 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MCR72/D Silicon Controlled Rectifiers Reverse Blocking Triode Thyristors . . . designed for industrial and consumer applications such as temperature, light and speed control; process and remote controls; warning systems; capacitive discharge circuits and MPU interface. * Center Gate Geometry for Uniform Current Density * All Diffused and Glass-Passivated Junctions for Parameter Uniformity and Stability * Small, Rugged Thermowatt Construction for Low Thermal Resistance, High Heat Dissipation and Durability * Low Trigger Currents, 200 A Maximum for Direct Driving from Integrated Circuits MCR72 Series SCRs 8 AMPERES RMS 50 thru 800 VOLTS A G C CASE 221A-04 (TO-220AB) STYLE 3 MAXIMUM RATINGS (TJ = 25C unless otherwise noted.) Rating Peak Repetitive Forward and Reverse Blocking Voltage(1) (TJ = - 40 to 110C, 1/2 Sine Wave, RGK = 1k) MCR72-2 MCR72-3 MCR72-4 MCR72-6 MCR72-8 MCR72-10 On-State RMS Current (TC = 83C) Peak Non-repetitive Surge Current (1/2 Cycle, 60 Hz, TJ = -40 to 110C) Circuit Fusing (t = 8.3 ms) Peak Gate Voltage (t IT(RMS) ITSM I2t VGM IGM PGM PG(AV) TJ Symbol VDRM or VRRM 50 100 200 400 600 800 8 100 40 5 1 5 0.75 -40 to +110 Amps Amps A2s Volts Amp Watts Watts C (cont.) Value Unit Volts p 10 s) p 10 s) Peak Gate Power (t p 10 s) Peak Gate Current (t Average Gate Power Operating Junction Temperature Range 1. VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; however, positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. Motorola Thyristor Device Data (c) Motorola, Inc. 1995 1 MCR72 Series MAXIMUM RATINGS -- continued Rating Storage Temperature Range Mounting Torque Symbol Tstg -- Value -40 to + 150 8 Unit C in. lb. THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient Symbol RJC RJA Max 2.2 60 Unit C/W C/W ELECTRICAL CHARACTERISTICS (TC = 25C, RGK = 1 k unless otherwise noted.) Characteristic Peak Forward or Reverse Blocking Current(1) (VAK = Rated VDRM or VRRM) TJ = 25C TJ = 110C On-State Voltage (ITM = 16 A Peak, Pulse Width Symbol IDRM, IRRM -- -- VTM IGT VGT -- 0.1 IH dv/dt tgt -- -- -- 0.5 -- -- 10 1 1.5 -- 6 -- -- mA V/s s -- -- -- -- 1.7 30 10 500 2 200 Min Typ Max Unit A A Volts A Volts p 1 ms, Duty Cycle p 2%) Gate Trigger Current (Continuous dc)(2) (VD = 12 V, RL = 100 ) Gate Trigger Voltage (Continuous dc) (VD = 12 V, RL = 100 ) (VD = Rated VDRM, RL = 10 k, TJ = 110C) Holding Current (VD = 12 V, ITM = 100 mA) Critical Rate-of-Rise of Forward Blocking Voltage (VD = Rated VDRM, TJ = 110C, Exponential Waveform) Gate Controlled Turn-On Time (VD = Rated VDRM, ITM = 16 A, IG = 2 mA) 1. Ratings apply for negative gate voltage or RGK = 1 k. Devices shall not have a positive gate voltage concurrently with a negative voltage on the anode. Devices should not be tested with a constant current source for forward and reverse blocking capability such that the voltage applied exceeds the rated blocking voltage. 2. Does not include RGK current. FIGURE 1 - AVERAGE CURRENT DERATING TC , MAXIMUM CASE TEMPERATURE ( C) 110 PAV , AVERAGE POWER DISSIPATION (WATTS) 16 FIGURE 2 - ON-STATE POWER DISSIPATION dc 12 100 180 90 90 = 30 60 90 = Conduction Angle = Conduction Angle 8.0 = 30 60 80 180 dc 4.0 70 0 2.0 4.0 6.0 8.0 IT(AV), AVERAGE ON-STATE CURRENT (AMP) 0 0 2.0 4.0 6.0 8.0 IT(AV), AVERAGE ON-STATE CURRENT (AMP) 2 Motorola Thyristor Device Data MCR72 Series FIGURE 3 - NORMALIZED GATE CURRENT 3.0 VGT , GATE TRIGGER VOLTAGE (VOLTS) NORMALIZED GATE CURRENT 0.7 0.6 0.5 0.4 0.3 0.2 0.1 -60 -40 -20 0 20 40 60 80 100 120 VD = 12 Vdc 2.0 VD = 12 Vdc FIGURE 4 - GATE VOLTAGE 1.0 0.5 0.3 -40 -20 0 20 40 60 80 90 100 120 140 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Motorola Thyristor Device Data 3 MCR72 Series PACKAGE DIMENSIONS -T- B F C SEATING PLANE T S NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. DIM A B C D F G H J K L N Q R S T U V Z INCHES MIN MAX 0.570 0.620 0.380 0.405 0.160 0.190 0.025 0.035 0.142 0.147 0.095 0.105 0.110 0.155 0.014 0.022 0.500 0.562 0.045 0.055 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 --- --- 0.080 MILLIMETERS MIN MAX 14.48 15.75 9.66 10.28 4.07 4.82 0.64 0.88 3.61 3.73 2.42 2.66 2.80 3.93 0.36 0.55 12.70 14.27 1.15 1.39 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 --- --- 2.04 4 Q 123 A U K H Z L V G D N J R STYLE 3: PIN 1. 2. 3. 4. CATHODE ANODE GATE ANODE CASE 221A-04 (TO-220AB) Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters can and do vary in different applications. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Literature Distribution Centers: USA: Motorola Literature Distribution; P.O. Box 20912; Phoenix, Arizona 85036. EUROPE: Motorola Ltd.; European Literature Centre; 88 Tanners Drive, Blakelands, Milton Keynes, MK14 5BP, England. JAPAN: Nippon Motorola Ltd.; 4-32-1, Nishi-Gotanda, Shinagawa-ku, Tokyo 141, Japan. ASIA PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Center, No. 2 Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. 4 *MCR72/D* Motorola Thyristor Device Data MCR72/D |
Price & Availability of MCR72
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |