 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MICROCIRCUIT DATA SHEET MDLM117HV-H REV 0A0 Original Creation Date: 06/27/95 Last Update Date: 09/18/95 Last Major Revision Date: 06/27/95 POSITIVE THREE TERMINAL HIGH VOLTAGE ADJUSTABLE REGULATOR General Description The LM117HV adjustable 3-terminal positive voltage regulator is capable of supplying in excess of 0.5A over a 1.2V to 57V output range. It is exceptionally easy to use and requires only two external resistors to set the output voltage. Further, both line and load regulation are are better than standard fixed regulators. In addition to higher performance than fixed regulators, the LM117HV offers full overload protection available only in IC's. Included on the chip are current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional even if the adjustment terminal is disconnected. Normally, no capacitors are needed unless the device is situated more than 6 inches from the input filter capacitors in which case an input bypass is needed. An optional output capacitor can be added to improve transient response. The adjustment terminal can be bypassed to achieve very high ripple rejection ratios which are difficult to achieve with standard 3-terminal regulators. Besides replacing fixed regulators, the LM117HV is useful in a wide variety of other applications. Since the regulator is "floating" and sees only the input-to-output differential voltage, supplies of several hundred volts can be regulated as long as the maximum input to output differential is not exceeded, (i.e. do not short the output to ground). Also, it makes an especially simple adjustable switching regulator, a programmable output regulator, or by connecting a fixed resistor between the adjustment and output, the LM117HV can be used as a precision current regulator. Supplies with electronic shutdown can be achieved by clamping the adjustment terminal to ground which programs the output to 1.2V where most loads draw little current. Industry Part Number LM117HVH NS Part Numbers LM117HVH-SMD Prime Die LM117HVH Controlling Document DESC.# 7703402XA Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MDLM117HV-H REV 0A0 MICROCIRCUIT DATA SHEET Features Adjustable output down to 1.2V. Guaranteed 0.5A output current. Line regulation typically 0.01%/V. Load regulation typically 0.1%. Current limit constant with temperature. Eliminates the need to stock many voltages. 80 dB ripple rejection. Output is short-circuit protected. 2 MDLM117HV-H REV 0A0 MICROCIRCUIT DATA SHEET (Absolute Maximum Ratings) (Note 1) Power Dissipation Internally Limited Input-Output Voltage Differential +60V, -0.3V Maximum Junction Temperature 150 C Storage Temperature Range -65 C to +150 C Lead Temperature (Soldering, 10 seconds) 300 C Thermal Resistance ThetaJA (Still Air) (500LF/Min Air flow) ThetaJC ESD Tolerance (Note 2) 186 C/W 64 C/W 21 C/W 2000V Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating Ratings indicate conditions for which the device is intended to be functional, but do not guarantee specific performance limits. For guaranteed specifications and test conditions, see the Electrical Characteristics. The guaranteed specifications apply only for the test conditions listed. Human body model, 1.5K Ohms in series with 100pF. Note 2: Recommended Operating Conditions Operating Temperature Range -55 C < TA < +125 C 3 MDLM117HV-H REV 0A0 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Il = 8mA SYMBOL Vref PARAMETER Reference Voltage Vdiff = 3V Vdiff = 40V Vdiff = 60V Vdiff = 3.3V Rline Line Regulation 3V < Vdiff < 40V, Vout = Vref 40V < Vdiff < 60V, Vout = Vref 40V < Vdiff < 60V, Vout = Vref 3V < Vdiff < 60V 3V < Vdiff < 60V 3.3V < Vdiff < 40V, Vout = Vref Rload Load Regulation Vdiff = 3V, 10mA < Il < 500mA Vdiff = 40V, 10mA < Il < 150mA Vdiff = 60V, 10mA < Il < 20mA Vdiff = 3.3V, 10mA < Il < 500mA Vdiff = 40V, 10mA < Il < 100mA Vrth Iadj Thermal Regulation Adjustment Pin Current Vin = 14.6V, Il = 300mA, Pd = 4W, t = 20mS Vdiff = 3V Vdiff = 40V Vdiff = 60V Vdiff = 3.3V Delta Iadj Adjustment Pin Current Change Vdiff = 3V, 10mA < Il < 500mA Vdiff = 40V, 10mA < Il < 150mA 3V < Vdiff < 40V 3.3V < Vdiff < 60V Vdiff = 3.3V, 10mA < Il < 500mA Vdiff = 40V, 10mA < Il < 100mA 3.3V < Vdiff < 40V -5 -5 -5 -5 -5 -5 -5 CONDITIONS NOTES PINNAME MIN 1.2 1.2 1.2 1.2 -9 -5 -10 -14 -33 -23 -15 -15 -15 -15 -15 -3.1 MAX 1.3 1.3 1.3 1.3 9 5 10 14 33 23 15 15 15 15 15 3.1 100 100 100 100 5 5 5 5 5 5 5 UNIT V V V V mV mV mV mV mV mV mV mV mV mV mV mV uA uA uA uA uA uA uA uA uA uA uA SUBGROUPS 1 1, 2, 3 1, 2, 3 2, 3 1 1 2, 3 1 2, 3 2, 3 1 1 1, 2, 3 2, 3 2, 3 1 1 1, 2, 3 1, 2, 3 2, 3 1 1 1 1, 2, 3 2, 3 2, 3 2, 3 4 MDLM117HV-H REV 0A0 MICROCIRCUIT DATA SHEET Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Il = 8mA SYMBOL Ilmin PARAMETER Minimum Load Current CONDITIONS Vdiff = 3V, Vout = 1.4V (forced) Vdiff = 40V, Vout = 1.4V (forced) Vdiff = 60V, Vout = 1.4V (forced) Vdiff = 3.3V, Vout = 1.4V (forced) Icl Current Limit Vdiff = 5V Vdiff = 40V Vdiff = 60V .5 .15 .02 NOTES PINNAME MIN 5 5 7 5 1.65 .65 .28 MAX UNIT mA mA mA mA A A A SUBGROUPS 1 1, 2, 3 1, 2, 3 2, 3 1, 2, 3 1 1 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Il = 8mA Rn Ripple Rejection Note 1: f = 120Hz, Vout = Vref, Cadj = 10uF, Iout = 100mA 1 66 dB 4, 5, 6 Group "A" sample only, test at all temperature. 5 MDLM117HV-H REV 0A0 MICROCIRCUIT DATA SHEET Graphics and Diagrams GRAPHICS# 9784HRB1 H03ARD DESCRIPTION 3LD .200 DIA P.C. METAL CAN PKG (B/I CKT) 3LD .200 DIA P.C. METAL CAN PKG (P/P DWG) See attached graphics following this page. 6 |
Price & Availability of NSC05313
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |