 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Bulletin I25162 rev. D 04/03 ST230C..C SERIES PHASE CONTROL THYRISTORS Hockey Puk Version Features Center amplifying gate Metal case with ceramic insulator International standard case TO-200AB (A-PUK) 410A Typical Applications DC motor controls Controlled DC power supplies AC controllers Major Ratings and Characteristics Parameters IT(AV) @ Ths IT(RMS) @ Ths ITSM @ 50Hz @ 60Hz I2t @ 50Hz @ 60Hz V DRM/V RRM tq TJ typical case style TO-200AB (A-PUK) Units A C A C A A KA2s KA2s V s C ST230C..C 410 55 780 25 5700 5970 163 149 400 to 2000 100 - 40 to 125 www.irf.com 1 ST230C..C Series Bulletin I25162 rev. D 04/03 ELECTRICAL SPECIFICATIONS Voltage Ratings Voltage Type number Code 04 ST230C..C 08 12 14 16 18 20 V DRM/V RRM, max. repetitive peak and off-state voltage V 400 800 1200 1400 1600 1800 2000 VRSM , maximum nonrepetitive peak voltage V 500 900 1300 1500 1700 1900 2100 I DRM/I RRM max. @ TJ = TJ max mA 30 On-state Conduction Parameter I T(AV) Max. average on-state current @ Heatsink temperature I T(RMS) Max. RMS on-state current I TSM Max. peak, one-cycle non-repetitive surge current ST230C..C 410 (165) 55 (85) 780 5700 5970 4800 5000 Units Conditions A C 180 conduction, half sine wave double side (single side) cooled DC @ 25C heatsink temperature double side cooled t = 10ms A t = 8.3ms t = 10ms t = 8.3ms t = 10ms KA2s t = 8.3ms t = 10ms t = 8.3ms KA s 2 No voltage reapplied 100% VRRM reapplied No voltage reapplied 100% VRRM reapplied Sinusoidal half wave, Initial TJ = TJ max. It 2 Maximum I t for fusing 2 163 148 115 105 I t 2 Maximum I t for fusing 2 1630 0.92 t = 0.1 to 10ms, no voltage reapplied (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. V T(TO)1 Low level value of threshold voltage V T(TO)2 High level value of threshold voltage r t1 r t2 V TM IH IL Low level value of on-state slope resistance High level value of on-state slope resistance Max. on-state voltage Maximum holding current Max. (typical) latching current V 0.98 (I > x IT(AV)),TJ = TJ max. (16.7% x x IT(AV) < I < x IT(AV)), TJ = TJ max. m 0.81 1.69 600 mA 1000 (300) T J = 25C, anode supply 12V resistive load V (I > x IT(AV)),TJ = TJ max. Ipk= 880A, TJ = TJ max, tp = 10ms sine pulse 0.88 Switching Parameter di/dt Max. non-repetitive rate of rise of turned-on current td tq Typical delay time Typical turn-off time ST230C..C 1000 1.0 Units Conditions A/s TJ = TJ max, anode voltage 80% VDRM Gate current 1A, di g/dt = 1A/s s Vd = 0.67% VDRM, TJ = 25C ITM = 300A, TJ = TJ max, di/dt = 20A/s, VR = 50V dv/dt = 20V/s, Gate 0V 100, tp = 500s Gate drive 20V, 20, tr 1s 100 2 www.irf.com ST230C..C Series Bulletin I25162 rev. D 04/03 Blocking Parameter dv/dt IDRM IRRM Maximum critical rate of rise of off-state voltage Max. peak reverse and off-state leakage current ST230C..C 500 30 Units Conditions V/s mA TJ = TJ max. linear to 80% rated VDRM TJ = TJ max, rated V DRM /V RRM applied Triggering Parameter PGM Maximum peak gate power ST230C..C 10.0 2.0 3.0 20 Units Conditions W A TJ = TJ max, t p 5ms TJ = TJ max, f = 50Hz, d% = 50 TJ = TJ max, t p 5ms PG(AV) Maximum average gate power IGM +VGM -VGM Max. peak positive gate current Maximum peak positive gate voltage Maximum peak negative gate voltage TYP. 180 IGT DC gate current required to trigger 90 40 2.9 VGT DC gate voltage required to trigger IGD VGD DC gate current not to trigger DC gate voltage not to trigger 1.8 1.2 V 5.0 MAX. 150 3.0 10 0.25 mA V V mA TJ = TJ max, tp 5ms TJ = - 40C TJ = 25C TJ = 125C TJ = - 40C TJ = 25C TJ = 125C Max. gate current/voltage not to trigger is the max. value which will not trigger any unit with rated VDRM anode-to-cathode applied Max. required gate trigger/ current/ voltage are the lowest value which will trigger all units 12V anode-to-cathode applied TJ = TJ max Thermal and Mechanical Specification Parameter TJ Tstg Max. operating temperature range Max. storage temperature range ST230C..C -40 to 125 -40 to 150 0.17 0.08 0.033 0.017 4900 (500) Units Conditions C DC operation single side cooled K/W DC operation double side cooled DC operation single side cooled DC operation double side cooled RthJ-hs Max. thermal resistance, junction to heatsink RthC-hs Max. thermal resistance, case to heatsink F Mounting force, 10% K/W N (Kg) g wt Approximate weight Case style 50 TO - 200AB (A-PUK) See Outline Table www.irf.com 3 ST230C..C Series Bulletin I25162 rev. D 04/03 RthJ-hs Conduction (The following table shows the increment of thermal resistence RthJ-hs when devices operate at different conduction angles than DC) Conduction angle 180 120 90 60 30 Sinusoidal conduction Rectangular conduction Single Side Double Side 0.015 0.018 0.024 0.035 0.060 0.017 0.019 0.024 0.035 0.060 Single Side Double Side 0.011 0.019 0.026 0.036 0.060 0.011 0.019 0.026 0.037 0.061 Units Conditions TJ = TJ max. K/W Ordering Information Table Device Code ST 1 23 2 0 3 C 4 20 5 C 6 1 7 8 1 2 3 4 5 6 7 - Thyristor Essential part number 0 = Converter grade C = Ceramic Puk Voltage code: Code x 100 = VRRM (See Voltage Rating Table) C = Puk Case TO-200AB (A-PUK) 0 = Eyelet terminals (Gate and Auxiliary Cathode Unsoldered Leads) 1 = Fast-on terminals (Gate and Auxiliary Cathode Unsoldered Leads) 2 = Eyelet terminals (Gate and Auxiliary Cathode Soldered Leads) 3 = Fast-on terminals (Gate and Auxiliary Cathode Soldered Leads) 8 - Critical dv/dt: None = 500V/sec (Standard selection) L = 1000V/sec (Special selection) 4 www.irf.com ST230C..C Series Bulletin I25162 rev. D 04/03 Outline Table ANODE TO GATE CREEPAGE DISTANCE: 7.62 (0.30) MIN. STRIKE DISTANCE: 7.12 (0.28) MIN. 19 (0.75) DIA. MAX. 0.3 (0.01) MIN. 13.7 / 14.4 (0.54 / 0.57) 0.3 (0.01) MIN. 19 (0.75) DIA. MAX. 38 (1.50) DIA MAX. GATE TERM. FOR 1.47 (0.06) DIA. PIN RECEPTACLE Case Style TO-200AB (A-PUK) All dimensions in millimeters (inches) Quote between upper and lower pole pieces has to be considered after application of Mounting Force (see Thermal and Mechanical Specification) 2 HOLES 3.56 (0.14) x 1.83 (0.07) MIN. DEEP 6.5 (0.26) 4.75 (0.19) 25 5 42 (1.65) MAX. 28 (1.10) Maximum Allowable Heatsink Temperature (C) Maximum Allowable Heatsink Temperature (C) 30 20 10 00 90 80 70 60 50 40 0 30 ST230C..C Series (Single Side Cooled) R thJ-hs (DC) = 0.17 K/W 30 20 10 00 90 80 70 60 50 40 30 20 0 100 30 ST230C..C Series (Single Side Cooled) R thJ-hs (DC) = 0.17 K/W Conduction Angle Conduction Period 60 90 120 180 60 90 120 180 DC 40 80 120 160 200 240 280 320 Average On-state Current (A) Fig. 1 - Current Ratings Characteristics 200 300 400 500 Average On-state Current (A) Fig. 2 - Current Ratings Characteristics www.irf.com 5 ST230C..C Series Bulletin I25162 rev. D 04/03 Maximum Allowable Heatsink Temperature (C) Maximum Allowable Heatsink Temperature (C) 30 20 10 00 90 80 70 60 50 40 30 20 0 100 30 ST230C..C Series (Double Side Cooled) R thJ-hs (DC) = 0.08 K/W 30 20 10 00 90 80 70 60 50 40 30 20 30 ST230C..C Series (Double Side Cooled) R thJ-hs (DC) = 0.08 K/W Conduction Angle Conduction Period 60 90 120 180 60 90 120 180 DC 200 300 400 500 600 0 100 200 300 400 500 600 700 800 Average On-state Current (A) Fig. 4 - Current Ratings Characteristics Average On-state Current (A) Fig. 3 - Current Ratings Characteristics Maximum Allowable Heatsink Temperature (C) Maximum Allowable Heatsink Temperature (C) 100 000 900 800 700 600 500 400 300 200 100 0 0 1400 1200 1000 800 600 180 120 90 60 30 RMS Limit DC 180 120 90 60 30 RMS Limit Conduction Period Conduction Angle 400 200 0 0 200 400 600 800 1000 Average On-state Current (A) Fig. 6- On-state Power Loss Characteristics ST230C..C Series T J = 125C ST230C..C Series T J = 125C 100 200 300 400 500 600 Average On-state Current (A) Fig. 5- On-state Power Loss Characteristics Peak Half Sine Wave On-state Current (A) 5500 5000 4500 4000 3500 3000 2500 2000 1 Peak Half Sine Wave On-state Current (A) At Any Rated Load Condition And With Rated Vrrm Applied Following Surge. Initial Tj = 125C @ 60 Hz 0.0083 s @ 50 Hz 0.0100 s 500 000 500 000 500 000 500 000 500 Maximum Non Repetitive Surge Current Versus Pulse Train Duration. Control Of Conduction May Not Be Maintained. Initial Tj = 125C No Voltage Reapplied Rated Vrrm Reapplied ST230C..C Series ST230C..C Series 10 100 000 0.01 0.1 Pulse Train Duration (s) 1 Number Of Equal Amplitude Half Cycle Current Pulses (N) Fig. 7 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled Fig. 8 - Maximum Non-Repetitive Surge Current Single and Double Side Cooled 6 www.irf.com ST230C..C Series Bulletin I25162 rev. D 04/03 10000 Instantaneous On-state Current (A) Tj = 25C Tj = 125C 1000 ST230C..C Series 100 0.5 1 1.5 2 2.5 3 3.5 4 4.5 Instantaneous On-state Voltage (V) Fig. 9 - On-state Voltage Drop Characteristics Transient Thermal Impedance Z thJ-hs (K/W) 1 Steady State Value R thJ-hs = 0.17 K/W (Single Side Cooled) 0.1 R thJ-hs = 0.08 K/W (Double Side Cooled) (DC Operation) 0.01 ST230C..C Series .001 0.001 0.01 0.1 Square Wave Pulse Duration (s) 1 10 Fig. 10 - Thermal Impedance ZthJ-hs Characteristics 100 Instantaneous Gate Voltage (V) 10 Rectangular gate pulse a) Recommended load line for rated di/dt : 20V, 10ohms; tr<=1 s b) Recommended load line for <=30% rated di/dt : 10V, 10ohms tr<=1 s (1) PGM = 10W, (2) PGM = 20W, (3) PGM = 40W, (4) PGM = 60W, tp = 4ms tp = 2ms tp = 1ms tp = 0.66ms (a) (b) Tj=-40 C Tj=25 C Tj=125 C 1 VGD IGD 0.1 0.001 0.01 (1) (2) (3) (4) Device: ST230C..C Series Frequency Limited by PG(AV) 0.1 1 10 100 Instantaneous Gate Current (A) Fig. 11 - Gate Characteristics www.irf.com 7 ST230C..C Series Bulletin I25162 rev. D 04/03 Data and specifications subject to change without notice. This product has been designed and qualified for Industrial Level. Qualification Standards can be found on IR's Web site. IR WORLD HEADQUARTERS: 233 Kansas St., El Segundo, California 90245, USA Tel: (310) 252-7105 TAC Fax: (310) 252-7309 Visit us at www.irf.com for sales contact information. 04 /03 8 www.irf.com |
Price & Availability of ST230C14C0
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |