|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
PD - 95250 AUTOMOTIVE MOSFET Features Advanced Process Technology Ultra Low On-Resistance 150C Operating Temperature Fast Switching Repetitive Avalanche Allowed up to Tjmax Lead-Free IRFL024ZPBF HEXFET(R) Power MOSFET D VDSS = 55V G S RDS(on) = 57.5m ID = 5.1A Description Specifically designed for Automotive applications, this HEXFET(R) Power MOSFET utilizes the latest processing techniques to achieve extremely low on-resistance per silicon area. Additional features of this design are a 150C junction operating temperature, fast switching speed and improved repetitive avalanche rating . These features combine to make this design an extremely efficient and reliable device for use in Automotive applications and a wide variety of other applications. SOT-223 Absolute Maximum Ratings Parameter ID @ TA = 25C ID @ TA = 70C IDM Continuous Drain Current, VGS @ 10V (Silicon Limited) Continuous Drain Current, VGS @ 10V Pulsed Drain Current Max. 5.1 4.1 41 2.8 1.0 0.02 20 13 32 See Fig.12a, 12b, 15, 16 -55 to + 150 Units A PD @TA = 25C Power Dissipation PD @TA = 25C Power Dissipation Linear Derating Factor Gate-to-Source Voltage VGS EAS (Thermally limited) Single Pulse Avalanche Energy EAS (Tested ) IAR EAR TJ TSTG Single Pulse Avalanche Energy Tested Value Avalanche Current Repetitive Avalanche Energy Operating Junction and Storage Temperature Range W W/C V mJ A mJ C Thermal Resistance Parameter RJA RJA Junction-to-Ambient (PCB mount, steady state) Junction-to-Ambient (PCB mount, steady state) Typ. --- --- Max. 45 120 Units C/W www.irf.com 1 05/25/04 IRFL024ZPBF Electrical Characteristics @ TJ = 25C (unless otherwise specified) Parameter V(BR)DSS V(BR)DSS/TJ RDS(on) VGS(th) gfs IDSS IGSS Qg Qgs Qgd td(on) tr td(off) tf Ciss Coss Crss Coss Coss Coss eff. Drain-to-Source Breakdown Voltage Breakdown Voltage Temp. Coefficient Static Drain-to-Source On-Resistance Gate Threshold Voltage Forward Transconductance Drain-to-Source Leakage Current Gate-to-Source Forward Leakage Gate-to-Source Reverse Leakage Total Gate Charge Gate-to-Source Charge Gate-to-Drain ("Miller") Charge Turn-On Delay Time Rise Time Turn-Off Delay Time Fall Time Input Capacitance Output Capacitance Reverse Transfer Capacitance Output Capacitance Output Capacitance Effective Output Capacitance Min. Typ. Max. Units 55 --- --- 2.0 6.2 --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- --- 0.053 46.2 --- --- --- --- --- --- 9.1 1.9 3.9 7.8 21 30 23 340 68 39 210 55 93 --- --- 57.5 4.0 --- 20 250 200 -200 14 --- --- --- --- --- --- --- --- --- --- --- --- pF ns nC nA V V/C m V S A Conditions VGS = 0V, ID = 250A Reference to 25C, ID = 1mA VGS = 10V, ID = 3.1A VDS = VGS, ID = 250A VDS = 25V, ID = 3.1A VDS = 55V, VGS = 0V VDS = 55V, VGS = 0V, TJ = 125C VGS = 20V VGS = -20V ID = 3.1A VDS = 44V VGS = 10V VDD = 28V ID = 3.1A RG = 53 VGS = 10V VGS = 0V VDS = 25V = 1.0MHz VGS = 0V, VDS = 1.0V, = 1.0MHz VGS = 0V, VDS = 44V, = 1.0MHz VGS = 0V, VDS = 0V to 44V Source-Drain Ratings and Characteristics Parameter IS ISM VSD trr Qrr ton Continuous Source Current (Body Diode) Pulsed Source Current (Body Diode) Diode Forward Voltage Reverse Recovery Time Reverse Recovery Charge Forward Turn-On Time Min. Typ. Max. Units --- --- --- --- --- --- --- --- 15 9.8 5.1 A 41 1.3 23 15 V ns nC Conditions MOSFET symbol showing the integral reverse G S D p-n junction diode. TJ = 25C, IS = 3.1A, VGS = 0V TJ = 25C, IF = 3.1A, VDD = 28V di/dt = 100A/s Intrinsic turn-on time is negligible (turn-on is dominated by LS+LD) Notes: Repetitive rating; pulse width limited by max. junction temperature. (See fig. 11). Limited by TJmax, starting TJ = 25C, L = 2.8mH RG = 25, IAS = 3.1A, VGS =10V. Part not recommended for use above this value. Pulse width 1.0ms; duty cycle 2%. Coss eff. is a fixed capacitance that gives the same charging time as Coss while VDS is rising from 0 to 80% VDSS. Limited by T Jmax , see Fig.12a, 12b, 15, 16 for typical repetitive avalanche performance. This value determined from sample failure population. 100% tested to this value in production. When mounted on 1 inch square copper board. When mounted on FR-4 board using minimum recommended footprint. 2 www.irf.com IRFL024ZPBF 100 TOP VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V 4.5V 100 TOP VGS 15V 10V 8.0V 7.0V 6.0V 5.5V 5.0V 4.5V ID, Drain-to-Source Current (A) ID, Drain-to-Source Current (A) 10 BOTTOM BOTTOM 10 4.5V 1 4.5V 1 0.1 1 30s PULSE WIDTH Tj = 25C 10 100 30s PULSE WIDTH Tj = 150C 0.1 0.1 1 10 100 V DS, Drain-to-Source Voltage (V) V DS, Drain-to-Source Voltage (V) Fig 1. Typical Output Characteristics Fig 2. Typical Output Characteristics 100 12 Gfs, Forward Transconductance (S) ID, Drain-to-Source Current () 10 T J = 25C T J = 150C 10 8 T J = 150C 6 TJ = 25C VDS = 25V 30s PULSE WIDTH 1.0 4 5 6 7 8 9 10 4 2 V DS = 10V 0 0 2 4 6 8 10 12 ID,Drain-to-Source Current (A) VGS, Gate-to-Source Voltage (V) Fig 3. Typical Transfer Characteristics Fig 4. Typical Forward Transconductance vs. Drain Current www.irf.com 3 IRFL024ZPBF 10000 VGS = 0V, f = 1 MHZ Ciss = C gs + C gd, C ds SHORTED Crss = C gd Coss = C ds + C gd 12.0 ID= 3.1A VGS, Gate-to-Source Voltage (V) 10.0 VDS= 44V VDS= 28V VDS= 11V C, Capacitance(pF) 1000 8.0 6.0 Ciss Coss 100 4.0 Crss 2.0 10 1 10 100 0.0 0 2 4 6 8 10 VDS, Drain-to-Source Voltage (V) QG Total Gate Charge (nC) Fig 5. Typical Capacitance vs. Drain-to-Source Voltage Fig 6. Typical Gate Charge vs. Gate-to-Source Voltage 100 1000 OPERATION IN THIS AREA LIMITED BY R DS(on) TJ = 150C 10 ID, Drain-to-Source Current (A) ISD, Reverse Drain Current (A) 100 10 T J = 25C 100sec 1 T A = 25C Tj = 150C Single Pulse 0.1 1 10 1msec 10msec 100 1000 VGS = 0V 1 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 VSD, Source-to-Drain Voltage (V) VDS, Drain-to-Source Voltage (V) Fig 7. Typical Source-Drain Diode Forward Voltage Fig 8. Maximum Safe Operating Area 4 www.irf.com IRFL024ZPBF 6 2.0 RDS(on) , Drain-to-Source On Resistance (Normalized) 5 ID, Drain Current (A) ID = 3.1A VGS = 10V 4 3 1.5 2 1.0 1 0 25 50 75 100 125 150 T A ,Ambient Temperature (C) 0.5 -60 -40 -20 0 20 40 60 80 100 120 140 160 T J , Junction Temperature (C) Fig 9. Maximum Drain Current vs. Ambient Temperature 100 Fig 10. Normalized On-Resistance vs. Temperature D = 0.50 Thermal Response ( Z thJA ) 10 0.20 0.10 0.05 1 0.02 0.01 R1 R1 J 1 2 R2 R2 0.1 SINGLE PULSE ( THERMAL RESPONSE ) J 1 2 Ri (C/W) i (sec) 5.0477 0.000463 Notes: 3 19.9479 3 Factor D = t1/t2 0.636160 1. Duty R3 R3 C 0.01 1E-006 1E-005 0.0001 0.001 0.01 Ci= i/Ri Ci= i/Ri 2. Peak Tj = P dm x Zthjc21.10000 20.0169 + Tc 1 10 100 0.1 t1 , Rectangular Pulse Duration (sec) Fig 11. Maximum Effective Transient Thermal Impedance, Junction-to-Ambient www.irf.com 5 IRFL024ZPBF 60 EAS , Single Pulse Avalanche Energy (mJ) 15V 50 VDS L DRIVER ID 0.77A 0.89A BOTTOM 3.1A TOP 40 RG 20V VGS D.U.T IAS tp + V - DD A 30 0.01 20 Fig 12a. Unclamped Inductive Test Circuit V(BR)DSS tp 10 0 25 50 75 100 125 150 Starting T J , Junction Temperature (C) I AS Fig 12b. Unclamped Inductive Waveforms QG Fig 12c. Maximum Avalanche Energy vs. Drain Current 10 V QGS VG QGD VGS(th) Gate threshold Voltage (V) 4.0 3.5 Charge Fig 13a. Basic Gate Charge Waveform 3.0 ID = 250A 2.5 L DUT 0 VCC 2.0 -75 -50 -25 0 25 50 75 100 125 150 1K T J , Temperature ( C ) Fig 13b. Gate Charge Test Circuit Fig 14. Threshold Voltage vs. Temperature 6 www.irf.com IRFL024ZPBF 10 Duty Cycle = Single Pulse Avalanche Current (A) 1 0.01 Allowed avalanche Current vs avalanche pulsewidth, tav assuming Tj = 25C due to avalanche losses 0.05 0.10 0.1 0.01 1.0E-05 1.0E-04 1.0E-03 1.0E-02 1.0E-01 1.0E+00 1.0E+01 tav (sec) Fig 15. Typical Avalanche Current vs.Pulsewidth 14 12 EAR , Avalanche Energy (mJ) TOP Single Pulse BOTTOM 1% Duty Cycle ID = 3.1A 10 8 6 4 2 0 25 50 75 100 125 150 Starting T J , Junction Temperature (C) Notes on Repetitive Avalanche Curves , Figures 15, 16: (For further info, see AN-1005 at www.irf.com) 1. Avalanche failures assumption: Purely a thermal phenomenon and failure occurs at a temperature far in excess of T jmax. This is validated for every part type. 2. Safe operation in Avalanche is allowed as long asTjmax is not exceeded. 3. Equation below based on circuit and waveforms shown in Figures 12a, 12b. 4. PD (ave) = Average power dissipation per single avalanche pulse. 5. BV = Rated breakdown voltage (1.3 factor accounts for voltage increase during avalanche). 6. I av = Allowable avalanche current. 7. T = Allowable rise in junction temperature, not to exceed Tjmax (assumed as 25C in Figure 15, 16). tav = Average time in avalanche. D = Duty cycle in avalanche = tav *f ZthJC(D, tav ) = Transient thermal resistance, see figure 11) PD (ave) = 1/2 ( 1.3*BV*Iav) = T/ ZthJC Iav = 2T/ [1.3*BV*Zth] EAS (AR) = PD (ave)*tav Fig 16. Maximum Avalanche Energy vs. Temperature www.irf.com 7 IRFL024ZPBF Driver Gate Drive D.U.T + Circuit Layout Considerations * Low Stray Inductance * Ground Plane * Low Leakage Inductance Current Transformer Reverse Recovery Current P.W. Period D= P.W. Period VGS=10V * + D.U.T. ISD Waveform Body Diode Forward Current di/dt D.U.T. VDS Waveform Diode Recovery dv/dt - - + VDD RG * * * * dv/dt controlled by RG Driver same type as D.U.T. ISD controlled by Duty Factor "D" D.U.T. - Device Under Test VDD + - Re-Applied Voltage Inductor Curent Body Diode Forward Drop Ripple 5% ISD * VGS = 5V for Logic Level Devices Fig 17. Peak Diode Recovery dv/dt Test Circuit for N-Channel HEXFET(R) Power MOSFETs VDS VGS RG RD D.U.T. + -VDD 10V Pulse Width 1 s Duty Factor 0.1 % Fig 18a. Switching Time Test Circuit VDS 90% 10% VGS td(on) tr t d(off) tf Fig 18b. Switching Time Waveforms 8 www.irf.com IRFL024ZPBF SOT-223 (TO-261AA) Package Outline Dimensions are shown in milimeters (inches) SOT-223 (TO-261AA) Part Marking Information HEXFET PRODUCT MARKING THIS IS AN IRFL014 PART NUMBER INTERNATIONAL RECTIFIER LOGO LOT CODE AXXXX FL014 314P A = ASSEMBLY SITE DATE CODE CODE (YYWW) YY = YEAR WW = WEEK P = DESIGNATES LEAD-FREE PRODUCT (OPTIONAL) TOP BOTTOM www.irf.com 9 IRFL024ZPBF SOT-223 (TO-261AA) Tape & Reel Information Dimensions are shown in milimeters (inches) 4.10 (.161) 3.90 (.154) 1.85 (.072) 1.65 (.065) 0.35 (.013) 0.25 (.010) TR 2.05 (.080) 1.95 (.077) 7.55 (.297) 7.45 (.294) 7.60 (.299) 7.40 (.292) 1.60 (.062) 1.50 (.059) TYP. FEED DIRECTION 12.10 (.475) 11.90 (.469) 7.10 (.279) 6.90 (.272) 16.30 (.641) 15.70 (.619) 2.30 (.090) 2.10 (.083) NOTES : 1. CONTROLLING DIMENSION: MILLIMETER. 2. OUTLINE CONFORMS TO EIA-481 & EIA-541. 3. EACH O330.00 (13.00) REEL CONTAINS 2,500 DEVICES. 13.20 (.519) 12.80 (.504) 15.40 (.607) 11.90 (.469) 4 330.00 (13.000) MAX. 50.00 (1.969) MIN. NOTES : 1. OUTLINE COMFORMS TO EIA-418-1. 2. CONTROLLING DIMENSION: MILLIMETER.. 3. DIMENSION MEASURED @ HUB. 4. INCLUDES FLANGE DISTORTION @ OUTER EDGE. 18.40 (.724) MAX. 14.40 (.566) 12.40 (.488) 4 3 Data and specifications subject to change without notice. This product has been designed for the Automotive [Q101] market. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7903 Visit us at www.irf.com for sales contact information. 05/04 10 www.irf.com |
Price & Availability of IRFL024ZPBF |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |