View ON0692_995360.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

MC10EP101
Product Preview
Quad 4-Input OR/NOR
The MC10EP101 is a Quad 4-input OR/NOR gate. The device is functionally equivalent to the E101. With AC performance much faster than the E101 device, the EP101 is ideal for applications requiring the fastest AC performance available. All VCC and VEE pins must be externally connected to power supply to guarantee proper operation.
http://onsemi.com
* * * * * * * * *
240ps Typical Propagation Delay High Bandwidth to 3 Ghz Typical PECL mode: 3.0V to 5.5V VCC with VEE = 0V ECL mode: 0V VCC with VEE = -3.0V to -5.5V 75k Internal Input Pulldown Resistors ESD Protection: >2KV HBM, >100V MM Moisture Sensitivity Level 2 For Additional Information, See Application Note AND8003/D Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 Transistor Count = 173 devices
LOGIC DIAGRAM
D0a D0b D0c D0d D1a D1b D1c D1d Q1 Q1
32-LEAD TQFP FA SUFFIX CASE 873A
MARKING DIAGRAM*
MC10 EP101 AWLYYWW 32 1
A WL YY WW
= Assembly Location = Wafer Lot = Year = Work Week
*For additional information, see Application Note AND8002/D Q0 Q0
PIN DESCRIPTION
PIN D0a-D3d Q0-Q3, Q0-Q3 VCC VBB VEE FUNCTION ECL Data Inputs ECL Data Outputs Positive Supply Reference Voltage Output Negative, 0 Supply
TRUTH TABLE
D2a D2b D2c D2d D3a D3b D3c D3d Q2 Q2 Dna L H X X X H Dnb L X H X X H Dnc L X X H X H Dnd L X X X H H Qn L H H H H H Qn H L L L L L
Q3 Q3
ORDERING INFORMATION
Device MC10EP101FA
This document contains information on a product under development. ON Semiconductor reserves the right to change or discontinue this product without notice.
Package TQFP TQFP
Shipping 250 Units/Tray 2000 Tape & Reel
MC10EP101FAR2
(c) Semiconductor Components Industries, LLC, 1999
1
December, 1999 - Rev. 0
Publication Order Number: MC10EP101/D
MC10EP101
D0d D1a D1b D1c D1d D2a D2b D2c
24 D0c D0b D0a VEE Q0 Q0 VCC VCC 25 26 27 28
23
22
21
20
19
18
17 16 15 14 13 D2d D3a D3b VCC D3c D3d VEE NC
MC10EP101
29 30 31 32 1 2 3 4 5 6 7 8 12 11 10 9
VCC Q1
Q1
Q2
Q2
Q3
Q3 VCC
Figure 1. 32-Lead TQFP Pinout (Top View)
Warning: All VCC and VEE pins must be externally connected to Power Supply to guarantee proper operation.
MAXIMUM RATINGS*
Symbol VEE VCC VI VI Iout TA Tstg JA JC Tsol Power Supply (VCC = 0V) Power Supply (VEE = 0V) Input Voltage (VCC = 0V, VI not more negative than VEE) Input Voltage (VEE = 0V, VI not more positive than VCC) Output Current Operating Temperature Range Storage Temperature Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Solder Temperature (<2 to 3 Seconds: 245C desired) Still Air 500lfpm Continuous Surge Parameter Value -6.0 to 0 6.0 to 0 -6.0 to 0 6.0 to 0 50 100 -40 to +85 -65 to +150 80 55 12 to 17 265 Unit VDC VDC VDC VDC mA C C C/W C/W C
* Maximum Ratings are those values beyond which damage to the device may occur.
http://onsemi.com
2
MC10EP101
DC CHARACTERISTICS, ECL/LVECL (VCC = 0V, VEE = -5.5V to -3.0V) (Note 3.)
-40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current (Note 1.) Output HIGH Voltage (Note 2.) Output LOW Voltage (Note 2.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Input HIGH Current -1135 -1935 -1210 -1935 -1060 -1810 -885 -1685 -885 -1610 150 -1070 -1870 -1145 -1870 Min Typ Max Min 25C Typ 60 -945 -1745 -820 -1620 -820 -1545 150 -1010 -1810 -1085 -1810 -885 -1685 -760 -1560 -760 -1485 150 Max Min 85C Typ Max Unit mA mV mV mV mV A
IIL Input LOW Current -150 -150 -150 A NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 1. VCC = 0V, VEE = VEEmin to VEEmax, all other pins floating. 2. All loading with 50 ohms to VCC -2.0 volts. 3. Input and output parameters vary 1:1 with VCC.
DC CHARACTERISTICS, LVPECL (VCC = 3.3V 0.3V, VEE = 0V) (Note 6.)
-40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current (Note 4.) Output HIGH Voltage (Note 5.) Output LOW Voltage (Note 5.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Input HIGH Current 2165 1365 2090 1365 2240 1490 2415 1615 2415 1690 150 2230 1430 2155 1430 Min Typ Max Min 25C Typ 60 2355 1555 2480 1680 2480 1755 150 2290 1490 2215 1490 2415 1615 2540 1740 2540 1815 150 Max Min 85C Typ Max Unit mA mV mV mV mV A
IIL Input LOW Current -150 -150 -150 A NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 4. VCC = 3.0V, VEE = 0V, all other pins floating. 5. All loading with 50 ohms to VCC -2.0 volts. 6. Input and output parameters vary 1:1 with VCC.
http://onsemi.com
3
MC10EP101
DC CHARACTERISTICS, PECL (VCC = 5.0V 0.5V, VEE = 0V) (Note 9.)
-40C Symbol IEE VOH VOL VIH VIL IIH Characteristic Power Supply Current (Note 7.) Output HIGH Voltage (Note 8.) Output LOW Voltage (Note 8.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Input HIGH Current 3865 3065 3790 3065 3940 3190 4115 3315 4115 3390 150 3930 3130 3855 3130 Min Typ Max Min 25C Typ 60 4055 3255 4180 3380 4180 3455 150 3990 3190 3915 3190 4115 3315 4240 3440 4240 3515 150 Max Min 85C Typ Max Unit mA mV mV mV mV A
IIL Input LOW Current -150 -150 -150 A NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 7. VCC = 5.0V, VEE = 0V, all other pins floating. 8. All loading with 50 ohms to VCC -2.0 volts. 9. Input and output parameters vary 1:1 with VCC.
AC CHARACTERISTICS (VCC = 3.0V to 5.5V; VEE = 0V) or (VCC = 0V; VEE = -3.0V to -5.5V)
-40C Symbol fmax tPLH, tPHL tSKEW tJITTER tr tf Characteristic Maximum Toggle Frequency (Note 10.) Propagation Delay Device Skew Part-to-Part (Note 11.) Cycle-to-Cycle Jitter Output Rise and Fall Times (20% - 80%) Q, Q D ->Q, Q Q, Q Min Typ 3.0 225 TBD TBD TBD Max Min 25C Typ 3.0 240 TBD TBD TBD 200 135 Max Min 85C Typ 3.0 250 TBD TBD TBD 150 Max Unit GHz ps ps ps ps
10. Fmax guaranteed for functionality only. 11. Skew is measured between outputs under identical transitions.
http://onsemi.com
4
MC10EP101
PACKAGE DIMENSIONS
TQFP FA SUFFIX 32-LEAD PLASTIC PACKAGE CASE 873A-02 ISSUE A
A A1
32 25 4X
0.20 (0.008) AB T-U Z
1
-T- B B1
8
-U- V P DETAIL Y
17
AE
V1 AE DETAIL Y
9
-Z- 9 S1 S
4X
0.20 (0.008) AC T-U Z
G -AB-
SEATING PLANE
DETAIL AD
-AC-
BASE METAL
N
F
8X
D
M_ R
0.20 (0.008)
M
AC T-U Z
0.10 (0.004) AC
NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETER. 3. DATUM PLANE -AB- IS LOCATED AT BOTTOM OF LEAD AND IS COINCIDENT WITH THE LEAD WHERE THE LEAD EXITS THE PLASTIC BODY AT THE BOTTOM OF THE PARTING LINE. 4. DATUMS -T-, -U-, AND -Z- TO BE DETERMINED AT DATUM PLANE -AB-. 5. DIMENSIONS S AND V TO BE DETERMINED AT SEATING PLANE -AC-. 6. DIMENSIONS A AND B DO NOT INCLUDE MOLD PROTRUSION. ALLOWABLE PROTRUSION IS 0.250 (0.010) PER SIDE. DIMENSIONS A AND B DO INCLUDE MOLD MISMATCH AND ARE DETERMINED AT DATUM PLANE -AB-. 7. DIMENSION D DOES NOT INCLUDE DAMBAR PROTRUSION. DAMBAR PROTRUSION SHALL NOT CAUSE THE D DIMENSION TO EXCEED 0.520 (0.020). 8. MINIMUM SOLDER PLATE THICKNESS SHALL BE 0.0076 (0.0003). 9. EXACT SHAPE OF EACH CORNER MAY VARY FROM DEPICTION. MILLIMETERS MIN MAX 7.000 BSC 3.500 BSC 7.000 BSC 3.500 BSC 1.400 1.600 0.300 0.450 1.350 1.450 0.300 0.400 0.800 BSC 0.050 0.150 0.090 0.200 0.500 0.700 12_ REF 0.090 0.160 0.400 BSC 1_ 5_ 0.150 0.250 9.000 BSC 4.500 BSC 9.000 BSC 4.500 BSC 0.200 REF 1.000 REF INCHES MIN MAX 0.276 BSC 0.138 BSC 0.276 BSC 0.138 BSC 0.055 0.063 0.012 0.018 0.053 0.057 0.012 0.016 0.031 BSC 0.002 0.006 0.004 0.008 0.020 0.028 12_ REF 0.004 0.006 0.016 BSC 1_ 5_ 0.006 0.010 0.354 BSC 0.177 BSC 0.354 BSC 0.177 BSC 0.008 REF 0.039 REF
J
CE
SECTION AE-AE
X DETAIL AD
GAUGE PLANE
http://onsemi.com
5
0.250 (0.010)
H
W
K
Q_
DIM A A1 B B1 C D E F G H J K M N P Q R S S1 V V1 W X
-T-, -U-, -Z-
EE EE EE EE
MC10EP101
Notes
http://onsemi.com
6
MC10EP101
Notes
http://onsemi.com
7
MC10EP101
ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer.
PUBLICATION ORDERING INFORMATION
North America Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 2:30pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 2:30pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 1:30pm to 5:00pm UK Time) Email: ONlit@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong 800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5740-2745 Email: r14525@onsemi.com Fax Response Line: 303-675-2167 800-344-3810 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative.
http://onsemi.com
8
MC10EP101/D

▲Up To Search▲

Price & Availability of ON0692

	To Download ON0692 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .