 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| HN2D02FUTW1T1 Ultra High Speed Switching Diodes These Silicon Epitaxial Planar Diodes are designed for use in ultra high speed switching applications. These devices are housed in the SC-88 package which is designed for low power surface mount applications. * Fast trr, < 3.0 ns * Low CD, < 2.0 pF * Available in 8 mm Tape and Reel Use HN2D02FUTW1T1 to order the 7 inch/3000 unit reel. MAXIMUM RATINGS (TA = 25C) Rating Reverse Voltage Peak Reverse Voltage Forward Current Peak Forward Current Peak Forward Surge Current (10 ms) Symbol VR VRM IF IFM IFSM (Note 1) Value 80 85 100 240 1.0 mAdc mAdc mAdc 6 5 4 Unit http://onsemi.com 6 5 4 1 2 3 SC-88 CASE 419B THERMAL CHARACTERISTICS Rating Power Dissipation Junction Temperature Storage Temperature Symbol PD TJ Tstg Max 300 150 -55 to + 150 Unit mW C C 1 2 3 1. t = 10 ms 2. This is maximum rating for a single diode. Derate by 75 percent when using 2 or 3 diodes. MARKING DIAGRAM R7 M R7 = for Specified Device Code M = Date Code (c) Semiconductor Components Industries, LLC, 2004 1 January, 2004 - Rev. 1 Publication Order Number: HN2D02FUTW1T1/D HN2D02FUTW1T1 ELECTRICAL CHARACTERISTICS (TA = 25C) Characteristic Reverse Voltage Leakage Current Symbol IR Condition VR = 35 V VR = 75 V Forward Voltage Reverse Breakdown Voltage Diode Capacitance Reverse Recovery Time (Figure 1) 3. trr Test Circuit VF VR CD trr (Note 3) IF = 100 mA IR = 100 mA VR = 0, f = 1.0 MHz IF = 10 mA, VR = 6.0 V, RL = 100 W, Irr = 0.1 IR Min -- -- -- 80 -- -- Max 0.1 0.1 1.2 -- 2.0 3.0 Vdc Vdc pF ns Unit mAdc RECOVERY TIME EQUIVALENT TEST CIRCUIT INPUT PULSE tr tp t OUTPUT PULSE IF trr t A RL 10% Irr = 0.1 IR 90% VR tp = 2 ms tr = 0.35 ns IF = 10 mA VR = 6 V RL = 100 W Figure 1. Reverse Recovery Time Equivalent Test Circuit http://onsemi.com 2 HN2D02FUTW1T1 100 IF, FORWARD CURRENT (mA) I R, REVERSE CURRENT ( A) 10 TA = 150C 1.0 TA = 125C 10 TA = 85C 1.0 TA = 25C TA = -40C 0.1 0.2 0.4 0.6 0.8 1.0 1.2 0.1 TA = 85C TA = 55C 0.01 TA = 25C 0 10 20 30 40 50 VR, REVERSE VOLTAGE (VOLTS) 0.001 VF, FORWARD VOLTAGE (VOLTS) Figure 2. Forward Voltage 0.68 CD , DIODE CAPACITANCE (pF) Figure 3. Leakage Current 0.64 0.60 0.56 0.52 0 2 4 6 8 VR, REVERSE VOLTAGE (VOLTS) Figure 4. Capacitance http://onsemi.com 3 HN2D02FUTW1T1 PACKAGE DIMENSIONS SC-88 (SOT-363) CASE 419B-02 ISSUE N A G NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 419B-01 OBSOLETE, NEW STANDARD 419B-02. 4 INCHES MIN MAX 0.071 0.087 0.045 0.053 0.031 0.043 0.004 0.012 0.026 BSC --- 0.004 0.004 0.010 0.004 0.012 0.008 REF 0.079 0.087 MILLIMETERS MIN MAX 1.80 2.20 1.15 1.35 0.80 1.10 0.10 0.30 0.65 BSC --- 0.10 0.10 0.25 0.10 0.30 0.20 REF 2.00 2.20 6 5 S 1 2 3 -B- D 6 PL 0.2 (0.008) N M B M DIM A B C D G H J K N S J C H K ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: orderlit@onsemi.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada Japan: ON Semiconductor, Japan Customer Focus Center 2-9-1 Kamimeguro, Meguro-ku, Tokyo, Japan 153-0051 Phone: 81-3-5773-3850 ON Semiconductor Website: http://onsemi.com Order Literature: http://www.onsemi.com/litorder For additional information, please contact your local Sales Representative. http://onsemi.com 4 HN2D02FUTW1T1/D |
Price & Availability of HN2D02FUTW1T1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |