 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| RoHS Compliant Amplifier, Power, 1.6W 12.75-15.35 GHz Features 1.6 Watt Saturated Output Power Level Variable Drain Voltage (6-10V) Operation TM MSAG Process MAAP-000071-PKG003 Rev -- Advance Information VGG (PIN 20) VD12 Description The MAAP-000071-PKG0003 is a 4-stage 1.6 W power amplifier with on-chip bias networks in a 20 lead MLP package, allowing easy assembly. This product is fully matched to 50 ohms on both the input and output. It can be used as a power amplifier stage or as a driver stage in high power applications. Each device is 100% RF tested to ensure performance compliance. The part is fabricated using M/A-COM's GaAs Multifunction SelfAligned Gate (MSAG) Process. M/A-COM's MSAGTM process features robust silicon-like manufacturing processes, planar processing of ion implanted transistors and multiple implant capability enabling power, low-noise, switch and digital FETs on a single chip. The use of refractory metals and the absence of platinum in the gate metal formulation prevents hydrogen poisoning when employed in hermetic packaging. (PIN 1) N/C N/C RF IN N/C N/C VD3 N/C N/C YYWW AP071G XXXX MACOM N/C VGG N/C VD12 VD3 N/C N/C RF OUT N/C N/C Primary Applications Point-to-Point Radios 13 and 15 GHz Bands Also Available in: Description Part Number Die MAAPGM0071-DIE Ceramic Package MAAPGM0071 Die Sample Board MAAP-000071-SMB004 Die Mechanical Sample MAAP-000071-MCH000 Packaged Sample Board MAAP-000071-SMB003 (Lead Free) Electrical Characteristics: TB = 30C1, Z0 = 50 , VDD = 8V, IDQ = 900mA2, Pin = 10 dBm, RG = 100 Parameter Bandwidth Output Power 1-dB Compression Point Power Added Efficiency Small Signal Gain Input VSWR Output VSWR Gate Current Drain Current Output Third Order Intercept Third Order Intermod, Pout = 26 dBm (DCL) 1. 2. Symbol f POUT P1dB PAE G VSWR VSWR IGG IDD TOI IM3 Typical 12.75-15.35 32 31 19 24 1.4:1 2.7:1 10 1400 40 33 mA mA dBm dBc Units GHz dBm dBm % dB 1 TB = MMIC Base Temperature Adjust VGG between -2.6 and -1.2V to achieve specified Idq. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Amplifier, Power, 1.6W 12.75-15.35 GHz Maximum Ratings3 Parameter Input Power Drain Supply Voltage Gate Supply Voltage Quiescent Drain Current (No RF) Quiescent DC Power Dissipated (No RF) Junction Temperature Storage Temperature Symbol PIN VDD VGG IDQ PDISS TJ TSTG Absolute Maximum 15.0 +12.0 -3.0 1.42 14.2 170 -55 to +150 Units dBm V V A W C C MAAP-000071-PKG003 Rev -- Advance Information 3. Operation beyond these limits may result in permanent damage to the part. Recommended Operating Conditions4 Characteristic Drain Voltage Gate Voltage Input Power Thermal Resistance MMIC Base Temperature Symbol VDD VGG PIN JC TB Min 6.0 -2.6 Typ 8.0 -2.0 10.0 10.8 Note 5 Max 10.0 -1.2 14.0 Unit V V dBm C/W C 4. Operation outside of these ranges may reduce product reliability. 5. MMIC Base Temperature = 170C -- JC* VDD * IDQ Operating Instructions This device is static sensitive. Please handle with care. To operate the device, follow these steps. 1. Apply VGG = -2.7 V, VDD= 0 V. 2. Ramp VDD to desired voltage, typically 8.0 V. 3. Adjust VGG to set IDQ, (approximately @ -2.0 V). 4. Set RF input. 5. Power down sequence in reverse. Turn VGG off last. 2 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Amplifier, Power, 1.6W 12.75-15.35 GHz MAAP-000071-PKG003 Rev -- Advance Information Figure 1. 5x5 mm 20-Lead MLP. VDD 100pF* VGG (PIN 20) 100pF* 100pF* 0.1F VD12 (PIN 1) N/C N/C RF IN N/C N/C VD3 N/C N/C YYWW AP071G XXXX MACOM N/C N/C VD12 VGG VD3 N/C N/C RF OUT N/C N/C VGG 0.1F 100pF* 100pF* 100pF* * Place 100pF capacitors as close to the package as possible. Figure 2. Recommended Bias Configuration. Note: The exposed pad centered on the package bottom must be connected to RF and dc ground for proper electrical and thermal operation. Refer to M/A-COM Application Note Surface Mounting Instructions for PQFN Packages #S2083* for assembly guidelines. Additional Precaution: All parts must receive a bake-out of 125C for 24 hours prior to any solder reflow operation. *Application Notes can be found by going to the Site Search Page of M/A-COM's web page (http://www.macom.com/Application%20Notes/ index.htm) and searching for the required Application Note. M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. 3 * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. RoHS Compliant Amplifier, Power, 1.6W 12.75-15.35 GHz MAAP-000071-PKG003 Rev -- Advance Information YYWW APO71G XXXX MACOM Figure 3. Demonstration Board PN MAAP-000071-SMB003 (available upon request). 4 M/A-COM Inc. and its affiliates reserve the right to make changes to the product(s) or information contained herein without notice. M/A-COM makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does M/A-COM assume any liability whatsoever arising out of the use or application of any product(s) or information. * North America Tel: 800.366.2266 / Fax: 978.366.2266 * Europe Tel: 44.1908.574.200 / Fax: 44.1908.574.300 * Asia/Pacific Tel: 81.44.844.8296 / Fax: 81.44.844.8298 Visit www.macom.com for additional data sheets and product information. |
Price & Availability of MAAP-000071-SMB003
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |