View 2SC2671F_966068.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Transistor
2SC2671(F)
Silicon NPN epitaxial planar type
Unit: mm
For UHF band low-noise amplification s Features
* Low noise figure NF * High gain * High transition frequency fT
0.70.1
5.00.2
4.00.2
0.70.2 12.90.5
s Absolute Maximum Ratings Ta = 25C
Parameter Collector to base voltage Collector to emitter voltage Emitter to base voltage Collector current Collector power dissipation Junction temperature Storage temperature Note) *: REB = 1 k
*
Symbol VCBO VCER VEBO IC PC Tj Tstg
Rating 15 14 2 80 600 150 -55 to +150
Unit V V V mA mW C C
5.10.2
0.45+0.15 -0.1 2.5+0.6 -0.2 1 23 2.5+0.6 -0.2 0.45+0.15 -0.1
1: Emitter 2: Collector 3: Base EIAJ: SC-43A TO-92-B1 Package
s Electrical Characteristics Ta = 25C
Parameter Collector cutoff current Emitter cutoff current Forward current transfer ratio Transition frequency * Collector output capacitance Foward transfer gain Maximum unilateral power gain * Noise figure * Second inter modulation distortion * Third inter modulation distortion * Note) *: LTPD = 10%
*
Symbol ICBO IEBO hFE fT Cob S21e2 GUM NF IM2 IM3
Conditions VCB = 10 V, IE = 0 VEB = 1 V, IC = 0 VCE = 8 V, IC = 40 mA VCE = 8 V, IC = 40 mA, f = 800 MHz VCB = 10 V, IE = 0, f = 1 MHz VCE = 8 V, IC = 40 mA, f = 800 MHz VCE = 8 V, IC = 40 mA, f = 800 MHz VCE = 8 V, IC = 40 mA, f = 800 MHz VCE = 8 V, IC = 40 mA, f1 = 200 MHz f2 = 500 MHz, VO = 100 dB/75 VCE = 8 V, IC = 40 mA, f1 = 600 MHz f2 = 500 MHz, VO = 100 dB/75
Min
2.30.2
Typ
Max 1 1
Unit A A
50 3.5
150 5.5 0.8
300 GHz 1.5 pF dB 15 3.2 dB dB dB dB
9 10 50 75
12 13 2.0 60 86
Publication date: March 2002
SJC00122BED
1
2SC2671(F)
PC Ta
1.0
60
IC VCE
IB = 400 A Ta = 25C 350 A 120
IC VBE
VCE = 8 V
Collector power dissipation PC (W)
0.8
50
100
Collector current IC (mA)
Collector current IC (mA)
300 A 40 250 A 200 A 150 A 20 100 A 50 A
80
Ta = 75C
25C
-25C
0.6
30
60
0.4
40
0.2
10
20
0
0
40
80
120
160
200
240
0
0
2
4
6
8
10
12
0
0
0.4
0.8
1.2
1.6
2.0
Ambient temperature Ta (C)
Collector to emitter voltage VCE (V)
Base to emitter voltage VBE (V)
VCE(sat) IC
Collector to emitter saturation voltage VCE(sat) (V)
100 30 10 3 1 0.3 0.1 0.03 0.01 0.1 0 0.1 Ta = 75C, 25C, -25C IC / IB = 10 600
hFE IC
VCE = 8 V 12
fT IE
VCB = 8 V f = 800 MHz Ta = 25C
Forward current transfer ratio hFE
400 Ta = 75C 300 25C 200 -25C 100
Transition frequency fT (GHz)
500
10
8
6
4
2
0.3
1
3
10
30
100
0.3
1
3
10
30
100
0 - 0.1 - 0.3
-1
-3
-10
-30
-100
Collector current IC (mA)
Collector current IC (mA)
Emitter current IE (mA)
Cob VCB
2.4
GUM IC
Maximum unilateral power gain GUM (dB)
IE = 0 f = 1 MHz Ta = 25C 24 VCE = 8 V f = 800 MHz Ta = 25C 12
NF IC
VCE = 8 V (Rg = 50 ) f = 800 MHz Ta = 25C
Collector output capacitance Cob (pF)
2.0
20
10
Noise figure NF (dB)
1.6
16
8
1.2
12
6
0.8
8
4
0.4
4
2
0 0.1
0.3
1
3
10
30
100
0 0.1
0.3
1
3
10
30
100
0 0.1
0.3
1
3
10
30
100
Collector to base voltage VCB (V)
Collector current IC (mA)
Collector current IC (mA)
2
SJC00122BED
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of 2SC2671F

	To Download 2SC2671F Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .