View MIP0222SY_991349.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Intelligent Power Devices (IPDs)
MIP0221SY, MIP0222SY, MIP0223SY, MIP0224SY, MIP0225SY, MIP0226SY, MIP0227SY
Silicon MOS IC
s Features
q Single chip IC with high breakdown voltage power MOS FET and CMOS control circuits q Allowing to input worldwide mains (AC 85 to 274V) q A pulse-by-pulse overcurrent protection circuit and a timer autorestart circuit are integrated.
unit: mm
10.50.5 4.50.2
2.80.2 1.50.2
9.50.2 8.00.2
6.80.1
1.40.1
q Switching power supply (to 90W) q AC adaptor q Battery charger
15.40.3 4.20.3
3.70.1
1.40.1
13.50.5 Solder Dip
2.50.2
Parameter Drain voltage Control voltage
Symbol VD VC
Ratings 700 8 MIP0221SY 0.3
Unit V V
2.540.3 5.080.5
9.3
s Absolute Maximum Ratings (Ta = 25 3C)
0.80.1
0.60.1
MIP0222SY 0.585 MIP0223SY 1.15 Output current ID MIP0224SY 1.72 MIP0225SY MIP0226SY MIP0227SY Control current Channel temperature Storage temperature IC Tch Tstg 0.1 150 -55 to +150 2.4 2.9 3.5 mA C C A
1
2
3
1: Control 2: Source 3: Drain EIAJ: SC-46 TO-220 Type Package (a)
s Block Diagram
Auto-restart Control pin Shunt regulator + 5.7V 4.7V Shutdown/Auto-restart Power supply for internal circuit 1/2 1/2 Auto-restart current-source 1/2
Drain pin
+ -
Ron X ID Timer auto-restart circuit + Power MOS FET Q
PWM control current
Thermal shutdown circuit
S Restarting trigger circuit R
Q
Max Duty Clock Sawtooth + S R Q Q Leading edge blanking
RE
Low pass filter
Minimum ON-time delay circuit Source pin
2.80.2
s Applications
1
Intelligent Power Devices (IPDs)
s Electrical Characteristics (TC = 25 2C)
Parameter Output frequency Control functions Maximum duty cycle Minimum duty cycle Control pin charging current Auto-restart threshold voltage Auto-restart Lockout threshold voltage Auto-restart hysteresis voltage Auto-restart duty cycle Auto-restart frequency MIP0221SY MIP0222SY Self-protection current limit Circuit protection MIP0223SY MIP0224SY ILIMIT MIP0225SY MIP0226SY MIP0227SY Leading edge blanking delay Current limit delay ton(BLK) td(OCL) Symbol fOSC
MIP0221SY/0222SY/0223SY/0224SY/0225SY/0226SY/0227SY
Conditions IC = 2mA
min 90 64
typ 100 67
max Unit 110 70 3 -1.2 kHz % % mA V V V % Hz 9.28 0.55 1.1 1.65 2.2 2.75 3.3 s s 150 4.2 36 18 10 6.7 5 4 3 0.25 mA V s s V C V A
MAXDC IC = 2mA MINDC IC = 10mA IC VC(on) VC(off) VC TSW/TTIM fTIM VC = 0 VC = 5V
-2.4 -1.9 -2 5 4 0.5
-1.5 - 0.8 5.7 4.7 1 5 1.2 6.3 5.3 1.5 8
0.23 0.45 0.9 1.35 1.8 2.25 2.7 IC = 3mA IC = 3mA IC = 3mA ID = 0.025A ID = 0.1A ID = 0.2A ID = 0.3A ID = 0.3A ID = 0.3A ID = 0.3A IDSS VDSS tr tf VD(MIN) VC ICD1 ICD2 IC = 3mA Output MOS FET enabled Output MOS FET disabled 36 5.4 0.7 0.5 VDS = 650V, Output MOS FET disabled ID = 0.25mA, Output MOS FET disabled 700 130 2.3
0.25 0.5 1 1.5 2 2.5 3 0.25 0.1 140 3.3 31.2 15 8.5 5.8 4 3.3 2.6 0.01
Thermal shutdown temperature TOTP Power-up reset threshold voltage VC reset MIP0221SY MIP0222SY MIP0223SY ON-state resistance MIP0224SY RDS(on) MIP0225SY Output MIP0226SY MIP0227SY OFF-state current Breakdown voltage Rise time Fall time Drain supply voltage Power supply voltage Shunt regulator voltage Control supply/discharge current
0.1 0.1
0.2 0.2
5.7 1.4 0.8
6.1 1.8 1.1
V mA mA
2
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technologies described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuit examples of the products. It does not constitute the warranting of industrial property, the granting of relative rights, or the granting of any license. (3) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (4) The products and product specifications described in this material are subject to change without notice for reasons of modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (5) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, redundant design is recommended, so that such equipment may not violate relevant laws or regulations because of the function of our products. (6) When using products for which dry packing is required, observe the conditions (including shelf life and after-unpacking standby time) agreed upon when specification sheets are individually exchanged. (7) No part of this material may be reprinted or reproduced by any means without written permission from our company.
Please read the following notes before using the datasheets
A. These materials are intended as a reference to assist customers with the selection of Panasonic semiconductor products best suited to their applications. Due to modification or other reasons, any information contained in this material, such as available product types, technical data, and so on, is subject to change without notice. Customers are advised to contact our semiconductor sales office and obtain the latest information before starting precise technical research and/or purchasing activities. B. Panasonic is endeavoring to continually improve the quality and reliability of these materials but there is always the possibility that further rectifications will be required in the future. Therefore, Panasonic will not assume any liability for any damages arising from any errors etc. that may appear in this material. C. These materials are solely intended for a customer's individual use. Therefore, without the prior written approval of Panasonic, any other use such as reproducing, selling, or distributing this material to a third party, via the Internet or in any other way, is prohibited.
2001 MAR

▲Up To Search▲

Price & Availability of MIP0222SY

	To Download MIP0222SY Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .