 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TC7MZ374FK TOSHIBA CMOS Digital Integrated Circuit Silicon Monolithic TC7MZ374FK Low Voltage Octal D-Type Flip-Flop with 5 V Tolerant Inputs and Outputs The TC7MZ374FK is a high performance CMOS octal D-type flip flop. Designed for use in 3.3 V systems, it achieves high speed operation while maintaining the CMOS low power dissipation. The device is designed for low-voltage (3.3 V) VCC applications, but it could be used to interface to 5 V supply environment for both inputs and outputs. This 8 bit D-type flip-flop is controlled by a clock input (CK) and a output enable input ( OE ). When the OE input is high, the eight outputs are in a high impedance state. All inputs are equipped with protection circuits against static discharge. Weight: 0.03 g (typ.) Features * * * * * * * Low voltage operation: VCC = 2.0~3.6 V High speed operation: tpd = 8.5 ns (max) (VCC = 3.0~3.6 V) Output current: |IOH|/IOL = 24 mA (min) (VCC = 3.0 V) Latch-up performance: 500 mA Package: VSSOP (US20) Power down protection is provided on all inputs and outputs. Pin and function compatible with the 74 series (74AC/VHC/HC/F/ALS/LS etc.) 374 type. 000630EBA1 * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc.. * The Toshiba products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.). These Toshiba products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of Toshiba products listed in this document shall be made at the customer's own risk. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice. 2000-07-04 1/7 TC7MZ374FK Pin Assignment (top view) IEC Logic Symbol OE CK 1 11 EN C1 OE 1 2 3 4 5 6 7 8 9 20 19 18 17 16 15 14 13 12 11 VCC Q7 D7 D6 Q6 Q5 Q0 D0 D1 Q1 Q2 D2 D3 Q3 D0 D1 D2 D3 D4 3 4 7 8 13 14 17 18 1D 2 5 6 9 12 15 16 19 Q0 Q1 Q2 Q3 Q4 Q5 Q6 Q7 D5 D4 Q4 CK D5 D6 D7 GND 10 Truth Table Inputs OE Outputs D X X L H Z Qn L H CK X H L L L X: Don't care Z: High impedance Qn : No change System Diagram D0 3 D D1 4 D D2 7 D D3 8 D D4 13 D D5 14 D D6 17 D D7 18 D 11 CK CK Q CK Q CK Q CK Q CK Q CK Q CK Q CK Q 1 OE 2 Q0 5 Q1 6 Q2 9 Q3 12 Q4 15 Q5 16 Q6 19 Q7 2000-07-04 2/7 TC7MZ374FK Maximum Ratings Characteristics Supply voltage range DC input voltage DC output voltage Input diode current Output diode current DC output current Power dissipation DC VCC/ground current Storage temperature Symbol VCC VIN VOUT IIK IOK IOUT PD ICC/IGND Tstg Rating -0.5~7.0 -0.5~7.0 -0.5~7.0 (Note1) Unit V V V mA (Note3) mA mA mW mA C -0.5~VCC + 0.5 (Note2) -50 50 50 180 100 -65~150 Note1: Output in off-state Note2: High or low state. IOUT absolute maximum rating must be observed. Note3: VOUT < GND, VOUT > VCC: Recommended Operating Conditions Characteristics Supply voltage Input voltage Output voltage Symbol VCC VIN VOUT Rating 2.0~3.6 1.5~3.6 0~5.5 0~5.5 0~VCC 24 12 -40~85 0~10 (Note9) (Note5) (Note6) (Note7) (Note8) C ns/V mA (Note4) V V Unit V Output current Operating temperature Input rise and fall time IOH/IOL Topr dt/dv Note4: Data retention only Note5: Output in off state Note6: High or low state Note7: VCC = 3.0~3.6 V Note8: VCC = 2.7~3.0 V Note9: VIN = 0.8~2.0 V, VCC = 3.0 V 2000-07-04 3/7 TC7MZ374FK Electrical Characteristics DC Characteristics (Ta = -40~85C) Characteristics High level Low level Symbol VIH VIL Test Condition VCC (V) Input voltage IOH = -100 A High level VOH VIN = VIH or VIL IOH = -12 mA IOH = -18 mA Output voltage IOH = -24 mA IOL = 100 A Low level VOL VIN = VIH or VIL IOL = 12 mA IOL = 16 mA IOL = 24 mA Input leakage current 3-state output off-state current Power off leakage current Quiescent supply current Increase in ICC per input IIN IOZ IOFF ICC ICC VIN = 0~5.5 V VIN = VIH or VIL VOUT = 0~5.5 V VIN/VOUT = 5.5 V VIN = VCC or GND VIN/VOUT = 3.6~5.5 V VIH = VCC - 0.6 V 2.7~3.6 2.7~3.6 2.7~3.6 2.7 3.0 3.0 2.7~3.6 2.7 3.0 3.0 2.7~3.6 2.7~3.6 0 2.7~3.6 2.7~3.6 2.7~3.6 2.0 VCC - 0.2 2.2 2.4 2.2 0.8 0.2 0.4 0.4 0.55 5.0 5.0 10.0 10.0 10.0 500 A A A A V V Min Max Unit AC Characteristics (Ta = -40~85C) Characteristics Symbol Test Condition VCC (V) Maximum clock frequency fmax tpLH tpHL Output enable time tpZL tpZH Output disable time tpLZ tpHZ Minimum pulse width (CK) tw (H) tw (L) Minimum set-up time ts Figure 1, Figure 2 Figure 1, Figure 2 Figure 1, Figure 3 Figure 1, Figure 3 Figure 1, Figure 2 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 2.7 3.3 0.3 (Note10) 2.7 3.3 0.3 150 1.5 1.5 1.5 4.0 3.3 2.5 2.5 1.5 1.5 9.5 8.5 9.5 8.5 8.5 7.5 1.0 ns ns ns ns Min Max Unit Propagation delay time (CK-Q) Figure 1, Figure 2 ns ns Minimum hold time th tosLH tosHL Figure 1, Figure 2 ns Output to output skew ns Note10: This parameter is guaranteed by design. (tosLH = |tpLHm - tpLHn|, tosHL = |tpHLm - tpHLn|) 2000-07-04 4/7 TC7MZ374FK Dynamic Switching Characteristics (Ta = 25C, Input: tr = tf = 2.5 ns, CL = 50 pF, RL = 500 ) Characteristics Quiet output maximum dynamic Quiet output minimum dynamic VOL VOL Symbol VOLP |VOLV| Test Condition VCC (V) VIH = 3.3 V, VIL = 0 V VIH = 3.3 V, VIL = 0 V 3.3 3.3 0.8 0.8 V V Typ. Unit Capacitive Characteristics (Ta = 25C) Characteristics Input capacitance Output capacitance Power dissipation capacitance Symbol CIN COUT CPD fIN = 10 MHz Test Condition VCC (V) (Note11) 3.3 3.3 3.3 7 8 25 pF pF pF Typ. Unit Note11: CPD is defined as the value of the internal equivalent capacitance which is calculated from the operating current consumption. Average operating current can be obtained by the equation: ICC (opr) = CPD VCC fIN + ICC/8 (per bit) 2000-07-04 5/7 TC7MZ374FK AC Test Circuit Open 6.0 V GND Measure CL RL CL = 50 pF RL = 500 Switch RL Parameter tpLH, tpHL tpLZ, tpZL tpHZ, tpZH tw, ts, th, fmax Switch Open 6.0 V GND Open Output Figure 1 AC Waveform tr 2.5 ns tf 2.5 ns Input (CK) 90% 1.5 V 10% tr Input (D) 2.5 ns 90% 1.5 V 10% ts (H) th (H) ts (L) th (L) tf 2.5 ns tw (H) tw (L) 2.7 V 2.7 V GND GND VOH Output (Q) 1.5 V tpHL tpLH VOL Figure 2 tpLH, tpHL, tw, ts, th tr Output Enable ( OE ) 2.5 ns tf 90% 1.5 V 2.5 ns 2.7 V 10% GND tpLZ Output (Q) Low to Off to Low tpHZ tpZL 3.0 V 1.5 V VOL + 0.3 V VOH - 0.3 V 1.5 V GND tpZH VOL VOH Output (Q) High to Off to High Outputs enabled Outputs disabled Outputs enabled Figure 3 tpLZ, tpHZ, tpZL, tpZH 2000-07-04 6/7 TC7MZ374FK Package Dimensions Weight: 0.03 g (typ.) 2000-07-04 7/7 |
Price & Availability of EA09316
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |