Saturation Voltage Output Leakage Current Supply Current
Isupply Vcc=20V, Output & FG Open Output / FG Rising Tr Vcc=12V, RL=820 Time CL=20Pf Output / FG Falling Tf Vcc=12V, RL=820 Time CL=20Pf Output / FG Time t Vcc=12V, RL=820 Differential CL=20Pf
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 3
WSH411
Characteristics Operate Point
Symbol Bop
Quantity Grade A Grade B Grade C Grade A Grade B Grade C
Min
Release Point Hysteresis Window
Brp Bop-Brp
Ta= -20C to +100C Typ. 25 30 50 -70 -25 -100 -30 -120 -50 40
Unit Max 50 70 120
Gauss
Gauss 200 Gauss
SIP- 4L: WSH411-XPA SIP- 5L: WSH411-XPC SOT-25: WSH411-XPD
Elec. Grade SIP-4L & SIP-5L: 1: A Grade (50 Gauss) 2: B Grade (70 Gauss) Elec. Grade 3: C Grade (120 Gauss) SOT-25: 1: A Grade (50 Gauss) 2: B Grade (70 Gauss)
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 4
WSH411
SIP-4L
SIP-5L
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 5
WSH411
SOT-25
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 6
WSH411
SOT-25
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 7
WSH411
SIP-4L
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 8
WSH411
SIP-5L
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 9
WSH411
SOT-25
Figure 1. SIP-4L
Figure 2.
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 10
WSH411
SIP-5L
Figure 3.
Winson reserves the right to make changes to improve reliability or manufacturability. (c)Winson, 2005/8/12 11


▲Up To Search▲   

 
Price & Availability of WSH411

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X