View 3D3220-25_602552.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

3D3220
MONOLITHIC 10-TAP FIXED DELAY LINE (SERIES 3D3220)
FEATURES
* * * * * * * * * * * *
PACKAGES
IN N/C O2 O4 O6 O8 GND 1 2 3 4 5 6 7 14 13 12 11 10 9 8 VDD O1 O3 O5 O7 O9 O10
All-silicon, low-power CMOS technology IN 1 14 VDD TTL/CMOS compatible inputs and outputs N/C 2 13 O1 Vapor phase, IR and wave solderable O2 3 12 O3 Auto-insertable (DIP pkg.) O4 4 11 O5 Low ground bounce noise Leading- and trailing-edge accuracy O6 5 10 O7 Delay range: 0.75ns through 7000ns O8 6 9 O9 Delay tolerance: 2% or 0.5ns GND 7 8 O10 Temperature stability: 2% typical (-40C to 85C) 3D3220-xx DIP Vdd stability: 1% typical (3.0V-3.6V) 3D3220G-xx Gull-Wing Minimum input pulse width: 15% of total delay 14-pin Gull-Wing available as drop-in For mechanical dimensions, click here. replacement for hybrid delay lines For package marking details, click here.
3D3220D-xx SOIC
IN N/C N/C O2 O4 O6 O8 GND 1 2 3 4 5 6 7 8 16 15 14 13 12 11 10 9 VDD N/C O1 O3 O5 O7 O9 O10
3D3220S-xx SOL
FUNCTIONAL DESCRIPTION
The 3D3220 10-Tap Delay Line product family consists of fixed-delay CMOS integrated circuits. Each package contains a single delay line, tapped and buffered at 10 points spaced uniformly in time. Tap-to-tap (incremental) delay values can range from 0.75ns through 700ns. The input is reproduced at the outputs without inversion, shifted in time as per the user-specified dash number. The 3D3220 is TTL- and CMOScompatible, capable of driving ten 74LS-type loads, and features both rising- and falling-edge accuracy. The all-CMOS 3D3220 integrated circuit has been designed as a reliable, economic alternative to hybrid TTL fixed delay lines. It is offered in a standard 14-pin auto-insertable DIP and space saving surface mount 14-pin SOIC and 16-pin SOL packages.
PIN DESCRIPTIONS
IN O1 O2 O3 O4 O5 O6 O7 O8 O9 O10 VDD GND Delay Line Input Tap 1 Output (10%) Tap 2 Output (20%) Tap 3 Output (30%) Tap 4 Output (40%) Tap 5 Output (50%) Tap 6 Output (60%) Tap 7 Output (70%) Tap 8 Output (80%) Tap 9 Output (90%) Tap 10 Output (100%) +3.3 Volts Ground
TABLE 1: PART NUMBER SPECIFICATIONS
DASH NUMBER -.75 -1 -1.5 -2 -2.5 -4 -5 -10 -20 -50 -100 -700 TOLERANCES TOTAL TAP-TAP DELAY (ns) DELAY (ns) 6.75 0.5* 0.75 0.4 9.0 0.5* 1.0 0.5 13.5 0.5* 1.5 0.7 18.0 0.5* 2.0 0.8 22.5 0.5* 2.5 1.0 36.0 0.7* 4.0 1.3 50.0 1.0 5.0 1.5 100.0 2.0 10.0 2.0 200.0 4.0 20.0 4.0 500.0 10 50.0 10 1000 20 100 20 7000 140 700 140 Rec'd Max Frequency 28.4 MHz 23.8 MHz 18.0 MHz 14.5 MHz 12.1 MHz 8.33 MHz 6.67 MHz 3.33 MHz 1.67 MHz 0.67 MHz 0.33 MHz 0.05 MHz INPUT RESTRICTIONS Absolute Max Rec'd Min Frequency Pulse Width 166.7 MHz 17.6 ns 166.7 MHz 21.0 ns 166.7 MHz 27.8 ns 166.7 MHz 34.5 ns 125.0 MHz 41.2 ns 133.3 MHz 60.0 ns 66.7 MHz 75.0 ns 33.3 MHz 150 ns 16.7 MHz 300 ns 6.67 MHz 750 ns 3.33 MHz 1500 ns 0.48 MHz 10500 ns Absolute Min Pulse Width 3.00 ns 3.00 ns 3.00 ns 3.00 ns 4.00 ns 6.00 ns 7.50 ns 15.0 ns 30.0 ns 75.0 ns 150 ns 1050 ns 2005 Data Delay Devices
* Total delay referenced to Tap1 output; Input-to-Tap1 = 7.5ns 1.0ns NOTE: Any dash number between .75 and 700 not shown is also available as standard.
Doc #05001
12/22/05
DATA DELAY DEVICES, INC.
3 Mt. Prospect Ave. Clifton, NJ 07013
1
3D3220
APPLICATION NOTES
OPERATIONAL DESCRIPTION
The 3D3220 ten-tap delay line architecture is shown in Figure 1. The delay line is composed of a number of delay cells connected in series. Each delay cell produces at its output a replica of the signal present at its input, shifted in time. The delay cells are matched and share the same compensation signals, which minimizes tap-totap delay deviations over temperature and supply voltage variations. To guarantee the Table 1 delay accuracy for input frequencies higher than the Maximum Operating Frequency, the 3D3220 must be tested at the user operating frequency. Therefore, to facilitate production and device identification, the part number will include a custom reference designator identifying the intended frequency of operation. The programmed delay accuracy of the device is guaranteed, therefore, only at the user specified input frequency. Small input frequency variation about the selected frequency will only marginally impact the programmed delay accuracy, if at all. Nevertheless, it is strongly recommended that the engineering staff at DATA DELAY DEVICES be consulted.
INPUT SIGNAL CHARACTERISTICS
The Frequency and/or Pulse Width (high or low) of operation may adversely impact the specified delay accuracy of the particular device. The reasons for the dependency of the output delay accuracy on the input signal characteristics are varied and complex. Therefore a Maximum and an Absolute Maximum operating input frequency and a Minimum and an Absolute Minimum operating pulse width have been specified.
OPERATING PULSE WIDTH
The Absolute Minimum Operating Pulse Width (high or low) specification, tabulated in Table 1, determines the smallest Pulse Width of the delay line input signal that can be reproduced, shifted in time at the device output, with acceptable pulse width distortion. The Minimum Operating Pulse Width (high or low) specification determines the smallest Pulse Width of the delay line input signal for which the output delay accuracy tabulated in Table 1 is guaranteed. To guarantee the Table 1 delay accuracy for input pulse width smaller than the Minimum Operating Pulse Width, the 3D3220 must be tested at the user operating pulse width. Therefore, to facilitate production and device identification, the part number will include a
O5 O6 O7 O8 O9 O10
OPERATING FREQUENCY
The Absolute Maximum Operating Frequency specification, tabulated in Table 1, determines the highest frequency of the delay line input signal that can be reproduced, shifted in time at the device output, with acceptable duty cycle distortion. The Maximum Operating Frequency specification determines the highest frequency of the delay line input signal for which the output delay accuracy is guaranteed.
IN
O1
O2
O3
O4
10%
10%
10%
10%
10%
10%
10%
10%
10%
10%
Temp & VDD Compensation
VDD Figure 1: 3D3220 Functional Diagram
GND
Doc #05001
12/22/05
DATA DELAY DEVICES, INC.
Tel: 973-773-2299 Fax: 973-773-9672 http://www.datadelay.com
2
3D3220
APPLICATION NOTES (CONT'D)
custom reference designator identifying the intended frequency and duty cycle of operation. The programmed delay accuracy of the device is guaranteed, therefore, only for the user specified input characteristics. Small input pulse width variation about the selected pulse width will only marginally impact the programmed delay accuracy, if at all. Nevertheless, it is strongly recommended that the engineering staff at DATA DELAY DEVICES be consulted. circuitry to minimize the delay variations induced by fluctuations in power supply and/or temperature. The thermal coefficient is reduced to 250 PPM/C, which is equivalent to a variation, over the -40C to 85C operating range, of 2% from the roomtemperature delay settings and/or 1.0ns, whichever is greater. The power supply coefficient is reduced, over the 3.0V-3.6V operating range, to 1% of the delay settings at the nominal 3.3VDC power supply and/or 1.0ns, whichever is greater. It is essential that the power supply pin be adequately bypassed and filtered. In addition, the power bus should be of as low an impedance construction as possible. Power planes are preferred.
POWER SUPPLY AND TEMPERATURE CONSIDERATIONS
The delay of CMOS integrated circuits is strongly dependent on power supply and temperature. The monolithic 3D3220 programmable delay line utilizes novel and innovative compensation
DEVICE SPECIFICATIONS
TABLE 2: ABSOLUTE MAXIMUM RATINGS
PARAMETER DC Supply Voltage Input Pin Voltage Input Pin Current Storage Temperature Lead Temperature SYMBOL VDD VIN IIN TSTRG TLEAD MIN -0.3 -0.3 -1.0 -55 MAX 7.0 VDD+0.3 1.0 150 300 UNITS V V mA C C NOTES
25C 10 sec
TABLE 3: DC ELECTRICAL CHARACTERISTICS
(-40C to 85C, 3.0V to 3.6V) PARAMETER Static Supply Current* High Level Input Voltage Low Level Input Voltage High Level Input Current Low Level Input Current High Level Output Current Low Level Output Current Output Rise & Fall Time SYMBOL IDD VIH VIL IIH IIL IOH IOL TR & TF MIN 2.0 0.8 1.0 1.0 -4.0 TYP 3.5 MAX 5.5 UNITS mA V V A A mA mA 2.5 ns NOTES
-15.0 4.0 15.0 2.0
VIH = VDD VIL = 0V VDD = 3.0V VOH = 2.4V VDD = 3.0V VOL = 0.4V CLD = 5 pf
*IDD(Dynamic) = 10 * CLD * VDD * F where: CLD = Average capacitance load/tap (pf) F = Input frequency (GHz)
Input Capacitance = 10 pf typical Output Load Capacitance (CLD) = 25 pf max
Doc #05001
12/22/05
DATA DELAY DEVICES, INC.
3 Mt. Prospect Ave. Clifton, NJ 07013
3
3D3220
SILICON DELAY LINE AUTOMATED TESTING
TEST CONDITIONS
INPUT: Ambient Temperature: 25oC 3oC Supply Voltage (Vcc): 3.3V 0.1V Input Pulse: High = 3.0V 0.1V Low = 0.0V 0.1V Source Impedance: 50 Max. Rise/Fall Time: 3.0 ns Max. (measured between 0.6V and 2.4V ) Pulse Width: PWIN = 1.25 x Total Delay Period: PERIN = 2.5 x Total Delay OUTPUT: Rload: Cload: Threshold: 10K 10% 5pf 10% 1.5V (Rising & Falling)
Device Under Test
10K 5pf
Digital Scope
470
NOTE: The above conditions are for test only and do not in any way restrict the operation of the device.
COMPUTER SYSTEM
PRINTER
PULSE GENERATOR
OUT TRIG IN
DEVICE UNDER TEST (DUT)
OUT1 OUT2 OUT3 OUT4 OUT5 OUT6 OUT7 OUT8 OUT9 OUT10
REF IN TRIG DIGITAL SCOPE/ TIME INTERVAL COUNTER
Figure 2: Test Setup PERIN PW IN tRISE INPUT SIGNAL
2.4V 1.5V 0.6V
tFALL VIH
2.4V 1.5V 0.6V
VIL tPHL
tPLH OUTPUT SIGNAL
1.5V
VOH
1.5V
VOL
Figure 3: Timing Diagram
Doc #05001
12/22/05
DATA DELAY DEVICES, INC.
Tel: 973-773-2299 Fax: 973-773-9672 http://www.datadelay.com
4

▲Up To Search▲

Price & Availability of 3D3220-25

	To Download 3D3220-25 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .