View EA09975_983143.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

TLP260J
Tentative
TOSHIBA Photocoupler GaAs IRED&Photo-triac
TLP260J
Triac Drive Programmable Controllers AC-Output Module Solid State Relay
Unit in mm
The TOSHIBA TLP260J is a photocoupler housed in a mini-flat package and consists of a phototriac which is optically coupled to a gallium arsenide infrared-emitting diode. This type of photocoupler is suitable for use in hybrid ICs as it is thinner and smaller than a 6-pin DIP photocoupler. TLP260J: 4-pin mini-flat package (MFSOP6)
* * * *
Peak OFF-state voltage: 600 V (min) Trigger LED current: 10 mA (max) ON-state current: 70 mA (max) Isolation voltage: 3000 Vrms (min) TOSHIBA
Pin Configuration (top view)
Weight: 0.09 g
1
6
3
4
1: ANODE 3: CATHODE 4: TERMINAL1 6: TERMINAL2
980910EBC1
* TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. * Gallium arsenide (GaAs) is a substance used in the products described in this document. GaAs dust and fumes are toxic. Do not break, cut or pulverize the product, or use chemicals to dissolve them. When disposing of the products, follow the appropriate regulations. Do not dispose of the products with other industrial waste or with domestic garbage. * The products described in this document are subject to the foreign exchange and foreign trade laws. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. * The information contained herein is subject to change without notice.
2000-05-10
1/3
TLP260J
Maximum Ratings (Ta = 25C)
Characteristics Forward current Forward current derating (Ta > 53C) = LED Peak forward current (100 s pulse, 100 pps) Reverse voltage Junction temperature OFF-state output terminal voltage ON-state RMS current Detector Ta = 25C Ta = 70C Symbol IF IF/C IFP VR Tj VDRM IT (RMS) IT/C ITP ITSM Tj Tstg Topr Tsol (Note1) BVS Rating 50 -0.7 1 5 125 600 70 40 -0.67 2 1.2 100 -55~125 -40~100 260 3000 mA/C A A C C C C Vrms Unit mA mA/C A V C V mA
ON-state current derating (Ta > 25C) = Peak ON-state current (100 s pulse, 120 pps) Peak nonrepetitive surge current (PW = 10 ms, DC = 10%) Junction temperature
Storage temperature range Operating temperature range Lead soldering temperature (10 s) Isolation voltage (AC, 1 min, RH < 60%) =
Note1: Pins 1 and 3 shorted together, and pins 4 and 6 shorted together.
Recommended Operating Conditions
Characteristics Supply voltage Forward current Peak ON-state current Operating temperature Symbol VAC IF ITP Topr Min 15 -25 Typ. 20 Max 240 25 1 85 Unit Vac mA A C
2000-05-10
2/3
TLP260J
Individual Electrical Characteristics (Ta = 25C)
Characteristics Forward voltage LED Reverse current Capacitance Peak OFF-state current Peak ON-state voltage Detector Holding current Critical rate of rise of OFF-state voltage Critical rate of rise of commutating voltage Symbol VF IR CT IDRM VTM IH dv/dt dv/dt (c) Test Condition IF = 10 mA VR = 5 V V = 0, f = 1 MHz VDRM = 600 V ITM = 70 mA Vin = 240 V, Ta = 85C (Note2) Min 1.0 Typ. 1.15 30 10 1.7 1.0 500 0.2 Max 1.3 10 1000 2.8 Unit V A pF nA V mA V/s V/s
Vin = 60 Vrms, IT = 15 mA (Note2)
Coupled Electrical Characteristics (Ta = 25C)
Characteristics Trigger LED current Capacitance input to output Isolation resistance Symbol IFT CS RS VT = 6 V VS = 0, f = 1 MHz VS = 500 V, RH < 60% = AC, 1 min. Isolation voltage BVS AC, 1 s, in oil DC, 1 min., in oil Turn-on time tON VD = 6 4 V, RL = 100 , IF = Rated IFT x 1.5 Test Condition Min 5 x 10
10
Typ. 0.8 10
14
Max 10 100
Unit mA pF Vrms Vdc s
3000
5000 5000 30
Note2: dv/dt test circuit
+ VCC -
Rin 1 120
6
Vin
5 V, VCC 0V
RL 3 4 4 k
dv/dt (c)
dv/dt
2000-05-10
3/3

▲Up To Search▲

Price & Availability of EA09975

	To Download EA09975 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .