![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
VISHAY H11A1/ H11A2/ H11A3/ H11A4/ H11A5 Vishay Semiconductors Optocoupler, Phototransistor Output, With Base Connection Features * * * * Interfaces with common logic families Input-output coupling capacitance < 0.5 pF Industry Standard Dual-in line 6-pin package 5300 VRMS isolation test voltage A C NC 1 2 3 6B 5C 4E Agency Approvals * UL File #E52744 System Code H or J * CSA 93751 * BSI IEC60950 IEC60965 * DIN EN 60747-5-2(VDE0884) DIN EN 60747-5-5 pending Available with Option 1 * FIMKO i179004 Applications AC mains detection Reed relay driving Switch mode power supply feedback Telephone ring detection Logic ground isolation Logic coupling with high frequency noise rejection These isolation processes and the Vishay ISO9001 quality program results in the highest isolation performance available for a commercial plastic phototransistor optocoupler. The devices are available in lead formed configuration suitable for surface mounting and are available either on tape and reel, or in standard tube shipping containers. Footnotes Designing with data sheet is covered in Application Note 45. Order Information Part H11A1 H11A2 H11A3 H11A4 H11A5 H11A1-X006 H11A1-X007 H11A1-X009 Remarks CTR > 50 %, DIP-6 CTR > 20 %, DIP-6 CTR > 20 %, DIP-6 CTR > 10 %, DIP-6 CTR > 30 %, DIP-6 CTR > 50 %, DIP-6 400 mil (option 6) CTR > 50 %, SMD-6 (option 7) CTR > 50 %, SMD-6 (option 9) Description The H11Ax family is an Industry Standard Single Channel Phototransistor Coupler. It includes the H11A1/ H11A2/ H11A3/ H11A4/ H11A5 couplers. Each optocoupler consists of gallium arsenide infrared LED and a silicon NPN phototransistor. The isolation performance is accomplished through Vishay double molding isolation manufacturing process. Compliance to DIN EN 60747-5-2(VDE0884)/ DIN EN 60747-5-5 pending partial discharge isolation specification is available is by ordering option 1. For additional information on the available options refer to Option Information. Document Number 83730 Rev. 1.3, 16-Apr-04 www.vishay.com 1 H11A1/ H11A2/ H11A3/ H11A4/ H11A5 Vishay Semiconductors Absolute Maximum Ratings VISHAY Tamb = 25 C, unless otherwise specified Stresses in excess of the absolute Maximum Ratings can cause permanent damage to the device. Functional operation of the device is not implied at these or any other conditions in excess of those given in the operational sections of this document. Exposure to absolute Maximum Rating for extended periods of the time can adversely affect reliability. Input Parameter Reverse voltage Forward current Surge current Power dissipation t 10 s Test condition Symbol VR IF IFSM Pdiss Value 6.0 60 2.5 100 Unit V mA A mW Output Parameter Collector-emitter breakdown voltage Emitter-base breakdown voltage Collector current (t < 1.0 ms) Power dissipation Test condition Symbol VCEO VEBO IC IC Pdiss Value 70 7.0 50 100 150 Unit V V mA mA mW Coupler Parameter Isolation test voltage Creepage Clearance Isolation thickness between emitter and detector Comparative tracking index per DIN IEC 112/VDE0303,part 1 Isolation resistance VIO = 500 V, Tamb = 25 C VIO = 500 V, Tamb = 100 C Storage temperature Operating temperature Junction temperature Soldering temperature max. 10 s dip soldering: distance to seating plane 1.5 mm RIO RIO Tamb Tstg Tj Tsld Test condition Symbol VISO Value 5300 7.0 7.0 0.4 175 1012 1011 - 55 to + 150 - 55 to + 100 100 260 C C C C Unit VRMS mm mm mm www.vishay.com 2 Document Number 83730 Rev. 1.3, 16-Apr-04 VISHAY H11A1/ H11A2/ H11A3/ H11A4/ H11A5 Vishay Semiconductors Electrical Characteristics Tamb = 25 C, unless otherwise specified Minimum and maximum values are testing requirements. Typical values are characteristics of the device and are the result of engineering evaluation. Typical values are for information only and are not part of the testing requirements. Input Parameter Forward voltage Test condition IF = 10 mA Part H11A1 H11A2 H11A3 H11A4 H11A5 Reverse current Capacitance VR = 3.0 V VR = 0, f = 1.0 MHz Symbol VF VF VF VF VF IR CO 50 Min Typ. 1.1 1.1 1.1 1.1 1.1 Max 1.5 1.5 1.5 1.5 1.7 10 Unit V V V V V A pF Output Parameter Collector-emitter breakdown voltage Emitter-collector breakdown voltage Collector-base breakdown voltage Collector-emitter leakage current Collector-emitter capacitance Test condition IC = 1.0 mA, IF = 0 mA IE = 100 A, IF = 0 mA IC = 10 A, IF = 0 mA VCE = 10 V, IF = 0 mA VCE = 0 Symbol BVCEO BVECO BVCBO ICEO CCE Min 30 7.0 70 5.0 6.0 50 Typ. Max Unit V V V nA pF Coupler Parameter Saturation voltage, collectoremitter Capacitance (input-output) Test condition ICE = 0.5 mA, IF = 10 mA Symbol VCEsat CIO 0.5 Min Typ. Max 0.4 Unit V pF Current Transfer Ratio Parameter DC Current Transfer Ratio Test condition VCE = 10 V, IF = 10 mA Part H11A1 H11A2 H11A3 H11A4 H11A5 Symbol CTRDC CTRDC CTRDC CTRDC CTRDC Min 50 20 20 10 30 Typ. Max Unit % % % % % Document Number 83730 Rev. 1.3, 16-Apr-04 www.vishay.com 3 H11A1/ H11A2/ H11A3/ H11A4/ H11A5 Vishay Semiconductors Switching Characteristics Parameter Switching time Test condition IC = 2 mA, RL = 100 , VCE = 10 V Symbol ton, toff Min Typ. 3.0 Max VISHAY Unit s Typical Characteristics (Tamb = 25 C unless otherwise specified) 1.4 VF - Forward Voltage - V 1.5 TA = -55C TA = 25C NCTR - Normalized CTR 1.3 1.2 1.1 1.0 0.9 0.8 0.7 .1 i4n25_01 Normalized to: Vce=10 V, IF=10 mA, TA=25C CTRce(sat) Vce=0.4 V 1.0 TA=50C 0.5 NCTR(SAT) NCTR TA = 85C 0.0 1 10 IF - Forward Current - mA 100 i4n25_03 .1 1 10 IF- LED Current - mA 100 Fig. 1 Forward Voltage vs. Forward Current Fig. 3 Normalized Non-saturated and Saturated CTR vs. LED Current 1.5 NCTR - Normlized CTR NCTR - Normalized CTR Normalized to: Vce=10 V, IF=10 mA, TA=25C CTRce(sat) Vce=0.4 V 1.5 Normalized to: Vce=10 V, IF=10 mA, TA=25C CTRce(sat) Vce=0.4 V 1.0 TA=25C 1.0 TA=70C 0.5 NCTR(SAT) NCTR 0.5 NCTR(SAT) NCTR 0.0 0 i4n25_02 0.0 .1 100 i4n25_04 1 10 IF - LED Current - mA 1 10 IF - LED Current - mA 100 Fig. 2 Normalized Non-Saturated and Saturated CTR vs. LED Current Fig. 4 Normalized Non-saturated and saturated CTR vs. LED Current www.vishay.com 4 Document Number 83730 Rev. 1.3, 16-Apr-04 VISHAY H11A1/ H11A2/ H11A3/ H11A4/ H11A5 Vishay Semiconductors 1.5 NCTR - Normalized CTR NCTRcb - Normalized CTRcb Normalized to: Vce=10 V, IF=10 mA, TA=25C CTRce(sat) Vce = 0.4 V 1.5 Normalized to: Vcb=9.3 V, IF=10 mA, TA=25C 1.0 TA=85C 1.0 0.5 NCTR(SAT) NCTR 0.5 25C 50C 70C 0.0 .1 1 10 100 0.0 .1 1 10 IF - LED Current - mA 100 IF - LED Current - mA i4n25_08 i4n25_05 Fig. 5 Normalized Non-saturated and saturated CTR vs. LED Current Fig. 8 Normalized CTRcb vs. LED Current and Temp. 35 Ice - Collector Current - mA 10 Normalized to: IF=10 mA, TA=25C 30 25 20 15 10 5 0 0 10 20 30 40 50 60 IF - LED Current - mA 70C 25C 85C 50C Normalized Photocurrent 1 1 0. Nib, TA=-20C Nib, TA= 25C Nib, TA= 50C Nib, TA= 70C 0.01 .1 i4n25_09 1 10 100 i4n25_06 IF - LED Current - mA Fig. 6 Collector-Emitter Current vs. Temperature and LED Current Fig. 9 Normalized Photocurrent vs. IF and Temp. 10 Iceo - Collector-Emitter - nA 5 4 1.2 NHFE - Normalized HFE 70C 10 10 3 1.0 -20C 0.8 25C 10 2 10 10 1 0 Vce = 10 V Typical 0.6 Normalized to: Ib=20 A, Vce=10 V, TA=25C 10 -1 10 -2 -20 0 20 40 60 80 100 0.4 i4n25_10 1 TA - Ambient Temperature - C i4n25_07 10 100 Ib - Base Current - A 1000 Fig. 7 Collector-Emitter Leakage Current vs.Temp. Fig. 10 Normalized Non-saturated HFE vs. Base Current and Temperature Document Number 83730 Rev. 1.3, 16-Apr-04 www.vishay.com 5 H11A1/ H11A2/ H11A3/ H11A4/ H11A5 Vishay Semiconductors VISHAY NHFE(sat) - Normalized Saturated HFE 1.5 Normalized to: Vce=10 V, Ib=20 A T A =25C F=10 KHz, DF=50% VCC = 5.0 V RL VO IF=1 0 mA 70C 1.0 25C -20C 0.5 50C Vce=0.4 V 0.0 1 10 100 1000 i4n25_14 i4n25_11 Ib - Base Current - A Fig. 11 Normalized HFE vs. Base Current and Temp. Fig. 14 Switching Schematic 1000 tPLH - Propagation Delay - s 2.5 tPHL - Propagation Delay - s IF =10 mA,TA=25C VCC =5.0 V, Vth=1.5 V 100 tPHL 2.0 10 tPLH 1.5 1 .1 i4n25_12 1.0 1 10 100 RL - Collector Load Resistor - k Fig. 12 Propagation Delay vs. Collector Load Resistor IF VO tD tR tPLH VTH=1.5 V tPHL tS tF i4n25_13 Fig. 13 Switching Timing www.vishay.com 6 Document Number 83730 Rev. 1.3, 16-Apr-04 VISHAY H11A1/ H11A2/ H11A3/ H11A4/ H11A5 Vishay Semiconductors Package Dimensions in Inches (mm) pin one ID 3 .248 (6.30) .256 (6.50) 4 2 1 5 6 ISO Method A .335 (8.50) .343 (8.70) .039 (1.00) Min. 4 typ. .018 (0.45) .022 (0.55) i178004 .048 (0.45) .022 (0.55) .130 (3.30) .150 (3.81) .300 (7.62) typ. 18 .031 (0.80) min. .031 (0.80) .035 (0.90) .100 (2.54) typ. 3-9 .010 (.25) typ. .300-.347 (7.62-8.81) .114 (2.90) .130 (3.0) Option 6 .407 (10.36) .391 (9.96) .307 (7.8) .291 (7.4) .028 (0.7) MIN. Option 7 .300 (7.62) TYP . Option 9 .375 (9.53) .395 (10.03) .300 (7.62) ref. .180 (4.6) .160 (4.1) .0040 (.102) .315 (8.0) MIN. .014 (0.35) .010 (0.25) .400 (10.16) .430 (10.92) .331 (8.4) MIN. .406 (10.3) MAX. .0098 (.249) .020 (.51) .040 (1.02) .012 (.30) typ. .315 (8.00) min. 15 max. 18450 Document Number 83730 Rev. 1.3, 16-Apr-04 www.vishay.com 7 H11A1/ H11A2/ H11A3/ H11A4/ H11A5 Vishay Semiconductors Ozone Depleting Substances Policy Statement It is the policy of Vishay Semiconductor GmbH to 1. Meet all present and future national and international statutory requirements. VISHAY 2. Regularly and continuously improve the performance of our products, processes, distribution and operatingsystems with respect to their impact on the health and safety of our employees and the public, as well as their impact on the environment. It is particular concern to control or eliminate releases of those substances into the atmosphere which are known as ozone depleting substances (ODSs). The Montreal Protocol (1987) and its London Amendments (1990) intend to severely restrict the use of ODSs and forbid their use within the next ten years. Various national and international initiatives are pressing for an earlier ban on these substances. Vishay Semiconductor GmbH has been able to use its policy of continuous improvements to eliminate the use of ODSs listed in the following documents. 1. Annex A, B and list of transitional substances of the Montreal Protocol and the London Amendments respectively 2. Class I and II ozone depleting substances in the Clean Air Act Amendments of 1990 by the Environmental Protection Agency (EPA) in the USA 3. Council Decision 88/540/EEC and 91/690/EEC Annex A, B and C (transitional substances) respectively. Vishay Semiconductor GmbH can certify that our semiconductors are not manufactured with ozone depleting substances and do not contain such substances. We reserve the right to make changes to improve technical design and may do so without further notice. Parameters can vary in different applications. All operating parameters must be validated for each customer application by the customer. Should the buyer use Vishay Semiconductors products for any unintended or unauthorized application, the buyer shall indemnify Vishay Semiconductors against all claims, costs, damages, and expenses, arising out of, directly or indirectly, any claim of personal damage, injury or death associated with such unintended or unauthorized use. Vishay Semiconductor GmbH, P.O.B. 3535, D-74025 Heilbronn, Germany Telephone: 49 (0)7131 67 2831, Fax number: 49 (0)7131 67 2423 www.vishay.com 8 Document Number 83730 Rev. 1.3, 16-Apr-04 This datasheet has been download from: www..com Datasheets for electronics components. |
Price & Availability of H11A1
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |