View HLMP-DB25-A0000_469009.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

T-13/4 (5 mm), T-1 (3 mm) Blue LED Lamps Technical Data
Features
* Popular T-13/4 and T-1 Diameter Packages * General Purpose Leads * Reliable and Rugged * Available on Tape and Reel * Binned for Color and Intensity
HLMP-DB25-B00xx HLMP-KB45-A00xx Description
These blue LEDs are designed in industry standard T-1 and T-13/4 package with clear and non diffused optics. They are also available in tape and reel, and ammo-pack option for ease of handling and use. These blue lamps are ideal for use as indicators and for general purpose lighting. Blue lamps offer color differentiation as blue is attractive and not widely available.
5.08 (0.200) 4.57 (0.180)
Applications
* Status Indicators * Small Message Panel * Running and Decorative Lights for Commercial Use
Package Dimensions
3.18 (0.125) 2.67 (0.105) 3.43 (0.135) 2.92 (0.115)
9.19 (0.352) 8.43 (0.332)
6.35 (0.250) 5.58 (0.220)
4.70 (0.185) 4.19 (0.165)
0.89 (0.035) 0.64 (0.025) 23.0 (0.90) MIN. 0.45 (0.018) SQUARE NOMINAL
1.02 (0.040) NOM. 23.0 MIN. (0.90)
CATHODE
0.45 (0.018) SQUARE NOM.
1.27 (0.050) NOM. 6.10 (0.240) 5.59 (0.220) CATHODE 2.54 (0.100) NOM.
1.27 (0.050) NOM.
2.54 (0.100) NOM.
HLMP-KB45
HLMP-DB25
NOTES: 1. ALL DIMENSIONS ARE IN MILLIMETERS (INCHES). 2. EPOXY MENISCUS MAY EXTEND ABOUT 1 mm (0.040") DOWN THE LEADS.
CAUTION: Devices are Class II ESD sensitive. Please observe appropriate precautions during handling and processing. Refer to Application Note AN-1142 for additional details.
2
Selection Guide
Luminous Intensity Iv (mcd) Part Number HLMP-KB45-A00xx HLMP-DB25-B00xx Package T-1 T-1 3/4 Viewing Angle 40 25 Min. 30 40 Max. - -
Part Numbering System
HLMP - x x xx - x x x xx Mechanical Option 00: Bulk 02: Tape & Reel, Straight Leads DD: Ammo Pack Color Bin Options 0: Full Color Bin Distribution Maximum Iv Bin Options 0: Open (no max. limit) Minimum Iv Bin Options Please refer to the Iv Bin Table Viewing Angle 25: 25 degrees 45: 40 degrees Color Options B: Blue 462 nm Package Options D: T-1 3/4 (5 mm) K: T-1 (3 mm)
Absolute Maximum Ratings at TA = 25C
Parameter Peak Forward Current DC Current[1] Reverse Voltage (IR = 100 A) Transient Forward Current[2] (10 sec Pulse) LED Junction Temperature Operating Temperature Storage Temperature Lead Soldering Temperature [1.6 mm (0.063 in.) from body] Blue 70 30 5 350 115 -20 to +80 -30 to +100 Units mA mA V mA C C C
260C for 5 seconds
Notes: 1. Derate linearly from 50 C as shown in Figure 6. 2. The transient peak current is the maximum non-recurring peak current that can be applied to the device without damaging the LED die and wirebond. It is not recommended that this device be operated at peak currents above the Absolute Maximum Peak Forward Current.
3
Optical Characteristics at TA = 25C
Luminous Intensity IV (mcd) @ IF = 20 mA Min. Typ. 40 100 30 45 Color, Dominant Wavelength d[1] (nm) Typ. 462 462 Peak Wavelength PEAK (nm) Typ. 426 426 Viewing Angle 21/2 [2] Degrees Typ. 25 40
Part Number HLMP-DB25-B00xx HLMP-KB45-A00xx
Notes: 1. The dominant wavelength, d, is derived from the CIE chromaticity diagram and represents the single wavelength which defines the color of the device. 2. 1/2 is the off-axis angle at which the luminous intensity is half of the axial luminous intensity.
Electrical Characteristics at TA = 25C
Forward Reverse Voltage Breakdown VF (Volts) VR (Volts) @ IF = 20 mA @ IR = 100 A Typ. Max. Min. Typ. 4.0 4.0 5.0 5.0 5.0 5.0 30 30 Thermal Resistance Capacitance RJ-PIN (C/W) C (pF), VF = 0, Junction to f = 1 MHz Cathode Lead Typ. Typ. 97 97 260 290
Part Number HLMP-DB25-B00xx HLMP-KB45-A00xx
Speed Response s (ns) Typ. 500 500
1.0
IF - FORWARD CURRENT - mA
60 50 40 30 20 10 0
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
1.6
RELATIVE INTENSITY
1.4
0.5
1.2
0 350 400 450 500 550 600 650 700 WAVELENGTH - nm
0
1
2
3
4
5
1.0 20
30
40
50
60
70
80
VF - FORWARD VOLTAGE - V
IP - PEAK FORWARD CURRENT - mA
Figure 1. Relative Intensity vs. Wavelength.
Figure 2. Forward Current vs. Forward Voltage.
Figure 3. Relative Intensity vs. Peak Forward Current (300 s pulse width, 10 ms period).
4
RATIO OF PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT
10
RELATIVE LUMINOUS INTENSITY (NORMALIZED AT 20 mA)
IF - FORWARD CURRENT - mA DC
1.2 1.1 1.0 0.9 0.8 0.7 0.6 0.5 0.4 0.3 0.2 0.1 0
35 30 25 20 15 10 5 0 0 10 20 30 40 50 60 70 80 90 TA - AMBIENT TEMPERATURE - C
100
300
10 z KH
1K Hz
3K Hz
Hz RE FR ES HR AT E
Hz
1
1.00E-06 1.00E-05 1.00E-04 1.00E-03 1.00E-02
0
5
10
15
20
25
30
35
PULSE WIDTH (SECONDS)
IF - DC FORWARD CURRENT - mA
Figure 4. Forward Current vs. Forward Voltage.
Figure 5. Relative Luminous Intensity vs. Forward Current.
Figure 6. Maximum DC Forward Current vs. Ambient Temperature. Derating Based on TJ Max. = 115 C.
20 30 40 50
10
0
1.0
.8
.6 60 70 80 90 .4
.2
10 20 30 40 50 60 70 80 90100
Figure 7. Relative Luminous Intensity vs. Angular Displacement for HLMP-DB25.
20 30 40 50
10
0
1.0
.8
.6 60 70 80 90 .4
.2
10 20 30 40 50 60 70 80 90100
Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For information on soldering LEDs, please refer to Application Note 1027.
Figure 8. Relative Luminous Intensity vs. Angular Displacement for HLMP-KB45.
5
Intensity Bin Limits
Bin A B C D E F G H J K L M N Intensity Range (mcd) Min. Max. 30.0 40.0 40.0 50.0 50.0 65.0 65.0 85.0 85.0 110.0 110.0 140.0 140.0 180.0 180.0 240.0 240.0 310.0 310.0 400.0 400.0 520.0 520.0 680.0 680.0 880.0
Color Bin Limits (nm at 20 mA)
Blue Bin ID 1 2 3 4 5 nm @ 20 mA Min. Max. 460.0 464.0 464.0 468.0 472.0 476.0 468.0 472.0 476.0 480.0
Tolerance for each bin limit will be 0.5nm.
Mechanical Option Matrix
Mechanical Option Code 00 02 DD Definition Bulk Packaging, minimum increment 500 pcs/bag Tape & Reel, straight leads, minimum increment 1300 pcs/bag Ammo Pack, straight leads with minimum increment
Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your local Agilent representative for further clarification/information.
www.agilent.com/semiconductors
For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 6756 2394 India, Australia, New Zealand: (+65) 6755 1939 Japan: (+81 3) 3335-8152 (Domestic/International), or 0120-61-1280 (Domestic Only) Korea: (+65) 6755 1989 Singapore, Malaysia, Vietnam, Thailand, Philippines, Indonesia: (+65) 6755 2044 Taiwan: (+65) 6755 1843 Data subject to change. Copyright (c) 2003 Agilent Technologies, Inc. Obsoletes 5988-2226EN May 12, 2003 5988-9507EN

▲Up To Search▲

Price & Availability of HLMP-DB25-A0000

	To Download HLMP-DB25-A0000 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .