 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| FUJITSU MEDIA DEVICE DATA SHEET DS01-41102-1E CAPACITORS Functional Polymer Capacitors (FPCAP) RE Series s DESCRIPTIONS Recent trends in development of digital, high-frequency electronic devices have led to increasing demand for capacitors with reduced ripple and noise characteristics, plus compact size, high capacitance, and low ESR. The FPCAP capacitor utilizes a revolutionary new proprietary cathode formation process for greatly reducing ESR and improving efficiency with a variety of power supplies, as well as ripple and noise reduction. The FUJITSU RE series FPCAP uses a functional conductive polymer cathode layer material to greatly reduce ESR in comparison with previous processes using electrolytic fluids. The use of a solidified cathode layer eliminates the worry of leakage. The RE series capacitor is ideal for use in applications demanding higher efficiency, low noise, reduced size, and high performance such as PC power supply smoothing and CPU backup. s FEATURES * Low ESR * High ripple effect * High reliability, long life s PACKAGES RE Series s PRODUCT LINEUP (1) Standard type (Production symbol: 01) Static Rated voltage capaciPart number (surge voltage) tance (V) (F) FP-6R3RE470M-01R FP-6R3RE151M-01R FP-6R3RE221M-01R FP-6R3RE331M-01R FP-010RE330M-01R FP-010RE680M-01R FP-010RE101M-01R FP-010RE221M-01R FP-016RE220M-01R FP-016RE330M-01R FP-016RE470M-01R FP-016RE680M-01R FP-016RE101M-01R FP-016RE151M-01R FP-020RE150M-01R FP-020RE220M-01R FP-020RE330M-01R FP-020RE470M-01R FP-020RE680M-01R FP-020RE101M-01R FP-025RE100M-01R FP-025RE150M-01R FP-025RE220M-01R FP-025RE330M-01R FP-025RE470M-01R 25 (28.7) 20 (23) 16 (18.4) 10 (11.5) 6.3 (7.2) 47 150 220 330 33 68 100 220 22 33 47 68 100 150 15 22 33 47 68 100 10 15 22 33 47 Loss angle tangent 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 0.06 Leak current (A) 5.92 18.90 27.72 41.58 6.60 13.60 20.00 44.00 7.04 10.56 15.04 21.76 32.00 48.00 6.00 8.80 13.20 18.80 27.20 40.00 5.00 7.50 11.00 16.50 23.50 Maximum Case size ESR capacity (100 kHz) D x L ripple current (mm) (m) (mA rms) 60 30 30 25 70 50 30 27 70 70 60 36 30 28 90 70 70 40 36 30 90 70 40 35 35 1430 2780 3000 3500 1370 2000 2670 3370 1350 1370 1830 2700 2740 3260 1200 1300 1710 2450 2600 3210 1150 1650 2330 2900 2980 6.3 x 7.0 8 x 11.5 8 x 11.5 10 x 12.5 6.3 x 7.0 6.3 x 10.0 8 x 11.5 10 x 12.5 6.3 x 7.0 6.3 x 7.0 6.3 x 10.0 8 x 11.5 8 x 11.5 10 x 12.5 6.3 x 7.0 6.3 x 7.0 6.3 x 10.0 8 x 11.5 8 x 11.5 10 x 12.5 6.3 x 7.0 6.3 x 10.0 8 x 11.5 10 x 12.5 10 x 12.5 (2) High capacity type (Production symbol: S1) Static Loss Rated voltage capaciangle Part number (surge voltage) tance tangent (V) (F) FP-4R0RE561M-S1R FP-4R0RE821M-S1R FP-6R3RE391M-S1R FP-6R3RE681M-S1R FP-010RE471M-S1R 2 4.0 (4.6) 6.3 (7.2) 10 (11.5) 560 820 390 680 470 0.08 0.08 0.08 0.08 0.08 Leak current (A) 224.00 328.00 245.70 428.40 470.00 Maximum Case size ESR capacity (100 kHz) D x L ripple current (mm) (m) (mA rms) 14 12 16 13 15 4080 5040 3810 4840 4510 8 x 11.5 10 x 12.5 8 x 11.5 10 x 12.5 10 x 12.5 RE Series s PRINCIPAL CHARACTERISTICS Parameter Category temperature range Maximum temperature at rated voltage Rated voltage range Static capacitance range Test method (JIS C 5101-4-1998) Measurement frequency : 120 Hz 20% Measurement voltage : 0.5 Vrms or less, + 2.1 Vdc to 2.5 Vdc Measurement circuit : Equivalent series circuit Measurement temperature : 20 C 2 C Value Min. Max. -55 4.0 10 +105 +105 25 820 Unit C C V*DC F Static capacitance tolerance -20 +20 % Loss angle tangent Leak current FP-6R3REXXXM-01R FP-010REXXXM-01R FP-016REXXXM-01R FP-020REXXXM-01R FP-025REXXXM-01R FP-4R0REXXXM-S1R FP-6R3REXXXM-S1R FP-010RE471M-S1R FP-6R3RE470M-01R FP-6R3RE151M-01R FP-6R3RE221M-01R FP-6R3RE331M-01R FP-010RE330M-01R FP-010RE680M-01R FP-010RE101M-01R FP-010RE221M-01R FP-016RE220M-01R FP-016RE330M-01R FP-016RE470M-01R FP-016RE680M-01R FP-016RE101M-01R FP-016RE151M-01R FP-020RE150M-01R FP-020RE220M-01R FP-020RE330M-01R FP-020RE470M-01R FP-020RE680M-01R FP-020RE101M-01R FP-025RE100M-01R FP-025RE150M-01R FP-025RE220M-01R FP-025RE330M-01R FP-025RE470M-01R FP-4R0RE561M-S1R FP-4R0RE821M-S1R FP-6R3RE391M-S1R FP-6R3RE681M-S1R FP-010RE471M-S1R Measurement frequency : 120 Hz 20% Measurement voltage : 0.5 Vrms or less, + 2.1 Vdc to 2.5 Vdc Measurement circuit : Equivalent series circuit Measurement temperature: 20 C 2 C Apply rated voltage through serial protective resistance of approx. 1000 or less 0.07 0.07 0.06 0.06 0.06 0.08 0.08 0.08 5.92 18.90 27.72 41.58 6.60 13.60 20.00 44.00 7.04 10.56 15.04 21.76 32.00 48.00 6.00 8.80 13.20 18.80 27.20 40.00 5.00 7.50 11.00 16.50 23.50 224.00 328.00 245.70 428.40 470.00 A (Continued) 3 RE Series Parameter FP-6R3RE470M-01R FP-6R3RE151M-01R FP-6R3RE221M-01R FP-6R3RE331M-01R FP-010RE330M-01R FP-010RE680M-01R FP-010RE101M-01R FP-010RE221M-01R FP-016RE220M-01R FP-016RE330M-01R FP-016RE470M-01R FP-016RE680M-01R FP-016RE101M-01R FP-016RE151M-01R FP-020RE150M-01R FP-020RE220M-01R FP-020RE330M-01R FP-020RE470M-01R FP-020RE680M-01R FP-020RE101M-01R FP-025RE100M-01R FP-025RE150M-01R FP-025RE220M-01R FP-025RE330M-01R FP-025RE470M-01R FP-4R0RE561M-S1R FP-4R0RE821M-S1R FP-6R3RE391M-S1R FP-6R3RE681M-S1R FP-010RE471M-S1R Test method (JIS C 5101-4-1998) Value Min. Max. 60 30 30 25 70 50 30 27 70 70 60 36 30 28 90 70 70 40 36 30 90 70 40 35 35 14 12 16 13 15 Unit Equivalent series resistance (ESR) Measurement frequency : 100 kHz 10% Measurement voltage : 0.5 Vrms or less, +2.1 Vdc to 2.5 Vdc Measurement circuit : Equivalent series circuit Measurement temperature : 20 C 2 C m (Continued) 4 RE Series Parameter FP-6R3RE470M-01R FP-6R3RE151M-01R FP-6R3RE221M-01R FP-6R3RE331M-01R FP-010RE330M-01R FP-010RE680M-01R FP-010RE101M-01R FP-010RE221M-01R FP-016RE220M-01R FP-016RE330M-01R FP-016RE470M-01R FP-016RE680M-01R FP-016RE101M-01R Maximum FP-016RE151M-01R allowable FP-020RE150M-01R ripple FP-020RE220M-01R current FP-020RE330M-01R FP-020RE470M-01R FP-020RE680M-01R FP-020RE101M-01R FP-025RE100M-01R FP-025RE150M-01R FP-025RE220M-01R FP-025RE330M-01R FP-025RE470M-01R FP-4R0RE561M-S1R FP-4R0RE821M-S1R FP-6R3RE391M-S1R FP-6R3RE681M-S1R FP-010RE471M-S1R Test method (JIS C 5101-4-1998) Value Min. Max. 1430 2780 3000 3500 1370 2000 2670 3370 1350 1370 1830 2700 2740 3260 1200 1300 1710 2450 2600 3210 1150 1650 2330 2900 2980 4080 5040 3810 4840 4510 Unit 100 kHz Frequency (Hz) Coefficient Frequency compensation coefficient 120 1k 10 k 100 k 300 k mArms 0.10 0.45 0.50 1.00 1.00 (Continued) 5 RE Series Parameter Static capacitance variability (C/C) FP-6R3REXXXM-01R FP-010REXXXM-01R FP-016REXXXM-01R Loss FP-020REXXXM-01R angle FP-025REXXXM-01R tangent FP-4R0REXXXM-S1R FP-6R3REXXXM-S1R FP-010RE471M-S1R FP-6R3RE470M-01R FP-6R3RE151M-01R FP-6R3RE221M-01R FP-6R3RE331M-01R FP-010RE330M-01R FP-010RE680M-01R FP-010RE101M-01R FP-010RE221M-01R FP-016RE220M-01R FP-016RE330M-01R FP-016RE470M-01R FP-016RE680M-01R FP-016RE101M-01R FP-016RE151M-01R FP-020RE150M-01R Leak current FP-020RE220M-01R FP-020RE330M-01R FP-020RE470M-01R FP-020RE680M-01R FP-020RE101M-01R FP-025RE100M-01R FP-025RE150M-01R FP-025RE220M-01R FP-025RE330M-01R FP-025RE470M-01R FP-4R0RE561M-S1R FP-4R0RE821M-S1R FP-6R3RE391M-S1R FP-6R3RE681M-S1R FP-010RE471M-S1R Test method (JIS C 5101-4-1998) Value Min. Max. -3 +3 0.07 0.07 0.06 0.06 0.06 0.08 0.08 0.08 5.92 18.90 27.72 41.58 6.60 13.60 20.00 44.00 7.04 10.56 15.04 21.76 32.00 48.00 6.00 8.80 13.20 18.80 27.20 40.00 5.00 7.50 11.00 16.50 23.50 224.00 328.00 245.70 428.40 470.00 Unit % Solder thermal resistance Solder type : H60A, H60S, H63A Flux : Rosin ethanol solution (25 wt%) Solder temperature : 260 C 5 C (350 C 10 C) Immersion time : 10 s 1 s (3 s 1s) Immersion depth : 1.5 mm-2 mm from sleeve surface in pin direction Immersion speed : 25 mm/s 2.5 mm/s Testing method : Immersion in solder vat through 1.2 t board A (Continued) 6 RE Series Parameter Static capacitance variability (C/C) FP-6R3REXXXM-01R FP-010REXXXM-01R FP-016REXXXM-01R Loss FP-020REXXXM-01R angle FP-025REXXXM-01R tangent FP-4R0REXXXM-S1R FP-6R3REXXXM-S1R FP-010RE471M-S1R FP-6R3RE470M-01R FP-6R3RE151M-01R FP-6R3RE221M-01R FP-6R3RE331M-01R FP-010RE330M-01R FP-010RE680M-01R FP-010RE101M-01R FP-010RE221M-01R High FP-016RE220M-01R temperature FP-016RE330M-01R high FP-016RE470M-01R humidity FP-016RE680M-01R (Constant) FP-016RE101M-01R FP-016RE151M-01R FP-020RE150M-01R Leak current FP-020RE220M-01R FP-020RE330M-01R FP-020RE470M-01R FP-020RE680M-01R FP-020RE101M-01R FP-025RE100M-01R FP-025RE150M-01R FP-025RE220M-01R FP-025RE330M-01R FP-025RE470M-01R FP-4R0RE561M-S1R FP-4R0RE821M-S1R FP-6R3RE391M-S1R FP-6R3RE681M-S1R FP-010RE471M-S1R Test method (JIS C 5101-4-1998) Value Min. Max. -10 +10 0.105 0.105 0.09 0.09 0.09 0.12 0.12 0.12 5.92 18.90 27.72 41.58 6.60 13.60 20.00 44.00 7.04 10.56 15.04 21.76 32.00 48.00 6.00 8.80 13.20 18.80 27.20 40.00 5.00 7.50 11.00 16.50 23.50 224.00 328.00 245.70 428.40 470.00 Unit % Measurement temperature : 60 C 2 C Test time : 1000 h 48 h Relative humidity : 90% to 95% Measurement conditions : After recovery to room temperature A (Continued) 7 RE Series Parameter Static capacitance variability (C/C) FP-6R3REXXXM-01R FP-010REXXXM-01R FP-016REXXXM-01R Loss anFP-020REXXXM-01R gle tanFP-025REXXXM-01R gent FP-4R0REXXXM-S1R FP-6R3REXXXM-S1R FP-010RE471M-S1R FP-6R3RE470M-01R FP-6R3RE151M-01R FP-6R3RE221M-01R FP-6R3RE331M-01R FP-010RE330M-01R FP-010RE680M-01R FP-010RE101M-01R FP-010RE221M-01R FP-016RE220M-01R FP-016RE330M-01R FP-016RE470M-01R FP-016RE680M-01R FP-016RE101M-01R FP-016RE151M-01R FP-020RE150M-01R Leak current FP-020RE220M-01R FP-020RE330M-01R FP-020RE470M-01R FP-020RE680M-01R FP-020RE101M-01R FP-025RE100M-01R FP-025RE150M-01R FP-025RE220M-01R FP-025RE330M-01R FP-025RE470M-01R FP-4R0RE561M-S1R FP-4R0RE821M-S1R FP-6R3RE391M-S1R FP-6R3RE681M-S1R FP-010RE471M-S1R Test method (JIS C 5101-4-1998) Value Min. Max. -20 +20 0.105 0.105 0.09 0.09 0.09 0.12 0.12 0.12 5.92 18.90 27.72 41.58 6.60 13.60 20.00 44.00 7.04 10.56 15.04 21.76 32.00 48.00 6.00 8.80 13.20 18.80 27.20 40.00 5.00 7.50 11.00 16.50 23.50 224.00 328.00 245.70 428.40 470.00 Unit % Durability Testing temperature : 105 C 2 C Testing voltage : Rated voltage Test time : 2000 h 48 h Measurement conditions : After discharge following 2 or more hours at room temperature A 8 RE Series s PART NUMBER DESIGNATION FP 010 (1) RE 221 (2) M (3) 01 (4) R (5) (6) (1) Rated voltage: 3 digit rated voltage code : (Example) 6.3 V6R3 10 V010 (2) Static capacitance: 3 digit static capacitance in F : (Example) 10 F100 100 F101 (3) Static capacitance tolerance : M: 20% (4) Production symbol : 01 : Standard type S1 : High capacitance type (5) Taping symbol: R: Long lead J: 2.5mm pitch taping P: 5mm pitch taping (6) Control number s MARKING AND POLARITY INDICATION Case diameter Manufacturer mark 6.3 8, 10 Manufacturer mark Temperature range Negative terminal Voltage, capacitance Voltage, capacitance -55 C + 105 C Cathode indicator Capacitance tolerance Cathode indicator Capacitance tolerance Positive terminal Last digit of Month of manufacture Control no. Last digit of year Month of manufacture Control no. Ex: Jan-Sep.: 1-9, Oct.: O, Nov: N, Dec: D Ex: Jan-Sep.: 1-9, Oct.: O, Nov: N, Dec: D 9 RE Series s PACKAGE DIMENSION D + 0.5 Max. + P 0.5 - d L + Max. 15 Min. 5 Min. D x L 6.3 x 7.0 6.3 x 10 8 x 11.5 10 x 12.5 d 0.45 0.6 0.6 0.6 P 2.5 2.5 3.5 5.0 1.0 1.0 1.5 1.5 s CLEANSING The following are recommended for cleansing of boards after soldering. * High quality alcohol-based cleansers such as Pine Alpha, Clean Thru, or Techno Care * Freon replacements such as AK225, or IPA * User should verify effectiveness according to soldering conditions. Cleaning by immersion or ultrasound methods should not be done for more than five minutes. The temperature of the solution used for immersion should be 60 C or lower. The solution used for immersion should be controlled to be kept clean. After cleansing, boards should not be stored in the atmosphere in which they were cleaned, and should not be sealed. Drying temperature should not exceed the maximum operating temperature of the board. Note that if boards are dried immediately after cleansing, sleeves may undergo secondary shrinkage. Users should consult with FUJITSU MEDIA DEVICE representatives regarding cleansing solutions and methods. * * * * * 10 RE Series s TAPING (1) 2.5-mm pitch taping (6.3) P2 D P3 e f d H W1 W0 W2 W P h1 h2 L h D0 P1 (2) 5.0-mm pitch taping (6.3, 8) P2 D P3 e f d H0 H W1 W0 W2 W P h1 h2 L t h2 t t h D0 P1 (3) 5.0-mm pitch taping (10) h1 P2 D P3 e P f d H W1 W0 W2 W L D0 h P1 * Taping Quantity Case diameter 6.3 8 10 Quantity (per case) 2, 000 1, 000 500 11 RE Series (Unit : mm) Tolerance 10 0.6 5.0 12.7 12.7 6.4 20.0 18.0 9.0 4.0 2.0 0.7 +0.5 Max. 0.05 +0.8 -0.2 1.0 0.3 0.5 0.5 0.75 +1.0 -0.5 0.5 0.2 Max. 0.2 Parameter Case outside diameter Lead diameter Lead pitch Pitch between capacitors Feed hole pitch Feed hole position offset Lead clinch height Product underside position Backing width Feed hole position offset Feed hole diameter Product slope Tape thickness Symbol D d f P P1 P2 H0 H W W1 D0 h t 18.5 18.0 9.0 4.0 2.0 0.7 2.5 12.7 12.7 6.35 16.0 17.5 6.3 0.45 5.0 Dimension 8 0.6 5.0 12.7 12.7 6.4 16.0 20.5 18.0 9.0 4.0 2.0 0.7 12 RE Series s APPENDIX (Typ. values) (1) Frequency characteristics Model : FP-010RE221M-01R (10 V 220 F 10 x 12.5) 10 10 E.S.R. () 1 Impedance () 1 10 100 1 0.1 0.1 0.01 0.1 1000 10000 0.01 0.1 1 10 100 1000 10000 Frequency (kHz) Frequency (kHz) Model : FP-016RE330M-01R (16 V 33 F 6.3 x 7) 10 100 E.S.R. () 1 Impedance () 10 1 0.1 0.1 0.01 0.1 1 10 100 1000 10000 0.01 0.1 1 10 100 1000 10000 Frequency (kHz) Frequency (kHz) (2) Temperature Characteristics Model : FP-010RE221M-01R (10 V 220 F 10 x 12.5) 20 Chapacitance Change (%) 1 10 E.S.R. () 0.1 0 0.01 -10 -20 -60 -40 -20 0 20 40 60 80 100 120 0.001 -60 -40 -20 0 20 40 60 80 100 120 Temperature (C) Temperature (C) 13 RE Series FUJITSU MEDIA DEVICES LIMITED All Rights Reserved. The contents of this document are subject to change without notice. Customers are advised to consult with FUJITSU MEDIA DEVICES sales representatives before ordering. The information and circuit diagrams in this document are presented as examples of device applications, and are not intended to be incorporated in devices for actual use. Also, FUJITSU MEDIA DEVICES is unable to assume responsibility for infringement of any patent rights or other rights of third parties arising from the use of this information or circuit diagrams. The products described in this document are designed, and manufactured as contemplated for general use, including without limitation, ordinary industrial use, general office use, personal use, and household use, but are not designed, developed and manufactured as contemplated (1) for use accompanying fatal risks or dangers that, unless extremely high safety is secured, could have a serious effect to the public, and could lead directly to death, personal injury, severe physical damage or other loss (i.e., nuclear reaction control in nuclear facility, aircraft flight control, air traffic control, mass transport control, medical life support system, missile launch control in weapon system), or (2) for use requiring extremely high reliability (i.e., submersible repeater and artificial satellite). Please note that Fujitsu will not be liable against you and/or any third party for any claims or damages arising in connection with above-mentioned uses of the products. Any electronic devices have inherently a certain rate of failure. You must protect against injury, damage or loss from such failures by incorporating safety design measures into your facility and equipment such as redundancy, fire protection, and prevention of over-current levels and other abnormal operating conditions. If any products described in this document represent goods or technologies subject to certain restrictions on export under the Foreign Exchange and Foreign Trade Control Law of Japan, the prior authorization by Japanese government should be required for export of those products from Japan. F0103 (c) FUJITSU LIMITED Printed in Japan |
Price & Availability of E141102
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |