View PS7214-1A-F4_514127.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

4 PIN SOP, 1.0 LOW ON-STATE RESISTANCE 1-CH OPTICAL COUPLED MOSFET
FEATURES
* LOW ON-STATE RESISTANCE: RON = 1.0 TYP * LARGE CONTINUOUS LOAD CURRENT: IL = 400 mA * 1 CHANNEL TYPE: 1a output * DESIGNED FOR AC/DC SWITCHING LINE CHANGER * SMALL AND THIN PACKAGE: 4 pin SOP, Height = 2.1 mm * HIGH ISOLATION VOLTAGE: (BV = 1500 Vr.m.s.) * LOW OFFSET VOLTAGE * SURFACE MOUNT TYPE LEAD: PS7214-1A-E3, E4, F3, F4
PS7214-1A
DESCRIPTION
The PS7214-1A is a low on-state resistance solid state relay containing GaAs LEDs on the light emitting side (input side) and MOS FETs on the output side. It is suitable for PLC, etc. because of its large continuous load current and low on-state resistance.
APPLICATIONS
* MEASUREMENT EQUIPMENT * FA EQUIPMENT
ELECTRICAL CHARACTERISTICS (TA = 25 C)
PART NUMBER SYMBOLS PARAMETERS Forward Voltage, IF = 10 mA Reverse Current, VR = 5 V Off-State Leakage Current, VD = 100 V Output Capacitance, VD = 0 V, f = 1 MHz LED On-State Current, IL = 400 mA On-state Resistance, IF = 10 mA, IL = 400 mA, t10 ms Turn-on Time1, IF = 10 mA, VO = 5 V, RL = 500 , PW 10 ms Turn-off Time1, IF = 10 mA, VO = 5 V, RL = 500 , PW 10 ms Isolation Resistance, VI-O = 1.0 kVDC Isolation Capacitance, V = 0 V, f = 1 MHz UNITS V A A pF mA ms ms pF 109 0.5 1.0 1.3 0.1 120 2.0 1.2 2.0 1.0 MIN PS7214-1A TYP 1.2 MAX 1.4 5.0 1.0
MOS Diode FET
VF IR ILOFF COUT IFon Ron tON tOFF RI-O CI-O
Note: 1. Test circuit for Switching Time:
IF Pulse Input VL
Input 50% 0
Coupled
PS7214-1A
4 3
Input Monitor Rin RL
VO Monitor
VO = 5 V Output
90%
1
10% ton toff
2
California Eastern Laboratories
PS7214-1A ABSOLUTE MAXIMUM RATINGS1 (TA = 25C)
SYMBOLS Diode IF VR PD IFP MOSFET VL IL ILP PD Coupled BV PT TA TSTG PARAMETERS Forward Current (DC) Reverse Voltage Power Dissipation Peak Foward Current2 Break Down Voltage Continuous Load Current Pulse Load Current3 (AC/DC Connection) Power Dissipation Isolation Voltage4 Total Power Dissipation Operating Ambient Temp. Storage Temperature UNITS mA V mW A V mA A mW Vr.m.s. mW C C RATINGS 50 5.0 50 1 100 400 0.8 300 1500 350 -40 to +85 -40 to +100
RECOMMENDED OPERATING CONDITIONS (TA = 25C)
PART NUMBER SYMBOLS PARAMETERS IF LED Operating Current VF LED Off Voltage UNITS mA V PS7214-1A MIN TYP MAX 2 10 20 0 0.5
ORDERING INFORMATION
PART NUMBER PS7214-1A PS7214-1A-E3 PS7214-1A-E4 PS7214-1A-F3 PS7214-1A-F4 Embossed tape 3500 pcs/reel PACKING STYLE Magazine case 100 pcs Embossed tape 900 pcs/reel
Notes: 1. Operation in excess of any one of these parameters may result in permanent damage. 2. PW = 100 s, Duty Cycle = 1 % 3. PW = 100 ms, 1 shot 4. AC voltage for 1 minute at TA = 25 C, RH = 60 % between input and output.
OUTLINE DIMENSIONS (Units in mm)
Top View
4.00.5
4 3
1
2
1. LED Anode 2. LED Cathode 3. MOS FET 4. MOS FET
7.00.3 4.4
2.05 -0.05
+0.08
2.0
+0.10
+0.10 0.15 -0.05
+0.08 0.05 -0.05
2.54
0.4 -0.05 0.25 M
0.50.3
PS7214-1A TYPICAL PERFORMANCE CURVES
MAXIMUM FORWARD CURRENT vs. AMBIENT TEMPERATURE
100
600
(TA = 25C) MAXIMUM LOAD CURRENT vs. AMBIENT TEMPERATURE
Maximum Forward Current, IF (mA)
80
Maximum Load Current, IL (mA)
400
60
40
200
20
0 -25 0 25 50 75
85
100
0 -25
0
25
50
75
85
100
Ambient Temperature,TA (C)
Ambient Temperature,TA (C)
FORWARD VOLTAGE vs. AMBIENT TEMPERATURE
1.8
200
OUTPUT CAPACITANCE vs. APPLIED VOLTAGE
f = 1 MHz
Forward Voltage, VF (V)
1.6
Output Capacitance, Cout (pF)
150
1.4 IF = 50 mA 1.2 30 mA 20 mA 10 mA 5 mA 1 mA
100
50
1.0
0.8 -25
0
25
50
75
100
0 0
10
20
30
40
50
60
Ambient Temperature,TA (C)
Applied Voltage, VD (V)
OFF-STATE LEAKAGE CURRENT vs. AMBIENT TEMPERATURE
LOAD CURRENT vs. LOAD VOLTAGE
IF = 10 mA IL = 400 mA 600
Off-state Leakage Current, ILoff (mA)
10 -6 VD = 100 V 10 -7
400
Load Current, IL (mA)
200
10 -8
-0.8
-0.4
0 -200
0.4
0.8
10 -9
10-10
-400
10 -11 0
-600
20
40
60
80
Ambient Temperature,TA (C)
Load Voltage, VL (V)
PS7214-1A TYPICAL PERFORMANCE CURVES
NORMALIZED ON-STATE RESISTANCE vs. AMBIENT TEMPERATURE
3.0
(TA = 25C)
ON-STATE RESISTANCE DISTRIBUTION
30 n = 50 pcs, IF = 10 mA, IL = 400 mA, f 10 ms
Normalized On-state Resistancet, Ron
2.5
Normalized to 1.0 at TA = 25C, IF = 10 mA, IL = 400 mA
25
2.0
20
Number (pcs)
1.5
15
1.0
10
0.5
5
0 -25
0
0 25 50 75 100
0.8
1.0
1.2
Ambient Temperature,TA (C)
On-state Resistance,Ron ()
TURN-ON TIME vs. FORWARD CURRENT
6.0 VO = 5 V, RL = 500 5.0
TURN-OFF TIME vs. FORWARD CURRENT
0.30 VO = 5 V, RL = 500 0.25
Turn-on Time, Ton (ms)
4.0
Turn-off Time, toff (ms)
0.20
3.0
0.15
2.0
0.10
1.0
0.05
0 0
5
10
15
20
25
30
0 0
5
10
15
20
25
30
Forward Current, IF (mA)
Forward Current, IF (mA)
TURN-ON TIME DISTRIBUTION
30 n = 50 pcs, IF = 10 mA, VO = 5 V RL = 500 30
TURN-OFF TIME DISTRIBUTION
n = 50 pcs, IF = 10 mA, VO = 5 V RL = 500
25
25
Number (pcs)
20
Number (pcs)
20
15
15
10
10
5
5
0
1.3
1.5
0
0.08
0.12
Turn-on Time, ton (ms)
Turn-off Time, toff (ms)
PS7214-1A TYPICAL PERFORMANCE CURVES
NORMALIZED TURN-ON TIME vs. AMBIENT TEMPERATURE
3.0
(TA = 25C) NORMALIZED TURN-OFF TIME vs. AMBIENT TEMPERATURE
3.0 Normalized to 1.0 at TA = 25C IF = 10 mA, VO = 5 V, RL = 500
Normalized Turn-on Time, Ron
Normalized Turn-off Time, Ron
2.5
Normalized to 1.0 at TA = 25C IF = 10 mA, VO = 5 V, RL = 500
2.5
2.0
2.0
1.5
1.5
1.0
1.0
0.5
0.5
0.0
-25
0
25
50
75
100
0.0
-25
0
25
50
75
100
Ambient Temperature, TA (C) Remark: The graphs indicate nominal characteristics.
Ambient Temperature, TA (C)
TAPING SPECIFICATIONS
Tape Outline and Dimensions
2.0 0.1 4.0 0.1 1.75 0.1 1.55 0.1 2.4 0.1
5.5 0.1 7.4 0.1 12.0 0.2
0.3 1.55 0.1 4.6 0.1 8.0 0.1
Tape Direction
PS7214-1A-E3
PS7214-1A-E4
2.0
Reel Outline and Dimensions
2.0 0.5 13 0.5
180
15
21.0 0.8
Packing: 900 pcs/reel
60
15
13.00.5
13.01.0
PS7214-1A TAPING SPECIFICATIONS
Tape Outline and Dimensions
2.0 0.1 4.0 0.1 1.75 0.1 1.55 0.1 2.4 0.1
5.5 0.1 7.4 0.1 12.0 0.2
0.3 1.55 0.1 4.6 0.1 8.0 0.1
Tape Direction PS7214-1A-F3 PS7214-1A-F4
Reel Outline and Dimensions
1.5 0.1
12
0
21.0 0.8
1.5 0.5
60
6.0 1
330
2.0 0.5
13.00.5
805.0
12.4 -0.0
+2.0
Packing: 3500 pcs/reel
RECOMMENDED SOLDERING CONDITIONS
(1) Infrared reflow soldering * Peak reflow temperature * Time of temperature higher than 210 C * Number of reflows * Flux
235 uC or below (package surface temperature) 30 seconds or less Two Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended.)
Package Surface Temperature T (C)
(heating) to 10 s 235 C (peak temperature) 210 C to 30 s 100 to 160 C 60 to 120 s (preheating)
Time (s)
(2) Dip soldering * Temperature 260 or below (package surface temperature) * Time 10 seconds or less * Number of times One * Flux Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt % is recommended).
(3) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent.
Life Support Applications These NEC products are not intended for use in life support devices, appliances, or systems where the malfunction of these products can reasonably be expected to result in personal injury. The customers of CEL using or selling these products for use in such applications do so at their own risk and agree to fully indemnify CEL for all damages resulting from such improper use or sale.
EXCLUSIVE NORTH AMERICAN AGENT FOR
RF, MICROWAVE & OPTOELECTRONIC SEMICONDUCTORS
CALIFORNIA EASTERN LABORATORIES * Headquarters * 4590 Patrick Henry Drive * Santa Clara, CA 95054-1817 * (408) 988-3500 * Telex 34-6393 * FAX (408) 988-0279 24-Hour Fax-On-Demand: 800-390-3232 (U.S. and Canada only) * Internet: http://WWW.CEL.COM DATA SUBJECT TO CHANGE WITHOUT NOTICE 06/27/2002

▲Up To Search▲

Price & Availability of PS7214-1A-F4

	To Download PS7214-1A-F4 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .