 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| 1600 Watts Total Power: Input Voltages: No. of Outputs: 1600 Watts 85 - 264VAC Single AIF - PFC Series Electrical Specs Input Input range Input Surge Input Frequency Efficiency 85 - 264VAC / 120 - 370VDC (Configurable) 290VAC / 1s 50/60 Hz 95% @230Vac, 1600W (Typ) Total Harmonic Distortion Less than 10% Power Factor 0.99 typical (Po 500W); 0.97 typical (Po 1000W) Special Features * * * * * * * * * * * * * * Unity power factor High efficiency - up to 95% Universal input voltage and frequency range Up to 1600W output power Positive and Negative enable function Parallelable with accurate current sharing <10% harmonic distortion conforming to IEC1000-3-2 Compliance 100C baseplate operating temperature DC Input option Power fail warning signal Enable output to control DC-DC Converter EEPROM data storage via I2C Interface External inrush current limited protection Power Density up to 290W/in3 Control Power Fail Warning Direct drive output to opto-isolator Power Fail Warning Adjust 195 to 355Vdc adjustable LD Enable Direct drive output to opto-isolator PFC Enable TTL compatiable (Pos and Neg) Voltage Adjust 76% to 100% Vo DC Input Enable Clock Input (external sync)6Vp-p typical @ 1MHz 5% Clock Output (int. clock) 6Vp-p typical @ 1MHz 5% Temperature Monitor Output 10mV/C Current Monitor Output 0 to 1mA (1mA = 4.2A output) I2C Interface Output Output Voltage Current Share Accuracy Overvoltage Protection Power Limit for AC input 380V typical(Io =4.2A / Vi>180Vac) 393V typical (Io = 0A) 10% max 430 max Vin = 85Vac, Pmax = 1000W Vin = 230Vac, Pmax = 1600W Vin = 370Vdc, Pmax =1600W Environmental Operating temperature -40C to +100C (baseplate temperature) Storage temperature: -40C to +120C Overtemperature protection: 120C max Calculated MTBF: 450K hours for DC input Not Nominal values apply with sense pins connected and other control pin unconnected. Specifications subject to change without notice. Safety UL cUL 60950 Recognized TUV EN60950 Licensed Technical Support : (888) 41 - ASTEC or (407) 241-2752 Americas : (760) 930-4600 Europe (UK): 44 (1384) 842-211 Asia (HK): 852-2437-9662 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Fwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 Ordering Information Model Number AIF04ZPFC-01 AIF04ZPFC-02 AIF04ZPFC-01N AIF04ZPFC-02N Description 1600W Low Profile PFC Module 1600W Low Profile PFC Module Notes For parallel operation the total input current must be < 16Arms. Designed for parallel operation where the total input current >16Arms, requires external rail rectifiers. Negative Enable Negative Enable Note: 1. For Non-thread insert, add suffix "NT" Pin Assignments AIF04ZPFC-xxxNT AIF04ZPFC-xxx www.astecpower.com Rev08 September 2005 |
Price & Availability of AIF04ZPFC-01
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |