View NSC05222_994192.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MICROCIRCUIT DATA SHEET MNCLC520A-X REV 0A0
Original Creation Date: 08/04/98 Last Update Date: 04/27/99 Last Major Revision Date: 08/04/98
AMPLIFIER WITH VOLTAGE CONTROLLED GAIN, AGC+AMP
General Description
The CLC520 is a wideband DC-coupled amplifier with voltage-controlled gain (AGC). The amplifier has a high-impedance differential signal input, a high-bandwidth gain control input and a single-ended voltage output. Signal channel performance is outstanding with 160MHz small signal bandwidth, 0.5 degree linear phase deviation (to 60MHz) and 0.04% signal nonlinearity at 4Vpp output. Gain-control is very flexible. Maximum gain may be set over a nominal range of 2 to 100 with one external resistor. In addition, the gain-control input provides more than 40dB of voltage-controlled gain adjustment from the maximum gain setting. For example, a CLC520 may be set for a maximum gain of 2 (or 6dB) for a voltage-controlled gain range from 6dB to less than -34dB. Alternatively, the CLC520 could be set for a maximum gain of 100 (40dB) for a voltage-controlled gain range from 40dB to less than 0dB. Besides being flexible, the gain-control is easy to use. Gain-control bandwidth is superb, 100MHz, simplifying AGC/ALC loop stabilization. Since the gain is minimum with a zero volt input and maximum with a +2 volt input, driving the control input is simple.
Industry Part Number
CLC520A
NS Part Numbers
CLC520AJ-QML
Prime Die
UB1278A
Controlling Document
5962-9169401MCA
Processing
MIL-STD-883, Method 5004
Subgrp Description
1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at
Temp ( oC)
+25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55
Quality Conformance Inspection
MIL-STD-883, Method 5005
1
MNCLC520A-X REV 0A0
MICROCIRCUIT DATA SHEET
Features
160MHz, -3dB bandwidth 2000V/usec slew rate 0.04% signal nonlinearity at 4Vpp output -43dB feedthrough at 30MHz User adjustable gain range Differential voltage input and single-ended voltage output
Applications
Wide-bandwidth AGC systems Automatic signal-leveling Video signal processing Voltage controlled filters Differential amplifier Amplitude modulation
2
MNCLC520A-X REV 0A0
MICROCIRCUIT DATA SHEET
(Absolute Maximum Ratings)
(Note 1) Supply Voltage (V+) +7V dc Output Current (Iout) 70mA Common Mode Input Voltage (Vcm) V+ Differential Input Voltage 10V Gain Controlled Input Voltage V+ Referenced Input Voltage (Vref) V+ Maximum Power Dissipation (Pd) (Note 2) 1.2W Junction Temperature (Tj) +175 C Storage Temperature Range -65 C to +150 C Lead Temperature (soldering, 10 seconds) +300 C Thermal Resistance Junction -to-ambient (ThetaJA) Ceramic DIP (Still Air) (500 LFPM) Junction -to-case (ThetaJC) Ceramic DIP Package Weight (Typical) Ceramic DIP ESD Tolerance (Note 3) ESD Rating Note 1:
98 C/W 63 C/W 23 C/W
2160 mg
500 V
Note 2:
Note 3:
Absolute Maximum Ratings are limits beyond which damage to the device may occur. Operating Ratings are conditions for which the device is functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Some performance characteristics may degrade when the device is not operated under the listed test conditions. The maximum power dissipation must be derated at elevated temperatures and is dictated by Tjmax (maximum junction temperature), ThetaJA (package junction to ambient thermal resistance), and TA (ambient temperature). The maximum allowable power dissipation at any temperature is Pdmax = (Tjmax - TA) / ThetaJA or the number given in the Absolute Maximum Ratings, whichever is lower. Human body model, 100 pF discharged through 1.5K Ohms.
3
MNCLC520A-X REV 0A0
MICROCIRCUIT DATA SHEET
Recommended Operating Conditions
Supply Voltage (V+) +5V dc Gain Range (Av) +2 to +100 Reference Input Voltage (Vref) +150mV Ambient Operating Temperature Range (Ta) -55 C to +125 C
4
MNCLC520A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS: Static and DC Characteristics
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: V+ = +5V dc, Av = +10, load resistance (Rl) = 100 Ohms, feedback resistance (Rf) = 1 KOhms, and gain setting resistance (Rg) = 182 Ohms. -55 C < Ta < +125 C. (Note 3). SYMBOL +Iin PARAMETER Input Bias Current (noninverting) Input Bias Current (inverting) Output Offset Voltage Average +Input Bias Current Drift Average -Input Bias Current Drift Average Output Offset Voltage Drift Output Voltage Swing Output Voltage Swing Quiescent Supply Current Power Supply Sensitivity Gain Controlled Input Voltage Common Mode Rejection Ratio Input Offset Current Average Input Offset Current Drift Gain Accuracy Av = 20dB, Rf = 1KOhms, Rg = 182Ohms Vcm = 1.0V No Load 1 1 1 1 1 1 1 1 -Vo No Load 1 1 Icc PSS Vg CMRR Iio No Load V+ = +4.5V to +5.0V, V- = -4.5V to -5.0V, output referred dc 1 1 1 1 TC (Iio) 1 1 1 1 SGNL Integral Signal Nonlineraity Vout = 4Vpp 1 1 -0.5 -1.0 0 59 2 4 20 40 +0.5 +1.0 0.1 0.2 CONDITIONS NOTES PINNAME MIN -28 -61 -28 -61 -120 -150 TC (+Iin) -165 -415 -165 -415 -300 -400 +3.2 +3.0 -3.2 -3.0 38 -31 2 MAX +28 +61 +28 +61 +120 +150 +165 +415 +165 +415 +300 +400 UNIT uA uA uA uA mV mV SUBGROUPS 1, 2 3 1, 2 3 1 2, 3
-Iin
Voo
nA/C 2 nA/C 3 nA/C 2 nA/C 3 uV/C 2 uV/C 3 V V V V mA dB V dB uA uA 1 2, 3 1 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2, 3 1, 2 3
TC (-Iin)
TC (Voo)
+Vo
uA/C 2 uA/C 3 dB dB % % 1, 2 3 1, 3 2
GACCU
5
MNCLC520A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
DC PARAMETERS: Static and DC Characteristics (Continued)
(The following conditions apply to all the following parameters, unless otherwise specified.) DC: V+ = +5V dc, Av = +10, load resistance (Rl) = 100 Ohms, feedback resistance (Rf) = 1 KOhms, and gain setting resistance (Rg) = 182 Ohms. -55 C < Ta < +125 C. (Note 3). SYMBOL +Vdm PARAMETER Differential Voltage Range Differential Voltage Range Signal Input Resistance Signal Input Capacitance Gain Controlled Input Resistance Gain Controlled Input Capacitance Common Mode Voltage Range Common Mode Voltage Range Output Current No Load Rg = 182Ohms CONDITIONS NOTES 1 1 -Vdm Rg = 182Ohms 1 1 Rin 1 1 Cin Rinc 1 1 1 Cinc +Vcm 1 1 1 -Vcm No Load 1 1 +Iout 1 1 -Iout Output Current 1 1 Rout Output Impedance At dc 1 1 +50 +30 -50 -30 0.2 0.3 +2 +1.4 -2 -1.4 600 535 2 100 50 2 PINNAME MIN +250 +210 -250 -210 MAX UNIT mV mV mV mV SUBGROUPS 1, 3 2 1, 3 2
KOhms 1, 2 KOhms 3 pF 1, 2, 3
Ohms 1, 2 Ohms 3 pF V V V V mA mA mA mA 1, 2, 3 1, 2 3 1, 2 3 1, 2 3 1, 2 3
Ohms 1, 2 Ohms 3
6
MNCLC520A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC PARAMETERS: Frequency Domain Response
(The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vs = +5V dc, gain setting voltage (Vg) = +1.1V, Av = 10V/V, load resistance (Rl) = 100 Ohms, feedback resistance (Rf) = 1 KOhms, and gain setting resistance (Rg) = 182 Ohms -55 C < Ta < +125 C (Note 3). SYMBOL GFPL PARAMETER Gain Flatness Peaking Low Gain Flatness Peaking High Gain Flatness Rolloff CONDITIONS 0.1MHz to 30MHz, Vout < 0.5 Vpp 2 GFPH 0.1MHz to 200MHz, Vout < 0.5 Vpp 2 GFR 0.1MHz to 30MHz, Vout < 0.5 Vpp 2 0.1MHz to 60MHz, Vout < 0.5 Vpp 2 SSBW Small Signal Bandwidth -3dB bandwidth, Vout < 0.5Vpp 2 2 LSBW Large Signal Bandwidth Gain Control Channel Small Signal Bandwidth Linear Phase Deviation -3dB bandwidth, Vout < 4Vpp 1 1 SBWC -3dB bandwidth, Vout < 0.5Vpp, Vin = +0.2V, Vg = +1V dc 0.1MHz to 60MHz 1 120 120 110 100 85 80 NOTES PINNAME MIN MAX 0.3 0.4 0.5 0.7 0.3 0.4 1.0 1.3 UNIT dB dB dB dB dB dB dB dB MHz MHz MHz MHz MHz MHz SUBGROUPS 4 5, 6 4 5, 6 4 5, 6 4 5, 6 4 5 6 4, 5 6 4, 5, 6 4
LPD
1 1
1 1.2 -35
Deg
Degre 5, 6 es dB 4, 5, 6
FDTH
Feedthrough
Vin = -22dBm at 30MHz, Vg = 0V
1
7
MNCLC520A-X REV 0A0
MICROCIRCUIT DATA SHEET
Electrical Characteristics
AC PARAMETERS: Time Domain Response
(The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vs = +5V dc, gain setting voltage (Vg) = +1.1V, Av = 10V/V, load resistance (Rl) = 100 Ohms, feedback resistance (Rf) = 1 KOhms, and gain setting resistance (Rg) = 182 Ohms -55 C < Ta < +125 C (Note 3) . SYMBOL HD2 PARAMETER 2nd Harmonic Distortion 2 VPP, 20MHz 2 2 HD3 3rd Harmonic Distortion 2 VPP, 20MHz 2 2 SNF Equivalent Output Noise Floor 0.1MHz to 200MHz 1 1 INV Equivalent Output Integrated Noise Rise and Fall Time Rise and Fall Time Settling Time Overshoot Slew Rate Slew Rate Note 1: Note 2: Note 3: 1MHz to 200MHz 1 1 TRS 0.5V step, Cl < 10pF, measured between 10% and 90% 4V step, Cl < 10pF, measured between 90% and 10% 2V step at 0.1% of the final value, Cl < 10pF 0.5V step, Cl < 10pF Rising Edge, measured at +1V with 4V step, Cl < 10pF Falling Edge, measured at +1V with 4V step, Cl < 10pF 1 1 TRL tS OS +SR -SR 1 1 1 1 1 1450 1450 CONDITIONS NOTES PINNAME MIN MAX -40 -35 -40 -50 -45 -50 -130 -129 1000 1100 3 3.7 5 18 15 UNIT dBc dBc dBc dBc dBc dBc SUBGROUPS 4 5 6 4 5 6
dBm/H 4, 6 z dBm/H 5 z uV uV ns ns ns ns % 4, 6 5 9, 10 11 9, 10, 11 9, 10, 11 9, 10, 11
V/us 9, 10, 11 V/us 9, 10, 11
If not tested, shall be guaranteed to the limits specified in table I herein. Group A testing only. The algebraic convention, whereby the most negative value is a minimum and most positive is a maximum, is used in this table. Negative current shall be defined as convential current flow out of a device terminal.
8
MNCLC520A-X REV 0A0
MICROCIRCUIT DATA SHEET
Graphics and Diagrams
GRAPHICS# 07079HRA2 J14ARH P000403A CERDIP (J), 14 LEAD (B/I CKT) CERDIP (J), 14 LEAD (P/P DWG) CERDIP (J),14 LEAD (PINOUT) DESCRIPTION
See attached graphics following this page.
9
+VCC Vg +VIN +Rg -Rg -VIN -VCC
1 2 3 4 5 6 7
14 13 12 11 10 9 8
+VCC N/C IGND VOUT VREF -VCC
CLC520J 14 - LEAD DIP CONNECTION DIAGRAM TOP VIEW P000403A
N
MIL/AEROSPACE OPERATIONS 2900 SEMICONDUCTOR DRIVE SANTA CLARA, CA 95050
MNCLC520A-X REV 0A0
MICROCIRCUIT DATA SHEET
Revision History
Rev
0A0
ECN #
Rel Date
Originator
Shaw Mead
Changes
Initial MDS Release
M0003379 04/27/99
10

▲Up To Search▲

Price & Availability of NSC05222

	To Download NSC05222 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .