 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| NE5532, NE5532A, SA5532, SA5532A DUAL LOW NOISE OPERATIONAL AMPLIFIERS SLOS075H - NOVEMBER 1979 - REVISED MAY 2004 D Equivalent Input Noise Voltage D D D D D D 5 nV/Hz Typ at 1 kHz Unity-Gain Bandwidth . . . 10 MHz Typ Common-Mode Rejection Ratio . . . 100 dB Typ High dc Voltage Gain . . . 100 V/mV Typ Peak-to-Peak Output Voltage Swing 32 V Typ With VCC = 18 V and RL = 600 High Slew Rate . . . 9 V/s Typ Wide Supply-Voltage Range . . . 3 V to 20 V NE5532, NE5532A . . . D, P, OR PS PACKAGE SA5532, SA5532A . . . D OR P PACKAGE (TOP VIEW) 1OUT 1IN- 1IN+ VCC- 1 2 3 4 8 7 6 5 VCC+ 2OUT 2IN- 2IN+ description/ordering information The NE5532, NE5532A, SA5532, and SA5532A are high-performance operational amplifiers combining excellent dc and ac characteristics. They feature very low noise, high output-drive capability, high unity-gain and maximum-output-swing bandwidths, low distortion, high slew rate, input-protection diodes, and output short-circuit protection. These operational amplifiers are compensated internally for unity-gain operation. These devices have specified maximum limits for equivalent input noise voltage. ORDERING INFORMATION TA PDIP - P PACKAGE Tube of 50 Tube of 75 Reel of 2500 0C to 70C SOIC - D Tube of 75 Reel of 2500 SOP - PS PDIP - P -40C to 85C SOIC - D Reel of 2000 Tube of 50 Tube of 75 Reel of 2500 Tube of 75 Reel of 2500 ORDERABLE PART NUMBER NE5532P NE5532AP NE5532D NE5532DR NE5532AD NE5532ADR NE5532PSR NE5532APSR SA5532P SA5532AP SA5532D SA5532DR SA5532AD SA5532ADR SA5532 SA5532A N5532A N5532 N5532A SA5532P SA5532AP N5532 TOP-SIDE MARKING NE5532P NE5532AP Package drawings, standard packing quantities, thermal data, symbolization, and PCB design guidelines are available at www.ti.com/sc/package. Please be aware that an important notice concerning availability, standard warranty, and use in critical applications of Texas Instruments semiconductor products and disclaimers thereto appears at the end of this data sheet. PRODUCTION DATA information is current as of publication date. Products conform to specifications per the terms of Texas Instruments standard warranty. Production processing does not necessarily include testing of all parameters. Copyright 2004, Texas Instruments Incorporated POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 1 NE5532, NE5532A, SA5532, SA5532A DUAL LOW NOISE OPERATIONAL AMPLIFIERS SLOS075H - NOVEMBER 1979 - REVISED MAY 2004 schematic (each amplifier) VCC+ 36 pF IN+ 37 pF 14 pF 15 OUT 7 pF 15 IN- 460 VCC- Component values shown are nominal. absolute maximum ratings over operating free-air temperature range (unless otherwise noted) Supply voltage (see Note 1): VCC+ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 V VCC- . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -22 V Input voltage, either input (see Notes 1 and 2) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . VCC Input current (see Note 3) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 mA Duration of output short circuit (see Note 4) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Unlimited Package thermal impedance, JA (see Notes 5 and 6): D package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97C/W P package . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85C/W PS package . . . . . . . . . . . . . . . . . . . . . . . . . . . 95C/W Operating virtual junction temperature, TJ . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150C Storage temperature range, Tstg . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . -65C to 150C Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability. NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between VCC+ and VCC-. 2. The magnitude of the input voltage must never exceed the magnitude of the supply voltage. 3. Excessive input current will flow if a differential input voltage in excess of approximately 0.6 V is applied between the inputs, unless some limiting resistance is used. 4. The output may be shorted to ground or either power supply. Temperature and/or supply voltages must be limited to ensure the maximum dissipation rating is not exceeded. 5. Maximum power dissipation is a function of TJ(max), JA, and TA. The maximum allowable power dissipation at any allowable ambient temperature is PD = (TJ(max) - TA)/JA. Operating at the absolute maximum TJ of 150C can affect reliability. 6. The package thermal impedance is calculated in accordance with JESD 51-7. 2 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 NE5532, NE5532A, SA5532, SA5532A DUAL LOW NOISE OPERATIONAL AMPLIFIERS SLOS075H - NOVEMBER 1979 - REVISED MAY 2004 recommended operating conditions MIN VCC+ VCC- TA Supply voltage Supply voltage NE5532, NE5532A Operating free-air temperature range SA5532, SA5532A 5 -5 0 -40 MAX 15 -15 70 85 UNIT V V C electrical characteristics, VCC = +15 V, TA = 25C (unless otherwise noted) PARAMETER TEST CONDITIONS TA = 25C TA = Full range NE5532, NE5532A SA5532, SA5532A MIN VIO IIO IIB VICR VOPP Input offset voltage Input offset current Input bias current Common-mode input-voltage range Maximum peak-to-peak output-voltage swing RL 600 RL 600 , VO = 10 V RL 2 k, VO = 10 V f = 10 kHz RL = 600 RL = 600 , AVD = 30 dB, VIC = VICR min VO = 10 V VCC = 18 V, CL = 100 pF 30 RL = 600 , f = 10 kHz 70 VO = 0 80 10 VO = 0, V01 = 10 V peak, No load f = 1 kHz VCC = 15 V VCC = 18 V TA = 25C TA = Full range TA = 25C TA = Full range VO = 0 TA = 25C TA = Full range TA = 25C TA = Full range 12 24 30 15 10 25 15 2.2 140 VO = 14 V 100 10 300 0.3 100 100 38 8 110 60 16 kHz MHz k dB dB mA mA dB V/mV 100 V/mV TYP 0.5 10 200 13 26 32 50 V MAX 4 5 150 200 800 1000 nA V nA mV UNIT AVD Large-signal differential-voltage amplification Avd BOM B1 ri zo CMRR kSVR IOS ICC Small-signal differential-voltage amplification Maximum-output-swing bandwidth Unity-gain bandwidth Input resistance Output impedance Common-mode rejection ratio Supply-voltage rejection ratio (VCC/VIO) Output short-circuit current Total supply curent Crosstalk attenuation (VO1/VO2) VCC = 9 V to 15 V, All characteristics are measured under open-loop conditions, with zero common-mode input voltage, unless otherwise specified. Full temperature ranges are: - 40C to 85C for the SA5532 and SA5532A, and 0C to 70C for the NE5532 and NE5532A. POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 3 NE5532, NE5532A, SA5532, SA5532A DUAL LOW NOISE OPERATIONAL AMPLIFIERS SLOS075H - NOVEMBER 1979 - REVISED MAY 2004 operating characteristics, VCC = 15 V, TA = 25C NE5532, SA5532 PARAMETER SR Slew rate at unity gain Overshoot factor Vn In Equivalent input noise voltage Equivalent input noise current VI = 100 mV, RL = 600 , f = 30 Hz f = 1 kHz f = 30 Hz f = 1 kHz AVD = 1, CL = 100 pF TEST CONDITIONS MIN TYP 9 10 8 5 2.7 0.7 MAX NE5532A, SA5532A MIN TYP 9 10 8 5 2.7 0.7 pA/Hz 10 6 nV/Hz MAX UNIT V/s % 4 POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 PACKAGE OPTION ADDENDUM www.ti.com 18-Feb-2005 PACKAGING INFORMATION Orderable Device NE5532AD NE5532ADR NE5532AIP NE5532AP NE5532APSR NE5532D NE5532DR NE5532IP NE5532P NE5532PSR SA5532AD SA5532ADR SA5532AP SA5532D SA5532DR SA5532P (1) Status (1) ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE OBSOLETE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE ACTIVE Package Type SOIC SOIC PDIP PDIP SO SOIC SOIC PDIP PDIP SO SOIC SOIC PDIP SOIC SOIC PDIP Package Drawing D D P P PS D D P P PS D D P D D P Pins Package Eco Plan (2) Qty 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 8 50 2000 75 2500 50 75 2500 50 50 2000 75 2500 75 2500 Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) None Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Pb-Free (RoHS) Lead/Ball Finish CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU Call TI CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU CU NIPDAU MSL Peak Temp (3) Level-2-250C-1 YEAR Level-2-250C-1 YEAR Call TI Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-250C-1 YEAR Level-2-250C-1 YEAR Call TI Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-NC-NC-NC Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-2-260C-1 YEAR/ Level-1-235C-UNLIM Level-NC-NC-NC The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - May not be currently available - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. None: Not yet available Lead (Pb-Free). Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Green (RoHS & no Sb/Br): TI defines "Green" to mean "Pb-Free" and in addition, uses package materials that do not contain halogens, including bromine (Br) or antimony (Sb) above 0.1% of total product weight. (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDECindustry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is Addendum-Page 1 PACKAGE OPTION ADDENDUM www.ti.com 18-Feb-2005 provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 MECHANICAL DATA MPDI001A - JANUARY 1995 - REVISED JUNE 1999 P (R-PDIP-T8) 0.400 (10,60) 0.355 (9,02) 8 5 PLASTIC DUAL-IN-LINE 0.260 (6,60) 0.240 (6,10) 1 4 0.070 (1,78) MAX 0.325 (8,26) 0.300 (7,62) 0.015 (0,38) 0.200 (5,08) MAX Seating Plane 0.125 (3,18) MIN 0.010 (0,25) NOM Gage Plane 0.020 (0,51) MIN 0.100 (2,54) 0.021 (0,53) 0.015 (0,38) 0.010 (0,25) M 0.430 (10,92) MAX 4040082/D 05/98 NOTES: A. All linear dimensions are in inches (millimeters). B. This drawing is subject to change without notice. C. Falls within JEDEC MS-001 For the latest package information, go to http://www.ti.com/sc/docs/package/pkg_info.htm POST OFFICE BOX 655303 * DALLAS, TEXAS 75265 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, modifications, enhancements, improvements, and other changes to its products and services at any time and to discontinue any product or service without notice. Customers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All products are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its hardware products to the specifications applicable at the time of sale in accordance with TI's standard warranty. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by government requirements, testing of all parameters of each product is not necessarily performed. TI assumes no liability for applications assistance or customer product design. Customers are responsible for their products and applications using TI components. To minimize the risks associated with customer products and applications, customers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any TI patent right, copyright, mask work right, or other TI intellectual property right relating to any combination, machine, or process in which TI products or services are used. Information published by TI regarding third-party products or services does not constitute a license from TI to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. Reproduction of this information with alteration is an unfair and deceptive business practice. TI is not responsible or liable for such altered documentation. Resale of TI products or services with statements different from or beyond the parameters stated by TI for that product or service voids all express and any implied warranties for the associated TI product or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Following are URLs where you can obtain information on other Texas Instruments products and application solutions: Products Amplifiers Data Converters DSP Interface Logic Power Mgmt Microcontrollers amplifier.ti.com dataconverter.ti.com dsp.ti.com interface.ti.com logic.ti.com power.ti.com microcontroller.ti.com Applications Audio Automotive Broadband Digital Control Military Optical Networking Security Telephony Video & Imaging Wireless Mailing Address: Texas Instruments Post Office Box 655303 Dallas, Texas 75265 Copyright 2005, Texas Instruments Incorporated www.ti.com/audio www.ti.com/automotive www.ti.com/broadband www.ti.com/digitalcontrol www.ti.com/military www.ti.com/opticalnetwork www.ti.com/security www.ti.com/telephony www.ti.com/video www.ti.com/wireless WWW..COM Copyright (c) Each Manufacturing Company. All Datasheets cannot be modified without permission. This datasheet has been download from : www..com 100% Free DataSheet Search Site. Free Download. No Register. Fast Search System. www..com |
Price & Availability of NE5532AP
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |