 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TFS110K1.doc version 1.0 05.01.02 ______________________________________________________________________________________________________ VI TELEFILTER Measurement Condition Ambient Temperature: Input Power Level: Terminating impedances: Input: Output: 23 C 0 dBm 700 || -13,7 pF 700 || -11,6 pF Filter specification TFS 110 K1 1/4 ______________________________________________________________________________________________________ Characteristics Remark: Reference level for the relative attenuation arel of the TFS 110 K1 is the minimum of the pass band attenuation amin. The minimum of the pass band attenuation amin is defined as the insertion loss ae. The given values for the relative attenuation arel and for the group delay ripple have to be reached at the frequencies given below also if the centre frequency fo is shifted due to the temperature coefficient of frequency TCf in the operating temperature range and due to a production tolerance for the centre frequency fo. Data typ. Value Limit ______________________________________________________________________________________________________ Insertion Loss max. 9 dB ae = amin (Reference level) ______________________________________________________________________________________________________ Nominal frequency fN 110,6 MHz ______________________________________________________________________________________________________ Relative attenuation arel fN fN 65 kHz ... fN + 65 kHz ... fN 65 kHz 82,5 kHz max. 1 dB max. 1,5 dB fN 400 kHz ... fN 800 kHz min. 22 dB 1,6 MHz min. 27 dB fN 800 kHz ... fN 1,6MHz ... fN 10 MHz min. 35 dB fN 10 MHz ... fN 25 MHz min. 45 dB fN ______________________________________________________________________________________________________ Group delay GD Ripple fN 80 kHz 300 ns max 500 ns _____________________________________________________________________________________________________ Input power level max. + 10 dBm ______________________________________________________________________________________________________ Permissible DC voltage max. 10 V ______________________________________________________________________________________________________ Operating Temperature Range - 25 C ... + 85 C ______________________________________________________________________________________________________ Generated: Checked / approved: ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS110K1.doc version 1.0 05.01.02 ______________________________________________________________________________________________________ VI TELEFILTER Filter specification TFS 110 K1 2/4 ______________________________________________________________________________________________________ Construction, pin connection and 50 - matching network (All dimensions in mm) TFS 110K1 tft L8 C1 C2 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS110K1.doc version 1.0 05.01.02 ______________________________________________________________________________________________________ VI TELEFILTER Stability characteristics Filter specification TFS 110 K1 3/4 ______________________________________________________________________________________________________ After the following tests the filter shall meet the whole specification: 1. Shock: 2. Vibration: 3. Damp heat: (cycle) 4. Resistance to solder heat (reflow): 500g, 18 ms, half sine wave, 3 shocks each plane; DIN IEC 68 T2 - 27 10 Hz to 500 Hz, 0,35 mm or 5g respectively, 1 octave per min, 10 cycles per plan, 3 plans; DIN IEC 68 T2 - 6 25 C to 55C / 95% r.H. / 10 cycles DIN IEC 68 - 2 - 30 Db max. 2 times reflow process; for temperature conditions refer to the attached "Air reflow temperature conditions" on page 4; Packing Tape & Reel: IEC 286 - 3, with exception of value for N and minimum bending radius; tape type II, embossed carrier tape with top cover tape on the upper side; max. pieces of filters per reel: Real of empty components at start: Real of empty components at start including leader: Trailer Tape (all dimensions in mm) W Po Do D1 : : : : 24 4 1,5 1,5 0,3 0,1 + 0,1 + 0,1 E Ao F W 1700 min 300 mm min 500 mm min 300 mm EMBOSSED CARRIER TAPE Do Po P2 E : F : G (min) : P2 P1 : : 1,75 0,1 11,5 0,1 0,6 2 12 0,1 0,1 D1 21,4 0,1 Bo G D1(min) : 1,5 Ao : 7,1 Bo : 13,9 P1 0,2 0,2 COVER TAPE W2 Reel (all dimensions in mm): A W1 W2 (max) : N (min) C : : : 330 24,4 +2 30,4 >= 60 C A N : - 0,2 13 + 0,5 W1 The minimum bending radius is 45 mm. The mounting surface of the filters faces the bottom side of the embossed carrier tape. The marking of the filters is able to read if the view is directed on the upper side of the carrier tape with the sprocket holes on the right side of the tap ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. TFS110K1.doc version 1.0 05.01.02 ______________________________________________________________________________________________________ VI TELEFILTER Air reflow temperature conditions Filter specification TFS 110 K1 4/4 ______________________________________________________________________________________________________ 1st and 2nd air reflow profile Name: Temperature: Time: pre-heating periods 150 C - 170 C 60 sec. - 90 sec. main-heating periods over 200 C 20 sec. - 25 sec. peak temperature 255 C 5 C Chip-mount air reflow profile 260 240 220 200 180 temperature / C 160 140 120 100 80 60 40 20 0 0 20 40 60 80 100 120 time / sec. 140 160 180 200 220 240 Table for temperature vs. time during the air reflow process Tolerance of temperatures: 5 C time / sec. 0 10 20 30 40 50 60 70 80 90 100 110 120 130 temperature / C 23 34 46 60 80 103 121 134 143 150 154 156 158 159 time / sec. 140 150 160 170 180 190 195 200 205 210 215 220 230 240 temperature / C 160 161 164 170 180 205 230 255 230 205 180 165 140 120 ______________________________________________________________________________________________________ VI TELEFILTER Vectron International, Inc. Potsdamer Strae 18 267 Lowell Road D 14 513 TELTOW / Germany Hudson, NH 03051 / USA Tel: (+49) 3328 4784-52 / Fax: (+49) 3328 4784-30 Tel: (603) 598-0070 Fax: (603) 598-0075 E-Mail: tft@telefilter.com E-Mail: vti@vtinh.com VI TELEFILTER reserves the right to make changes to the product(s) and/or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information. |
Price & Availability of TFS110K1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |