View G3NE-220T-US_906572.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Solid-state Relay
G3NE
Compact, Low-cost, SSR Switching 5 to 20 A
* Wide load voltage range: 75 to 264 VAC. Both 100-V and 200V loads can be handled with the same model. * Dedicated, compact aluminum PCB and power elements used. * Built-in varistor effectively absorbs external surges. * Quick-connect #110 input terminals and #250 output connections. * UL, CSA, and IEC/EN (TUV) approval obtained for "-US" models.
Ordering Information
I List of Models
Isolation Phototriac Yes Zero cross function No Indicator Rated output load 5 A at 100 to 240 VAC 10 A at 100 to 240 VAC 20 A at 100 to 240 VAC No 5 A at 100 to 240 VAC 10 A at 100 to 240 VAC 20 A at 100 to 240 VAC Rated input voltage 5, 12, 24 VDC Model G3NE-205T G3NE-205T-US G3NE-205T-2-US G3NE-210T G3NE-210T-US G3NE-210T-2-US G3NE-220T G3NE-220T-US G3NE-220T-2-US G3NE-205TL G3NE-205TL-US G3NE-205TL-2-US G3NE-210TL G3NE-210TL-US G3NE-210TL-2-US G3NE-220TL G3NE-220TL-US G3NE-220TL-2-US
Note: When ordering, specify the input voltage.
I Accessories (Order Separately)
Heat Sinks
Model Y92B-N50 Y92B-N100 Applicable SSR G3NE-205T(L)(-2)(-US)/-210T(L)(-2)(-US) G3NE-220T(L)(-2)(-US) SSR Input impedance With zero cross function Without zero cross function 250 20% 600 20% 1.6 k20% 300 20% 800 20% Must release 1 VDC min. The following heat sinks are thin and can be DIN-track mounted. See Dimensions for details.
Specifications
I Ratings
Input
Rated voltage 5 VDC 12 VDC 24 VDC Operating voltage 4 to 6 VDC 9.6 to 14.4 VDC 19.2 to 28.8 VDC 4 VDC max. 9.6 VDC max. 19.2 VDC max. Voltage level Must operate
Note: Each model has 5-VDC, 12-VDC, and 24-VDC input versions.
Solid-state Relay
G3NE
J-17
Output
Model Rated load voltage Load voltage range Applicable load Load current (See note 1.) With heat sink G3NE-205T(L)-(-2)(US) G3NE-210T(L)-(-2)(US) G3NE-220T(L)-(-2)(US) 100 to 240 VAC 75 to 264 VAC 0.1 to 5 A 0.1 to 10 A (See note 2.) 0.1 to 20 A (See note 2.) Without heat sink 0.1 to 5 A 0.1 to 5 A 0.1 to 5 A 60 A (60 Hz, 1 cycle) 150 A (60 Hz, 1 cycle) 220 A (60 Hz, 1 cycle) Inrush current
Note: 1. The load current varies depending on the ambient temperature. Refer to Load Current vs. Ambient Temperature under Engineering Data for details. 2. These values apply when using a dedicated radiator or a radiation plate of specified size.
I Characteristics
Item Operate time Release time Output ON voltage drop Leakage current Insulation resistance Dielectric strength Vibration resistance Shock resistance Ambient temperature Ambient humidity Approved standards (only for -US models) Weight G3NE-2@@T-(-2)(US) 1/2 of load power source cycle + 1 ms max. 1/2 of load power source cycle + 1 ms max. 1.6 V (RMS) max. 2 mA max. (at 100 VAC) 5 mA max. (at 200 VAC) 100 M min. (at 500 VDC) 2,000 VAC, 50/60 Hz for 1 min Destruction: 10 to 55 to 10 Hz, 0.75-mm single amplitude (1.5-mm double amplitude) Destruction: 1,000 m/s2 Operating: -30C to 80C (with no icing or condensation) Storage: -30C to 100C (with no icing or condensation) Operating: 45% to 85% UL508 File No.E64562/CSA C22.2 (No.0, No.14) File No. LR35535 TUV R9051064 (VDE0435) (EN60950) Approx. 37 g 1 ms max. G3NE-2@@TL-(-2)(US)
Engineering Data
Load Current vs. Ambient Temperature
G3NE-205T(L)-(-2)(US)
Without heat sink
G3NE-210T(L)-(-2)(US)
With standard heat sink (Y92B-N50) or aluminum plate measuring 100 mm x 100 mm x t2 mm (W x H x D)
G3NE-220T(L)-(-2)(US)
With standard heat sink (Y92B-N100) or aluminum plate measuring 300 mm x 300 mm x t3 mm (W x H x D)
Load current (A)
Load current (A)
Without heat sink
Load current (A)
Without heat sink
Ambient temperature (C)
Ambient temperature (C)
Ambient temperature (C)
J-18
Solid-state Relay G3NE
Inrush Current Resistivity: Non-repetitive
Note: Keep the inrush current to half the rated value if it occurs repetitively.
G3NE-205T(L)-(-2)(US)
Inrush current (A. Peak) Inrush current (A. Peak)
G3NE-210T(L)-(-2)(US)
Inrush current (A. Peak) Energizing time (ms)
G3NE-220T(L)-(-2)(US)
Energizing time (ms)
Energizing time (ms)
Dimensions
Note: All units are in millimeters unless otherwise indicated.
G3NE-205T(L)/210T(L)/220T(L)-(-2)(US)
3.5 dia. hole 47.5 max.
Terminal Arrangement/ Internal Connections (Top View)
3+ Input voltage
Input Output
37.5 max.
14.5
1
Load
30+0.5 Two #250 (t = 0.8) (Faston tab or equivalent) 7.95 3 11.5 max.
Two #110 (t = 0.5) (Faston tab or equivalent)* 7.1 2.9 6
6.5
4-
2
Load power supply
Mounting Holes
* G3NE-2@@T(L)-2-US: Two, #187 (t=0.5) (Faston tab or equivalent)
Two, 3.5-dia. or M3 holes 300.2
Heat Sink Y92B-N50
Mounting Holes
4.6 dia. hole Two, M3 holes Two, M4 holes Two, 3.2-dia. holes 44 max. 30 47 max. Two, 4.4-dia. or M4 holes
35 30.50.3
900.4
47.6 77 max. 900.3 100 max.
5.6
5
6 51 max.
4.5
Weight: approx. 200 g
350.2 Two, M4 holes Two, 3.2-dia. holes
Y92B-N100
4.6 dia. hole
Two, M3 holes
Mounting Holes
35 30.50.3
71 max. 30
75 max. 900.4
47.6 77 max. 900.3 100 max.
5.6 28
5 100 max.
13
4.5
Two, 4.4-dia. or M4 holes
350.2
Weight: approx. 400 g
Solid-state Relay
G3NE
J-19
SSR
Precautions
Refer to the Technical Information for SSRs (Cat. No. J137) for general precautions.
I Correct Use
Do not apply excessive force to the terminals. Exercise care when pulling or inserting the terminal clips for the Quick Connector (QC). When attaching a heat sink to the G3NE, in order to facilitate heat dissipation, apply heat conductive grease on the heat sink. Tighten the mounting screws of the heat sink with a torque of 0.59 to 0.98 N*m.
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS. To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527. Cat. No. K062-E1-03 In the interest of product improvement, specifications are subject to change without notice.
J-20
Solid-state Relay G3NE

▲Up To Search▲

Price & Availability of G3NE-220T-US

	To Download G3NE-220T-US Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .