View 4986_968225.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

(R)
74LCX652
LOW VOLTAGE CMOSOCTAL BUSTRANSCEIVER/REGISTER (3-STATE) WITH 5V TOLERANT INPUTS AND OUTPUTS
s s
s
s
s s
s
s
s s
5V TOLERANT INPUTS AND OUTPUTS HIGH SPEED: tPD =7.0 ns (MAX.) at VCC = 3V POWER-DOWN PROTECTION ON INPUTS AND OUTPUTS SYMMETRICAL OUTPUT IMPEDANCE: |IOH| = IOL = 24 mA (MIN) PCI BUS LEVELS GUARANTEED AT 24mA BALANCED PROPAGATION DELAYS: tPLH tPHL OPERATING VOLTAGE RANGE: VCC (OPR) = 2.0V to 3.6V (1.5V Data Retention) PIN AND FUNCTION COMPATIBLE WITH 74 SERIES 652 LATCH-UP PERFORMANCE EXCEEDS 500mA ESD PERFORMANCE: HBM >2000V; MM > 200V
M (Micro Package)
T (TSSOP Package)
ORDER CODES : 74LCX652M 74LCX652T This device consists of bus transceiver circuits with 3-state outputs, D type flip-flops, and control circuitry arranged for multiplexed trasmission of data directly from the input bus or from the internal storage registers. Enable (GAB) and (GBA) pins are provided to control the transceiver functions. Select AB and Select BA control pins are provided to select whether real-time or stored data is transfered. A low input level selects real-time, and a high selects stored data. Data on the A or B bus, or both, can be stored in the internal D flip-flop by low-to high transitions at the appropriate clock pins (CAB or CBA) regardless of the select or enable control pins.
DESCRIPTION The LCX652 is a low voltage CMOS OCTAL BUS TRANSCEIVER AND REGISTER (3-STATE) fabricated with sub-micron silicon gate and double-layer metal wiring C2MOS technology. It is ideal for low power and high speed 3.3V applications; it can be interfaced to 5V signal environment for both inputs and outputs. PIN CONNECTION AND IEC LOGIC SYMBOLS
February 1999
1/13
74LCX652
When select AB and select BA are in the real-time transfer mode, it is also possible to store data without using the internal D-type flip-flops by simultaneously enabling GAB or GBA. In this configuration each output reinforces its input. It has same speed performance at 3.3V than 5V, INPUT AND OUTPUT EQUIVALENT CIRCUIT AC/ACT family, combined with a lower power consumption. All inputs and outputs are equipped with protection circuits against static discharge, giving them 2KV ESD immunity and transient excess voltage.
PIN DESCRIPTION
PIN No 1 2 3 4, 5, 6, 7, 8, 9, 10, 11 20, 19, 18, 17, 16, 15, 14, 13 21 22 23 12 24 SYMBOL CAB SAB GAB A1 to A8 B1 to B8 GBA SBA CBA GND VCC NAME AND FUNCTION A to B Clock Input (LOW to HIGH, Edge-Trigged) Select A to B Source Input Direction Control Input A Data Inputs/Outputs B Data Inputs/Outputs Output Enable Input (Active LOW) Select B to A Source Input B to A Clock Input (LOW to HIGH, Edge-Triggered) Ground (0V) Positive Supply Voltage
2/13
74LCX652
LOGIC DIAGRAM
TIMING CHART
CAB CBA
3/13
74LCX652
TRUTH TABLE
GAB GBA CAB CBA SAB SBA A INPUTS X L H X X X X X Z INPUTS B INPUTS Z INPUTS FUNCTIO N Both the A bus and the B bus are inputs The output functions of the A and B bus are disabled Both the A and B busses are used as inputs to the internal flip-flops. Data on the bus will be stored on low to high transition of the clock inputs The A bus are outputs and the B bus are inputs The data on the B bus are displayed on the A bus The data on the B bus are displayed on the A bus and are stored in the B internal flip-flop on low to high transition of th clock pulse The data stored in the B internal flip-flop are displayed on the A bus The data on the B bus are stored in the B internal flip-flop on low to high transition of the clock pulse. The states of the internal flip-flops propagate directly to the A bus
OUTPUTS X* X* L L X* X* X X X H H X X X L L L H L H Qn L H
INPUTS L H L H X L H
INPUTS X X* X* H H X X* X* H H X X L L X X L H L H X L H
OUTPUTS The A bus are inputs and the B bus are outputs L H L H Qn L H The data on the A bus are displayed on the B bus and are stored in the A internal flip-flop on low to high transition of the clock pulse The data stored in the A internal flip-flops are displayed on the B bus The data on the A bus are stored in the A internal flip-flop on low to high transition of the clock pulse. The states of the internal flip-flops propagate directly on the B bus The data on the A bus are displayed on the B bus
OUTPUTS OUTPUTS Both the A bus and the B bus are outputs H
X Z Qn *
L
X
X
H
H
Qn
Qn
The data stored in the internal flip-flops are displayed on the A and B bus respectively
: DON'T CARE : HIGHIMPEDANCE : THE DATA STORED TO THE INTERNALFLIP-FLOPS BY MOST RECENTLOW TO HIGH TRANSITION OF THE CLOCK INPUTS : THE DATAAT THEA AND B BUSWILL BE STORED TO THE INTERNALFLIP-FLOPS ON EVERY LOW TO HIGH TRANSITIONOF THECLOCK INPUTS
4/13
74LCX652
ABSOLUTE MAXIMUM RATINGS
Symbol VCC VI VO VO IIK IOK IO ICC IGND Tstg TL Supply Voltage DC Input Voltage DC Output Voltage (OFF state) DC Output Voltage (High or Low State) (note1) DC Input Diode Current DC Output Diode Current (note2) DC Output Source/Sink Current DC Supply Current per Supply Pin DC Ground Current per Supply Pin Storage Temperature Lead Temperature (10 sec) Parameter Value -0.5 to + 7.0 -0.5 to + 7.0 -0.5 to + 7.0 -0.5 to VCC + 0.5 - 50 50 50 100 100 -65 to +150 300 Unit V V V V mA mA mA mA mA
o o
C C
Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition is not implied. 1) IO absolute maximum rating must be observed 2) VO < GND, VO > VCC
RECOMMENDED OPERATING CONDITIONS
Symbol VCC VI VO VO IOH, IOL IOH, IOL Top dt/dv Input Voltage Output Voltage (OFF state) Output Voltage (High or Low State) High or Low Level Output Current (VCC = 3.0 to 3.6V) High or Low Level Output Current (VCC = 2.7 to 3.0V) Operating Temperature: Input Transition Rise or Fall Rate (V CC = 3.0V) (note 2) Parameter Supply Voltage (note 1) Value 2.0 to 3.6 0 to 5.5 0 to 5.5 0 to VCC 24 12 -40 to +85 0 to 10 Unit V V V V mA mA
o
C
ns/V
1) Truth Table guaranteed: 1.5V to3.6V 2) VIN from0.8V to 2.0V
5/13
74LCX652
DC SPECIFICATIONS
Symb ol Parameter V CC (V) VIH VIL VOH High Level Input Voltage Low Level Input Voltage High Level Output Voltage 2.7 to 3.6 2.7 to 3.6 2.7 3.0 VOL Low Level Output Voltage 2.7 to 3.6 2.7 3.0 3.0 II IOZ Ioff ICC Input Leakage Current 3 State Output Leakage Current Power Off Leakage Current Quiescent Supply Current 2.7 to 3.6 2.7 to 3.6 0 2.7 to 3.6 VI = VI H or V IL Test Co nditi ons Value -40 to 85 o C Min. 2.0 0.8 IO=-100 A V CC -0.2 IO=-12 mA IO=-18 mA IO=-24 mA VI = VI H or V IL IO=100 A IO=12 mA IO=16 mA IO=24 mA VI = 0 to 5.5 V VI = VIH or VIL VO = 0 to 5.5V VI or VO = 5.5V VI = VCC or GND VI or VO = 3.6 to 5.5V ICC ICC incr. per input 2.7 to 3.6 VIH = VCC -0.6V 2.2 2.4 2.2 0.2 0.4 0.4 0.55 5 5 100 10 10 500 A A A A A V V Max. V V Un it
DYNAMIC SWITCHING CHARACTERISTICS
Symb ol Parameter V CC (V) VOLP VOLV Dynamic Low Voltage Quiet Output (note 1) 3.3 C L = 50 pF V IL = 0 V V IH = 3.3V Test Con dition s Min . Value T A = 25 o C T yp. 0.8 -0.8 V Max. Un it
1) Number ofoutputs defined as "n". Measured with"n-1" outputs switching from HIGH to LOW or LOW t o HIGH. The remaining output is measured in the LOW state.
6/13
74LCX652
AC ELECTRICAL CHARACTERISTICS (CL = 50 pF, RL = 500 , Input tr = tf = 2.5 ns)
Symb ol Parameter V CC (V) tPLH tPHL tPLH tPHL tPLH tPHL tPZL tPZH tPLZ tPHZ ts th tw fMAX tOSLH tOSHL Propagation Delay Time CAB or CBA to An or Bn Propagation Delay Time An to Bn or Bn to An Propagation Delay Time SAB or SBA to An or Bn Output Enable Time GAB, GBA to An or Bn Output Disable Time GAB, GBA to An or Bn Setup Time, HIGh or LOW Level Data to CAB, CBA Hold Time, HIGh or LOW Level Data to CAB, CBA CAB, CBA Pulse Width, HIGH or LOW Clock Pulse Frequency Output to Output Skew Time (note 1, 2) 2.7 3.0 to 3.6 2.7 3.0 to 3.6 2.7 3.0 to 3.6 2.7 3.0 to 3.6 2.7 3.0 to 3.6 2.7 3.0 to 3.6 2.7 3.0 to 3.6 2.7 3.0 to 3.6 3.0 to 3.6 3.0 to 3.6 Test Con dition Waveform Value -40 to 85 o C Min. Max. 1.5 9.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 1.5 2.5 2.5 1.5 1.5 4.0 3.3 150 1.0 8.5 8.0 7.0 9.5 8.5 9.5 8.5 9.5 8.5 Un it
3 1 1 2 2 3 3 4 3
ns ns ns ns ns ns ns ns MHz ns
1) Skew is defined as the absolute value of the difference between the actual propagation delay for any twooutputs of the same device switching in the same direction, either HIGH or LOW (tOSLH = |tPLHm - tPLHn|, tOSHL = |tPHLm - tpHLn|) 2) Parameter guaranteed by design
CAPACITIVE CHARACTERISTICS
Symb ol Parameter V CC (V) C IN C i/o CPD Input Capacitance I/O Capacitance Power Dissipation Capacitance (note 1) 3.3 3.3 3.3 VIN = 0 to VCC VIN = 0 to VCC fIN = 10MHz VIN = 0 or VCC Test Co nditi ons Min. Valu e T A = 25 C T yp. 6 10 36 Max. pF pF pF
o
Un it
1) CPD isdefined as the value of the IC'sinternal equivalent capacitance which is calculated fromthe operating current consumption without load. Average operting current can be obtained by the following equation. I CC(opr) = CPD * VCC * fIN + ICC/8 (per circuit)
7/13
74LCX652
TEST CIRCUIT
T EST tPLH , tPHL tPZL , tPLZ tPZH , tPHZ
CL = 50 pF or equivalent (includes jigand probe capacitance) RL = R1 = 500 orequivalent RT = ZOUT of pulse generator (typically 50)
SW IT CH Open 6V GND
WAVEFORM 1: PROPAGATION DELAYS, SAB, SBA, An, Bn TIMES (f=1MHz; 50% duty cycle)
8/13
74LCX652
WAVEFORM 2: OUTPUT ENABLE AND DISABLE TIMES (f=1MHz; 50% duty cycle)
9/13
74LCX652
WAVEFORM 3: PROPAGATION DELAY TIMES (f=1MHz; 50% duty cycle)
WAVEFORM 4: PULSE WIDTH
10/13
74LCX652
SO-24 MECHANICAL DATA
mm MIN. A a1 a2 b b1 C c1 D E e e3 F L S 7.40 0.50 15.20 10.00 1.27 13.97 7.60 1.27 8 (max.) 0.291 0.19 15.60 10.65 0.35 0.23 0.50 45 (typ.) 0.598 0.393 0.05 0.55 0.299 0.050 0.614 0.420 0.10 TYP. MAX. 2.65 0.20 2.45 0.49 0.32 0.013 0.009 0.020 0.004 MIN. inch TYP. MAX. 0.104 0.007 0.096 0.019 0.012
DIM.
L C c1
a2
A
e3
E
D
24
13
1
12
F
a1
b
e
s
P013T
11/13
b1
74LCX652
TSSOP24 MECHANICAL DATA
mm MIN. A A1 A2 b c D E E1 e K L 0o 0.50 0.05 0.85 0.19 0.09 7.7 6.25 4.3 7.8 6.4 4.4 0.65 BSC 4o 0.60 8o 0.70 0o 0.020 0.10 0.9 TYP. MAX. 1.1 0.15 0.95 0.30 0.2 7.9 6.5 4.48 0.002 0.335 0.0075 0.0035 0.303 0.246 0.169 0.307 0.252 0.173 0.0256 BSC 4o 0.024 8o 0.028 0.004 0.354 MIN. inch TYP. MAX. 0.433 0.006 0.374 0.0118 0.0079 0.311 0.256 0.176
DIM.
A
A2 A1 b e K c L E
D
E1
PIN 1 IDENTIFICATION
1
12/13
74LCX652
Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specification mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a trademark of STMicroelectronics (c) 1999 STMicroelectronics - Printed in Italy - All Rights Reserved STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Italy - Japan - Korea - Malaysia - Malta - Mexico - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A. http://www.st.com .
13/13

▲Up To Search▲

Price & Availability of 4986

	To Download 4986 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .