Part Number Hot Search : 
TOP247F 025001 200001 TF14N50 SD1030T 80N15 A1600 000950
Product Description
Full Text Search
 

To Download DBNE-9P-L0-E03-A191 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Eurostyle D Subminiature Connectors
Cannon
Eurostyle D Subminiature Connectors
Introduction
The D Subminiature Eurostyle connector is a product line extension of the well known D Subminiature family originally invented by ITT Industries, Cannon. It is a special low profile 90 solder pin connector acc. to the CECC75 301 802 European specification. It replaces the D* version with the code 1AEN which was not 100% in line with above mentioned specification.
Introduction
The main applications will be found in industrial as well as in telecommunication equipment. The major advantage for the end user is to achieve additional space due to the low profile configuration. The D Subminiature Eurostyle connectors are fully mateable with all standard D Subminiature connectors according to DIN 41652.
Product features
Meets European Eurostyle specification CECC75 301 802 Available in all common layouts (9, 15, 25, 37-way), male and female Available in Performance Classes 1, 2 and 3 according to DIN 41652 Clinch nut with M3 or4-40 UNC thread Jack Post with M3 or 4-40 UNC thread
Technical Data
Materials and Finishes Shell Insulator Contacts Boardlock / Grounding Insert Threaded insert
Steel, tin plated Thermoplastic, UL 94V-0 Copper alloy, gold over nickel plated Brass, tin plated Steel, tin plated
Electrical Data Current rating temperature Test voltage Insulation resistance Contact resistance
5 A / 25C, 3,5 A / 70C ambient 1000 V ac rms at sea level 5 G min. 25 m
Mechanical Data Polarizing Number of contacts Termination method CECC 75301802 Performance class 3 (Standard) Performance class 2 Performance class 1 Operating temperature
Keystone shaped front shell 9, 15, 25 and 37 Solder pin 90 Eurostyle acc. 50 mating cycles (without code) 200 mating cycles (code -A191) 500 mating cycles (code -A190) - 55C to 125C
Cannon
2
Dimensions are shown in mm Dimensions subject to change
www.ittcannon.com
Eurostyle D Subminiature Connectors
Order Reference Explanation
Series Prefix Cannon designation Shell size E - 9 way A - 15 way B - 25 way C - 37 way Class N - new generation Termination / Mounting E - 90 pushfit / row spacing 2,54 F - 90 pushfit / row spacing 2,84 Number of contacts 9, 15, 25, 37 Contact gender P - pin contact S - socket contact Contact termination L - solder pin Pushfit Type 0 - no pushfit 1 - for pcb 1,6 2 - for pcb 2,4 3 - for pcb 3,2 Mounting height E - Euro 3,6 Locking 03 - M3 thread 04 - 4-40 UNC thread 13 - M3 thread with jackpost 14 - 4-40 UNC thread with jackpost Modification no code - performance class 3 A191 - performance class 2 A190 - performance class 1
Order Reference
D A N E - 15 S - L 1 - E 03 - *
Part numbers in red letter typeface indicate standard products: usually available with shorter lead times.
Cannon
3
Dimensions are shown in mm Dimensions subject to change
www.ittcannon.com
Eurostyle D Subminiature Connectors
Pin Connector 90 Part numbers Pin
Shell size DE DA DB DC Shell size DE DA DB DC Layout 9 15 25 37 Layout 9 15 25 37 Clinch nut 4-40 UNC DENE-9P-L1-E04-A191 DANE-15P-L1-E04-A191 DBNE-25P-L1-E04-A191 DCNE-37P-L1-E04-A191 Jackpost 4-40 UNC DENE-9P-L1-E14-A191 DANE-15P-L1-E14-A191 DBNE-25P-L1-E14-A191 DCNE-37P-L1-E14-A191
Pin Connector
Clinch nut M3 DENE-9P-L1-E03-A191 DANE-15P-L1-E03-A191 DBNE-25P-L1-E03-A191 DCNE-37P-L1-E03-A191 Jackpost M3 DENE-9P-L1-E13-A191 DANE-15P-L1-E13-A191 DBNE-25P-L1-E13-A191 DCNE-37P-L1-E13-A191
Part numbers in red letter typeface indicate standard products: usually available with shorter lead times. Note: For performance class 1 replace A-191 by -A190; For performance class 3 delete -A191. Example: DENE-9P-L1-E13 For row spacing 2,84 mm replace D*NE with D*NF Example: DANF-15P-L1-A191
Shell size DE DA DB DC
Contacts 9 15 25 37
A - 0,7 31,20 39,50 53,40 69,70
B + 0,25 16,79 25,12 38,84 55,30
C 0,1 25,00 33,35 47,04 63,50
D + 0,25 8,23 8,23 8,23 8,23
E - 0,7 12,90 12,90 12,90 12,90
F 2,54 or 2,84 2,54 or 2,84 2,54 or 2,84 2,54 or 2,84
pushfit
clinch nut
Jackpost
03 - M3 thread 04 - 4-40 UNC thread
13 - M3 thread 14 - 4-40 UNC thread
Cannon
4
Dimensions are shown in mm Dimensions subject to change
www.ittcannon.com
Eurostyle D Subminiature Connectors
Socket Connector 90 Part numbers Socket
Shell size DE DA DB DC Shell size DE DA DB DC Layout 9 15 25 37 Layout 9 15 25 37 Clinch nut 4-40 UNC DENE-9S-L1-E04-A191 DANE-15S-L1-E04-A191 DBNE-25S-L1-E04-A191 DCNE-37S-L1-E04-A191 Jackpost 4-40 UNC DENE-9S-L1-E14-A191 DANE-15S-L1-E14-A191 DBNE-25S-L1-E14-A191 DCNE-37S-L1-E14-A191
Socket Connector
Clinch nut M3 DENE-9S-L1-E03-A191 DANE-15S-L1-E03-A191 DBNE-25S-L1-E03-A191 DCNE-37S-L1-E03-A191 Jackpost M3 DENE-9S-L1-E13-A191 DANE-15S-L1-E13-A191 DBNE-25S-L1-E13-A191 DCNE-37S-L1-E13-A191
Part numbers in red letter typeface indicate standard products: usually available with shorter lead times. Note: For performance class 1 replace A-191 by -A190; For performance class 3 delete -A191. Example: DENE-9S-L1-E13 For row spacing 2,84 mm replace D*NE with D*NF Example: DANF-15S-L1-A191
Shell size DE DA DB DC pushfit
Contacts 9 15 25 37
A - 0,7 31,20 39,50 53,40 69,70
B - 0,25 16,46 24,79 38,50 54,96 clinch nut
C 0,1 25,00 33,35 47,04 63,50
D - 0,25 8,02 8,02 8,02 8,02
E - 0,7 12,90 12,90 12,90 12,90 Jackpost
F 2,54 or 2,84 2,54 or 2,84 2,54 or 2,84 2,54 or 2,84
03 - M3 thread 04 - 4-40 UNC thread
13 - M3 thread 14 - 4-40 UNC thread
Cannon
5
Dimensions are shown in mm Dimensions subject to change
www.ittcannon.com
Eurostyle D Subminiature Connectors
Contact Arrangements Face View Pin Insert
Standard
Pattern Hole
PC Board Hole pattern - 90 European
Shell size Contact arrangement Contact size
E 9 20
Dimension X Termination / Mounting E - 90 pushfit / row spacing 2,54, F - 90 pushfit / row spacing 2,84
Shell size Contact arrangement Contact size
A 15 20
Dimension X Termination / Mounting E - 90 pushfit / row spacing 2,54, F - 90 pushfit / row spacing 2,84
Shell size Contact arrangement Contact size
B 25 20
Dimension X Termination / Mounting E - 90 pushfit / row spacing 2,54, F - 90 pushfit / row spacing 2,84
Shell size Contact arrangement Contact size
C 37 20
Dimension X Termination / Mounting E - 90 pushfit / row spacing 2,54, F - 90 pushfit / row spacing 2,84
Signal Contact 0,60
Recommended PCB Hole 1,00
Mounting Type All
Recommended PCB Hole 3,10
Cannon
6
Dimensions are shown in mm Dimensions subject to change
www.ittcannon.com
Product Safety Information
THIS NOTE SHOULD BE READ IN CONJUNCTION WITH THE PRODUCT DATA SHEET/ CATALOGUE. FAILURE TO OBSERVE THE ADVICE IN THIS INFORMATION SHEET AND THE OPERATING CONDITIONS SPECIFIED IN THE PRODUCT DATA SHEET/CATALOGUE COULD RESULT IN HAZARDOUS SITUATIONS. 1. MATERIAL CONTENT AND PHYSICAL FORM Electrical connectors do not usually contain hazardous materials. They contain conducting and non-conducting materials and can be divided into two groups. a) Printed circuit types and low cost audio types which employ all plastic insulators and casings. b) Rugged, Fire Barrier and High Reliability types with metal casings and either natural rubber, synthetic rubber, plastic or glass insulating materials. Contact materials vary with type of connector and also application and are usually manufactured from either copper, copper alloys, nickel, alumel, chromel or steel. In special applications, other alloys may be specified. 2. FIRE CHARACTERISTICS AND ELECTRIC SHOCK HAZARD There is no fire hazard when the connector is correctly wired and used within the specified parameters. Incorrect wiring or assembly of the connector or careless use of metal tools or conductive fluids, or transit damage to any of the component parts may cause electric shock or burns. Live circuits must not be broken by separating mated connectors as this may cause arcing, ionisation and burning. Heat dissipation is greater at maximum resistance in a circuit. Hot spots may occur when resistance is raised locally by damage, e.g. cracked or deformed contacts, broken strands of wire. Local overheating may also result from the use of the incorrect application tools or from poor quality soldering or slack screw terminals. Overheating may occur if the ratings in the Product Data Sheet/ Catalogue are exceeded and can cause breakdown of insulation and hence electric shock. If heating is allowed to continue it intensifies by further increasing the local resistance through loss of temper of spring contacts, formation of oxide film on contacts and wires, and leakage currents through carbonisation of insulation and tracking paths. Fire can then result in the presence of combustible materials and this may release noxious fumes. Overheating may not be visually apparent. Burns may result from touching overheated components. 3. HANDLING Care must be taken to avoid damage to any component parts of electrical connectors during installation and use. Although there are normally no sharp edges, care must be taken when handling certain components to avoid injury to fingers. Electrical connectors may be damaged in transit to the customers, and damage may result in creation of hazards. Products should therefore be examined prior to installation/use and rejected if found to be damaged. 4. DISPOSAL Incineration of certain materials may release noxious or even toxic fumes. 5. APPLICATION Connectors with exposed contacts should not be selected for use on the current supply side of an electrical circuit, because an electric shock could result from touching exposed contacts on an unmated connector. Voltages in excess of 30 V ac or 42.5 V dc are potentially hazardous and care should be taken to ensure that such voltages can not be transmitted in any way to exposed metal parts of the connector body. The connector and wiring should be checked, before making live, to have no damage to metal parts or insulators, no solder blobs, loose strands, conducting lubricants, swarf, or any other undersired conducting particles. Circuit resistance and continuity check should be made to make certain that there are no high resistance joints or spurious conducting paths. Always use the correct application tools as specified in the Data Sheet / Catalogue. Do not permit untrained personnel to wire, assemble or tramper with connectors. For operation voltage please see appropriate national regulations. IMPORTANT GENERAL INFORMATION. 1. Air and creepage paths/Operating voltage The admissible operating voltages depend on the individual applications and the valid national and other applicable safety regulations. For this reason the air and creepage path data are only reference values. Observe reduction of air and creepage paths due to PC board and or harnessing. 2. Temperature All information given are temperature limits. The operation temperature depends on the individual application. 3. Other important information Cannon continuously endeavours to improve their products. Therefore, Cannon products may deviate from the description, technical data and shape as shown in this catalogue and data sheets.
ITT Cannon, a division of ITT Industries, Inc. manufactures the highest quality products available in the marketplace; however these products are intended to be used in accordance with the specifications in this publication. Any use or application that deviates from stated operating specifications is not recommended and may be unsafe. No information and data contained in this publication shall be construed to create any liability on the part of Cannon. Any new issue of this publication shall automatically invalidate and supersede any and all previous issues. A limited warranty applies to Cannon products. Except for obligations assumed by Cannon under this warranty, Cannon shall not be liable for any loss, damage, cost of repairs, incidental or consequential damages of any kind, whether or not based on express or implied warranty, contract, negligence or strict liability arising in connection with the design, manufacture, sale, use or repair of the products. Product availability, prices and delivery dates are exclusively subject to our respective order confirmation form; the same applies to orders based on development samples delivered. This publication is not to be construed as an offer. It is intended merely as an invitation to make an offer. By this publication, Cannon does not assume responsibility or any liability for any patent infringements or other rights of third parties which may result from its use. Reprinting this publication is generally permitted, indicating the source. However, Cannon's prior consent must be obtained in all cases. Cannon is a trademark of ITT Industries, Inc


▲Up To Search▲   

 
Price & Availability of DBNE-9P-L0-E03-A191

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X