Part Number Hot Search : 
222M35V1 SRGP10Q SM6527 91600 E105M 4415GH LM766 5C6V2
Product Description
Full Text Search
 

To Download SRF-1016Z Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Reliability Qualification Report
STQ-2016Z - Matte Sn, RoHS compliant
Products Qualified by Similarity STQ-1016Z SRF-1016Z SRQ-2116Z STQ-3016Z SRF-2016Z
The information provided herein is believed to be reliable at press time. Sirenza Microdevices assumes no responsibility for inaccuracies or omissions. Sirenza Microdevices assumes no responsibility for the use of this information, and all such information shall be entirely at the user's own risk. Data subject to change. 303 S. Technology Ct, Broomfield CO, 80021 Phone: (800) SMI-MMIC http://www.sirenza.com Document RQR-104756 Rev. B
STQ-2016Z Reliability Qualification Report
I. Qualification Overview The STQ-2016Z family of products has demonstrated reliable operation by passing all qualification testing in Sirenza Microdevices' product qualification test plan. The STQ-2016Z has been subject to stresses such as humidity (autoclave), extreme hot and cold environments (temperature cycling), moisture sensitivity (MSL-1 and solder reflow testing), and several others as part of the qualification process. II. Introduction The Sirenza Microdevices' STQ-2016Z is a direct quadrature modulator targeted for use in a wide range of communications systems, including cellular/PCS, CDMA2000, UMTS, and ISM data com. This device features a wide 700-2500 MHz operating frequency band, excellent carrier and sideband suppression, and a low broadband noise floor. III. Fabrication Technology These amplifiers are manufactured using a Silicon Germanium Heterojunction Bipolar Transistor (HBT) technology. This patented self-aligned emitter, double poly HBT process has been in production by our foundry since 1998. The process has been successfully used for a wide range of RFIC products including GSM PAs, DECT front end transceivers, LNAs & VCOs. This process offers comparable performance to GaAs HBTs with the added advantages of mature and highly reproducible Silicon wafer processing. IV. Package Type The STQ-2016Z is packaged in a plastic encapsulated TSSOP-16 package that is assembled using a highly reproducible automated assembly process. The die is mounted using an industry standard thermally and electrically conductive silver epoxy. The die is mounted directly to the exposed paddle to provide a low thermal resistance path for heat conduction out of the package.
Figure 1 : Image of TSSOP -16 Exposed Paddle Plastic Package
STQ-2016Z Reliability Qualification Report
V. Qualification Methodology The Sirenza Microdevices qualification process consists of a series of tests designed to stress various potential failure mechanisms. This testing is performed to ensure that Sirenza Microdevices products are robust against potential failure modes that could arise from the various die and package failure mechanisms stressed. The qualification testing is based on JESD test methods common to the semiconductor industry. The manufacturing test specifications are used as the PASS/FAIL criteria for initial and final DC/RF tests. VI. Qualification By Similarity A device can be qualified by similarity to previously qualified products provided that no new potential failure modes/mechanisms are possible in the new design. The following products have been qualified by similarity to STQ-2016Z: STQ-1016Z STQ-3016Z SRF-1016Z SRF-2016Z SRQ-2116Z VII. Operational Life Testing Sirenza Microdevices defines operational life testing as a DC biased elevated temperature test performed at the maximum operational junction temperature limit. For the STQ-2016Z the maximum operational temperature limit is 150oC. The purpose of the operational life test is to statistically show that the product operated at its maximum operational ratings will be reliable by operating several hundred devices for a total time of 1000 hours. The results for this test are expressed in device hours that are calculated by multiplying the total number of devices passing the test by the number of hours tested.
STQ-2016Z Reliability Qualification Report
VIII. Moisture Sensitivity Level - MSL Level 1 Device STQ-2016Z has successfully completed 168 hours of moisture soak (85oC/85%RH) followed by three convection reflow cycles with a peak temperature of 270oC. The successful completion of this test classifies the part as JESD22-A113B Moisture Sensitivity Level 1 (MSL-1). MSL-1 indicates that no special dry pack requirements or time limits from opening of static bag to reflow exist for the STQ-2016Z. MSL-1 is highest level of moisture resistance that a device can be classified according to the above mentioned standard. IX. Electrostatic Discharge Classification Sirenza Microdevices classifies Human Body Model (HBM) electrostatic discharge (ESD) according to the JESD22-A114 convention. All pin pair combinations were tested. Each pin pair is stressed at one static voltage level using 1 positive and 1 negative pulse polarity to determine the weakest pin pair combination. The weakest pin pair is tested with 3 devices below and above the failure voltage to classify the part. The Pass/Fail status of a part is determined by the manufacturing test specification. The ESD class quoted indicates that the device passed exposure to a certain voltage, but does not pass the next higher level. The following table indicates the JESD ESD sensitivity classification levels.
Class 0 1A 1B 1C 2 Passes 0V 250 V 500 V 1000 V 2000 V Fails <250 V 500 V 1000 V 2000 V 4000 V
Part Number STQ-2016Z SRQ-2116Z HBM ESD Rating Class 1A Class 1A
X. Operational Life Test Results
HTOL Completion Date July 2005 Dec 2005 Test Duration 1000 hours 1000 hours Junction Temperature 150C 150C Quantity 39 40 DeviceHours 39,000 40,000
STQ-2016Z Reliability Qualification Report
XI. Qualification Test Results
Group Test Name Test Condition/ Standard MSL1 Reflow @ 270oC Peak JESD22-A113C Air to Air, Soldered on PCB -65oC to 150oC 10 min dwell, 1 min transition 1000 cycles JESD22-A104B Tj = 150C 1000 hours JESD22-A108B Tamb=110C, 85%RH Biased, 264 hours JESD22-A110B -40C to +85C Cycled bias (5' on/5'off) 1000 cycles JESD22-A109A Tamb=121C, 100%RH Un-Biased, 96 hours JESD22-A102C -65C to +150C 10 min dwell, 1 min transition 1000 cycles JESD22-A104B Sample Size 359 Results Pass
B
Preconditioning
6
Pass
B1a
Temperature Cycling
B1b
High Temperature Operating Life
79
Pass
15
Pass
B1c
HAST
10
Pass
B1d
Power Temperature Cycle
30
Pass
B2
Autoclave
60
Pass
B3
Temperature Cycle
STQ-2016Z Reliability Qualification Report
XI. Qualification Test Results
Group Test Name Test Condition/ Standard Tamb=-40C 1000 hours Tamb=-65C 1000 hours Tamb=150C 1000 hours JESD22-A103B Dip & Look Steam Age Condition C Dip Condition A, 215C JESD22-B102C G Solderability Dip & Look Steam Age Condition C Dip Condition B, 245C JESD22-B102C F Tin Whisker Tamb=60C, 90%RH 1800 hours NEMI 15 Sample Size 27 Results Pass
C
Low Temperature Storage
20 27
Pass Pass
D
High Temperature Storage
30
Pass
10
Pass
STQ-2016Z Reliability Qualification Report
XII. Junction Temperature Determination One key issue in performing qualification testing is to accurately determine the junction temperature of the device. Sirenza Microdevices uses a 3um spot size emissivity corrected infrared camera measurement to resolve the surface temperature of the device at the maximum operational power dissipation. The results are displayed below for the STQ-2016Z device running at operational current of Id= 80mA, a device voltage of 5V, and lead temperature of 85C.
Figure 2: Infrared Thermal Image of STQ-2016Z, Vd = 5.0V, Id =80mA, Tj = 98C
Figure 3: Infrared Thermal Image of SRQ-2116Z, Vd = 5.0V, Id =157mA, Tj = 103.8C
STQ-2016Z Reliability Qualification Report
XIII. FIT Calculation from Accelerated Life Test Data The following data demonstrates the results from accelerated life tests performed on the Sirenza 4A SiGe HBT Process. The test was performed on 791 units running at a peak junction temperature up to 195oC. The FIT rate calculation can be found below. The FIT rates were generated assuming 1 failure. In reality, there were no failures, making this a very conservative calculation.
Activation Energy (eV) FIT (per 109 dev-hours) @ Tj=55oC, 60% CL
0.7 0.73
Table 3: Activation Energy and calculated FIT for STQ-2016Z.


▲Up To Search▲   

 
Price & Availability of SRF-1016Z

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X