 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MILITARY DATA SHEET MNLM6181AM-X REV 0A0 Original Creation Date: 09/05/95 Last Update Date: 09/18/95 Last Major Revision Date: 09/05/95 100mA, 100MHz Current Feedback Amplifier General Description The LM6181 current-feedback amplifier offers an unparalleled combination of bandwidth, slew-rate and output current. The amplifier can directly drive up to 100pF capacitive loads without oscillating and a 10V signal into a 50 Ohm or 75 Ohm back-terminated coax cable system over the full military temperature range. This represents a radical enhancement in output drive capability for an 8-pin high-speed amplifier making it ideal for video applications. Built on National's advanced high-speed VIP(TM) II (Vertically Integrated PNP) process, the LM6181's dynamic performance makes it ideal for data acquisition, high speed ATE, and precision pulse amplifier applications. Industry Part Number LM6181AM NS Part Numbers LM6181AMJ/883 Prime Die LM6181 Controlling Document 5962-9081802MPA Processing MIL-STD-883, Method 5004 Subgrp Description 1 2 3 4 5 6 7 8A 8B 9 10 11 Static tests at Static tests at Static tests at Dynamic tests at Dynamic tests at Dynamic tests at Functional tests at Functional tests at Functional tests at Switching tests at Switching tests at Switching tests at Temp ( oC) +25 +125 -55 +25 +125 -55 +25 +125 -55 +25 +125 -55 Quality Conformance Inspection MIL-STD-883, Method 5005 1 MNLM6181AM-X REV 0A0 MILITARY DATA SHEET (Absolute Maximum Ratings) (Note 1) Supply Voltage +18V Differential Input Voltage +6V Input Voltage +Supply Voltage Inverting Input Current 15mA Soldering Information Soldering (10 sec.) Output Short Circuit (Note 2) Storage Temperature Range -65 C < TA < +150 C Maximum Junction Temperature 150 C Thermal Resistance ThetaJA (Still Air) (500LF/Min Air flow) ThetaJC ESD Rating (Note 3) 260 C 115 C/W 57 C/W 18.1 C/W +3500V Note 1: Absolute Maximum Ratings indicate limits beyond which damage to the device may occur. Operating ratings indicate conditions the device is intended to be functional, but device parameter specifications may not be guaranteed under these conditions. For guaranteed specifications and test conditions, see the Electrical Characteristics. Continuous short circuit operation at elevated ambient temperature can result in exceeding the maximum allowed junction temperature of 150 C. Output currents in excess of +130mA over a long term basis may adversely affect reliability. Human body model 100pF and 1.5K Ohms. Note 2: Note 3: Recommended Operating Conditions Supply Voltage Range 7V to 32V Junction Temperature Range -55 C < TA < +125 C 2 MNLM6181AM-X REV 0A0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Rl = 1K Ohm SYMBOL Vio PARAMETER Input Offset Voltage Vcc = +5V Vcc = +5V -Iib Inverting Input Bias Current Vcc = +5V Vcc = +5V +Iib Non-Inverting Input Bias Current Vcc = +5V -Iib PSRR Inverting Input Bias Current Power Supply Rejection +4.5V < Vcc < +16V +4.5V < Vcc < +16V +4.0V < Vcc < +6.0V +4.0V < Vcc < +6.0V +Iib PSRR Non-Inverting Input Bias Current Power Supply Rejection +4.5V < Vcc < +16V +4.5V < Vcc < +16V +4.0V < Vcc < +6.0V +4.0V < Vcc < +6.0V -Iib CMRR Inverting Input Bias Current Common Mode Rejection -10V <= Vcm <= +10V CONDITIONS NOTES PINNAME MIN MAX 3.0 5.0 2.0 3.0 5.0 20.0 10.0 22.0 1.5 3.0 1.5 0.5 3.0 0.5 0.6 0.5 1.5 0.5 0.6 0.5 0.75 -2.5V <= Vcm <= +2.5V 0.5 1.0 +Iib CMRR Non-Inverting Input Bias Current Common Mode Rejection -10V <= Vcm <= +10V -2.5V <= Vcm <= +2.5V 0.5 0.5 1.0 CMRR Common Mode Rejection Ratio -10V <= Vcm <= +10V -2.5V <= Vcm <= +2.5V 50.0 50.0 47.0 UNIT mV mV mV mV uA uA uA uA uA uA uA SUBGROUPS 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1 2, 3 1, 2, 3 uA/V 1 uA/V 2, 3 uA/V 1 uA/V 2, 3 uA/V 1 uA/V 2, 3 uA/V 1 uA/V 2, 3 uA/V 1 uA/V 2, 3 uA/V 1 uA/V 2, 3 uA/V 1, 2, 3 uA/V 1 uA/V 2, 3 dB dB dB 1, 2, 3 1 2, 3 3 MNLM6181AM-X REV 0A0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Rl = 1K Ohm SYMBOL PSRR PARAMETER Power Supply Rejection Ratio CONDITIONS +4.5V < Vcc < +16V +4.0V < Vcc < +6.0V Rin Non-Inverting Input Resistance Vcc = +5V Vcc = +5V Isc Output Short Circuit Current Vout to Rail, Rl = 10 Ohms to Ground 1 1 Vcc = +5V, Vout to Rail, Rl = 10 Ohms to Ground Vcc = +5V, Vout to Rail, Rl = 10 Ohms to Ground Zt Transimpedance 1 1 NOTES PINNAME MIN 70.0 70.0 1.0 0.5 1.0 0.5 100.0 75.0 75.0 70.0 1.0 0.6 Rl = 100 Ohms 0.8 0.5 Vcc = +5V Vcc = +5V Vcc = +5V, Rl = 100 Ohms Vcc = +5V, Rl = 100 Ohms Icc Supply Current No Load, Vin = 0V Vcc = +5V, No Load, Vin = 0V Vop Output Voltage Swing Rl = 100 Ohm 11.00 10.00 7.20 Vcc = +5V Vcc = +5V Vcc = +5V, Rl = 100 Ohms 2.25 2.20 2.00 0.75 0.5 0.5 0.23 10.0 8.5 MAX UNIT dB dB SUBGROUPS 1, 2, 3 1, 2, 3 MOhm 1 MOhm 2, 3 MOhm 1 MOhm 2, 3 mA mA mA mA 1 2, 3 1 2, 3 MOhm 1 MOhm 2, 3 MOhm 1 Mohm 2, 3 MOhm 1 MOhm 2, 3 MOhm 1 MOhm 2, 3 mA mA V V V V V V 1, 2, 3 1, 2, 3 4, 5, 6 4 5, 6 4 5, 6 4, 5, 6 4 MNLM6181AM-X REV 0A0 MILITARY DATA SHEET Electrical Characteristics DC PARAMETERS(Continued) (The following conditions apply to all the following parameters, unless otherwise specified.) DC: Vcc = +15V, Rl = 1K Ohm SYMBOL Avol PARAMETER Gain Rl = 100 Ohm CONDITIONS NOTES PINNAME MIN 50 40 25 Vcc = +5V Vcc = +5V Vcc = +5V, Rl = 100 Ohms Vcc = +5V, Rl = 100 Ohms Vcm Input Common Mode Voltage Range Vcc = +5V 2 2 30 15 20 7.5 -10 -2.5 10 2.5 MAX UNIT K K K K K K K V V SUBGROUPS 4, 5, 6 4 5, 6 4 5, 6 4 5, 6 4, 5, 6 4, 5, 6 AC PARAMETERS (The following conditions apply to all the following parameters, unless otherwise specified.) AC: Vcc = +15V, Rl = 1K Ohm Bw Closed Loop Bandwidth -3 dB Avs = -1 75 65 Avs = -10 Vcc = +5V, Avs = -1 Vcc = +5V, Avs = -10 Sr Slew Rate Avs = -1, Vo = + 10V Vcc = +5V, Avs = -1, Vo = +2V tS Settling Time (0.1%) Avs = -1V, Vo = +5V, Rl = 150 Ohm Avs = -1V, Vo = +5V, Rl = 150 Ohm Vcc = +5V, Avs = -1V, Vo = +2V, Rl = 150 Ohm Vcc = +5V, Avs = -1V, Vo = +2V, Rl = 150 Ohm 3 3 35 30 20 1000 375 85 115 85 125 MHz MHz MHz MHz MHz 7 8, 8A 7, 8, 8A 7, 8, 8A 7, 8, 8A V/uS 7, 8, 8A V/uS 7, 8, 8A nS nS nS nS 7 8, 8A 7 8, 8A Graphics and Diagrams GRAPHICS# See attached graphics following this page. DESCRIPTION 5 MNLM6181AM-X REV 0A0 MILITARY DATA SHEET Graphics and Diagrams GRAPHICS# 6278HRA2 J08ARL P000105A (Continued) DESCRIPTION CERDIP (J), 8 LEAD (B/I CKT) CERDIP (J), 8 LEAD (P/P DWG) CERDIP (J), 8 LEAD (PIN OUT) See attached graphics following this page. 6 |
Price & Availability of NSC05538
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |