|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Bulletin PD-2.055 rev. E 11/02 60HQ... SERIES SCHOTTKY RECTIFIER 60 Amp TO-203AB (DO-5) Major Ratings and Characteristics Characteristics IF(AV) Rectangular waveform VRRM range IFSM @ tp = 5 s sine VF TJ @ 60 Apk, TJ=125C range 60, 80 to 100 8400 0.70 - 65 to 175 V A V C Description/ Features Units A The 60HQ Schottky rectifier series has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, free-wheeling diodes, and reverse battery protection. 175 C TJ operation Low forward voltage drop High frequency operation Guard ring for enhanced ruggedness and long term reliability Hermetic packaging 60HQ... 60 Conforms to JEDEC Outline DO-203AB (DO-5) Dimensions in millimeters and (inches) www.irf.com 1 60HQ... Series Bulletin PD-2.055 rev. E 11/02 Voltage Ratings Part number VR Max. DC Reverse Voltage (V) 60 80 90 100 VRWM Max. Working Peak Reverse Voltage (V) 60HQ060 60HQ080 60HQ090 60HQ100 Absolute Maximum Ratings Parameters IF(AV) Max. Average Forward Current * See Fig. 5 IFSM EAS IAR Max. Peak One Cycle Non-Repetitive Surge Current * See Fig. 7 Non-Repetitive Avalanche Energy Repetitive Avalanche Current 60HQ Units 60 8400 1200 15 1 A Conditions 50% duty cycle @ TC = 118 C, rectangular wave form 5s Sine or 3s Rect. pulse 10ms Sine or 6ms Rect. pulse Following any rated load condition and with rated VRRM applied A mJ A TJ = 25 C, IAS = 1 Amps, L = 30 mH Current decaying linearly to zero in 1 sec Frequency limited by TJ max. VA = 1.5 x VR typical Electrical Specifications Parameters VFM Max. Forward Voltage Drop * See Fig. 1 (1) 60HQ 0.89 1.09 0.70 0.84 Units V V V V mA mA pF nH V/ s @ 60A @ 120A @ 60A @ 120A TJ = 25 C TJ = 125 C Conditions TJ = 25 C TJ = 125 C VR = rated VR IRM CT LS Max. Reverse Leakage Current (1) * See Fig. 2 Max. Junction Capacitance Typical Series Inductance 1.5 20 1400 7.5 10000 VR = 5VDC, (test signal range 100Khz to 1Mhz) 25 C Measured from top of terminal to mounting plane dv/dt Max. Voltage Rate of Change (Rated VR) (1) Pulse Width < 300s, Duty Cycle < 2% Thermal-Mechanical Specifications Parameters TJ Tstg Max. Junction Temperature Range Max. Storage Temperature Range 60HQ -65 to 175 -65 to 175 0.83 0.25 Units C C C/W C/W DC operation Conditions RthJC Max. Thermal Resistance Junction to Case RthCS Typical Thermal Resistance, Case to Heatsink wt T Approximate Weight Mounting Torque Case Style Min. Max. * See Fig. 4 Mounting surface , smooth and greased 15 (0.53) g (oz.) 23 (20) 46 (40) Kg-cm Non-lubricated threads (Ibf-in) DO-203AB(DO-5) JEDEC 2 www.irf.com 60HQ... Series Bulletin PD-2.055 rev. E 11/02 1000 1000 100 10 1 0.1 0.01 0.001 TJ = 175C TJ = 125C TJ = 25C Junction Capacitance - C T (pF) 10000 TJ = 175C 150C 125C 100C 75C 50C 25C 100 Instantaneous Forward Current - I F (A) Reverse Current - I R (mA) 0 20 40 60 80 100 10 Reverse Voltage - V R (V) Fig. 2 - Typical Values of Reverse Current Vs. Reverse Voltage 1 T J = 25C 1000 0.1 0 0.2 0.4 0.6 0.8 1 1.2 1.4 100 0 10 20 30 40 50 60 70 80 90 100110 Reverse Voltage - VR (V) Forward Voltage Drop - VFM (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics 1 Thermal Impedance - Z thJC (C/W) D = 0.50 D = 0.33 D = 0.25 0.1 D = 0.17 D = 0.08 Fig. 3 - Typical Junction Capacitance Vs. Reverse Voltage PDM 0.01 Single Pulse (Thermal Resistance) 0.001 0.00001 0.0001 0.001 0.01 0.1 Notes: t1 t2 1. Duty factor D = t 1 / t 2 2. Peak TJ = PDM x Z thJC+ T C 1 10 100 t 1 , Rectangular Pulse Duration (Seconds) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics www.irf.com 3 60HQ... Series Bulletin PD-2.055 rev. E 11/02 180 Allowable Case Temperature - (C) Average Power Loss - (Watts) 170 160 150 140 130 120 DC R thJC (DC) = 0.83C/W 60 50 40 30 20 10 0 0 10 20 30 40 50 60 70 80 90 Average Forward Current - I F(AV) (A) RMS Limit D = 0.08 D = 0.17 D = 0.25 D = 0.33 D = 0.50 DC 0 20 40 60 80 100 Average Forward Current - I F(AV) (A) Fig. 5 - Maximum Allowable Case Temperature Vs. Average Forward Current 10000 Non-Repetitive Surge Current - I FSM (A) Fig. 6 - Forward Power Loss Characteristics At Any Rated Load Condition And With Rated VRRM Applied Following Surge 1000 10 100 1000 10000 Square Wave Pulse Duration - t p (microsec) Fig. 7 - Maximum Non-Repetitive Surge Current L HIGH-SPEED SWITCH FREE-WHEEL DIODE 40HFL40S02 + DUT IRFP460 Rg = 25 ohm Vd = 25 Volt CURRENT MONITOR Fig. 8 - Unclamped Inductive Test Circuit 4 www.irf.com 60HQ... Series Bulletin PD-2.055 rev. E 11/02 Data and specifications subject to change without notice. This product has been designed for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 11/02 www.irf.com 5 |
Price & Availability of 60HQ080 |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |