 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| Power Transistors 2SB0950, 2SB0950A (2SB950, 2SB950A) Silicon PNP epitaxial planar type Darlington 0.70.1 For power amplification and switching Complementary to 2SD1276 and 2SD1276A I Features * High forward current transfer ratio hFE * High-speed switching * Full-pack package which can be installed to the heat sink with one screw 16.70.3 Unit: mm 10.00.2 5.50.2 4.20.2 2.70.2 7.50.2 3.10.1 4.20.2 Solder Dip (4.0) 14.00.5 I Absolute Maximum Ratings TC = 25C Parameter Collector to base voltage Collector to emitter voltage 2SB0950 2SB0950A 2SB0950 2SB0950A VEBO ICP IC TC = 25C Ta = 25C Tj Tstg PC VCEO Symbol VCBO Rating -60 -80 -60 -80 -5 -8 -4 40 2 150 -55 to +150 C C V A A W V Unit V 1.40.1 1.30.2 0.5+0.2 -0.1 0.80.1 2.540.3 5.080.5 123 Emitter to base voltage Peak collector current Collector current Collector power dissipation 1 : Base 2 : Collector 3 : Emitter EIAJ : SC-67 TO-220F Package Internal Connection C B Junction temperature Storage temperature I Electrical Characteristics TC = 25C Parameter Collector cutoff current Collector cutoff current Emitter cutoff current Collector to emitter voltage 2SB0950 2SB0950A hFE1 hFE2 * Base to emitter voltage Collector to emitter saturation voltage VBE VCE(sat)1 VCE(sat)2 Transition frequency Turn-on time Storage time Fall time Note) *: Rank classification Rank hFE2 Q P fT ton tstg tf VCE = -3 V, IC = - 0.5 A VCE = -3 V, IC = -3 A VCE = -3 V, IC = -3 A IC = -3 A, IB = -12 mA IC = -5 A, IB = -20 mA VCE = -10 V, IC = - 0.5 A, f = 1 MHz IC = -3 A, IB1 = -12 mA, IB2 = 12 mA, VCC = -50 V 20 0.3 2 0.5 2SB0950 2SB0950A 2SB0950 2SB0950A IEBO VCEO ICEO Symbol ICBO Conditions VCB = -60 V, IE = 0 VCB = -80 V, IE = 0 VCE = -30 V, IB = 0 VCE = -40 V, IB = 0 VEB = -5 V, IC = 0 IC = -30 mA, IB = 0 -60 -80 1 000 2 000 Min Typ E Max -200 -200 -500 -500 -2 Unit A A mA V Forward current transfer ratio 10 000 -2.5 -2 -4 V V V MHz s s s 2 000 to 5 000 4 000 to 10 000 Note.) The Part numbers in the Parenthesis show conventional part number. 1 2SB0950, 2SB0950A PC T a 50 -6 (1) TC=Ta (2) With a 100 x 100 x 2mm Al heat sink (3) With a 50 x 50 x 2mm Al heat sink (4) Without heat sink (PC=2W) TC=25C -5 IB=-3.0mA -2.5mA -2.0mA -1.5mA -1.0mA - 0.5mA -3 - 0.4mA - 0.3mA - 0.2mA -1 Power Transistors IC VCE -10 VCE=-3V IC VBE Collector power dissipation PC (W) Collector current IC (A) -4 Collector current IC (A) 40 -8 30 -6 TC=100C -4 25C -25C (1) 20 -2 10 (3) (4) 0 0 20 40 60 (2) -2 0 80 100 120 140 160 0 -1 -2 -3 -4 -5 0 0 - 0.8 -1.6 -2.4 -3.2 Ambient temperature Ta (C) Collector to emitter voltage VCE (V) Base to emitter voltage VBE (V) VCE(sat) IC Collector to emitter saturation voltage VCE(sat) (V) -100 IC/IB=250 -30 -10 -3 -1 TC=100C 25C -25C 106 hFE IC 10000 Cob VCB Collector output capacitance Cob (pF) VCE=-3V IE=0 f=1MHz TC=25C Forward current transfer ratio hFE 3000 1000 300 100 30 10 3 1 - 0.1 - 0.3 105 TC=100C 104 25C - 0.3 - 0.1 -25C 103 - 0.03 - 0.01 - 0.01 - 0.03 - 0.1 - 0.3 -1 -3 -10 102 - 0.01 - 0.03 - 0.1 - 0.3 -1 -3 -10 -1 -3 -10 -30 -100 Collector current IC (A) Collector current IC (A) Collector to base voltage VCB (V) Area of safe operation (ASO) -100 -30 103 Non repetitive pulse TC=25C Rth(t) t (1) Without heat sink (2) With a 100 x 100 x 2mm Al heat sink (1) Thermal resistance Rth(t) (C/W) Collector current IC (A) 102 -10 -3 -1 ICP IC t=1ms 10ms DC 10 (2) - 0.3 - 0.1 1 - 0.03 - 0.01 -1 2SB0950A 2SB0950 10-1 -3 -10 -30 -100 -300 -1000 10-2 10-4 10-3 10-2 10-1 1 10 102 103 104 Collector to emitter voltage VCE (V) Time t (s) 2 Request for your special attention and precautions in using the technical information and semiconductors described in this material (1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company. Please read the following notes before using the datasheets A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited. 2001 MAR |
Price & Availability of 0266
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |