Part Number Hot Search : 
1N2494 TLE4484 BDW54C 16LV4 AC244028 MA4X726 5RF20 3266P504
Product Description
Full Text Search
 

To Download ON1062 Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
 Order this document by MC33468/D
Variable Frequency Micropower DC-to-DC Converter
The MC33468 is a micropower step-up switching voltage regulator, specifically designed for handheld and pager applications, to provide a regulated output voltage using a minimum of external parts. This device features a quiescent bias current of 3.0 A typical. The MC33468 features a highly accurate voltage reference, an error amplifier, an oscillator, a variable frequency modulation (VFM) controller, a drive pin (EXT) for an external transistor, and feedback resistors. The Vout pin is fixed at 2V in the IC. The output of the converter with an inductor, a diode, a capacitor, a drive transistor, and feed-back resistors can have an output of 30V.
MC33468
VARIABLE FREQUENCY MICROPOWER DC-to-DC CONVERTER
SEMICONDUCTOR TECHNICAL DATA
MC33468 Features: * Low Quiescent Bias Current of 3.0 A
* * * *
High Output Voltage Accuracy of 2.5% Low Startup Voltage of 0.8 V at No Load Output Voltage Set With External Resistors Surface Mount Package
N SUFFIX PLASTIC PACKAGE CASE 1212 (SOT-23-5)
1 5
ORDERING INFORMATION
Device MC33468SN-20ATR Output Voltage 2.0 Operating Temperature Range TA = -40 to +85C Package (Tape/Reel) SOT-23-5 (Tape)
PIN DESCRIPTION
AAAAAAAAAAAAAA A AAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAA AAAAAAAA A AAAAAAAAAAAAAAAAAAAAA AAAAAAAA A AAAAAAAAAAAAAAAAAAAAA AA
1 2 3 4 5 GND VDD EXT NC Ground Input External Transistor Drive No Connection VOUT Voltage Output Pin (Fixed at 2V)
Pin No.
Symbol
Description
PIN CONNECTIONS
Ground Vdd EXT 1 2 3 (Top View) 4 N/C 5 VOUT
Representative Block Diagram
2 VDD 3 EXT Oscillator Drive
5 VOUT
Vref
1
Gnd
(c) Motorola, Inc. 1999 Rev 0, 08/1999
MOTOROLA ANALOG IC DEVICE DATA
1
MC33468
MAXIMUM RATINGS (TC = 25C, unless otherwise noted.)
VOUT , OUTPUT VOLTAGE (V)
30
EFFICIENCY
AA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A AAA A A A A AAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A A A A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A AAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AA A A A A AAAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAA A AAA A AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAAAAAAAAAAA AAA A
AAA A AA AAAAAAAAAAAAAAAAAAAAAAAAA A AA AAA A AA AAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAA AA AAA A AA AAAAAAAAAAAAAAAAAAAAAAAAA A AA AAA A AA AAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAA A AA AAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAAAAA AAAAAAAAAAAAAAAAAAAAAAA AA AAAAAAAAAAAAAAAAAAAAAAAAA A AA
Power Supply Voltage (Transient) VDD VDD 12 10 V V V Power Supply Voltage (Operating) External Pin Voltage VEXT IEXT -0.3 to VDD + 0.3 50/50 EXT Pin Source/Sink Current mA Power Dissipation and Thermal Characteristics N Suffix, Plastic Package Case 1212 (SOT-23-5) Maximum Power Dissipation @ TA = 250C Thermal Resistance, Junction-to-Air Operating Junction Temperature Operating Ambient Temperature Storage Temperature Range PD RJA TJ TA 150 667 125 mW C/W C C C -40 to +85 Tstg -55 to +125
Rating
Symbol
Value
Unit
ELECTRICAL CHARACTERISTICS (VDD = 1.9 V, TA = 25C, unless otherwise noted.)
Characteristic Symbol OSCILLATOR Frequency fosc
Min
Typ
Max
Unit
- -
180 0.7 75
-
kHz V
Oscillator Minimum Supply Voltage (IO = 0 mA) Oscillator Duty Cycle
VDD D
0.8 -
65
%
EXT OUTPUT
ON State Source Current (VEXT = GND) OFF State Sink Current (VEXT = 1.9 V) Output Voltage
Isource Isink VOUT IQ IQ
1.5 1.5
- -
- -
mA mA
TOTAL DEVICE
1.950 - -
2.000 15 3.0
2.050 25 5.0
V
Quiescent Bias Current (VOUT = 1.9 V, IO = 0 mA) Quiescent Bias Current (VOUT = 2.1 V, IO = 0 mA)
A A
Figure 1. Output Voltage versus Output Current
40 Vin = 3.6 V 35 60 50 40 25 30 20 20 80 70
Figure 2. Efficiency versus Output Current
Vin = 3.6 V 0 20 40 60
0
20
40
60
IOUT, OUTPUT CURRENT (mA)
IOUT, OUTPUT CURRENT (mA)
2
MOTOROLA ANALOG IC DEVICE DATA
MC33468
DEFINITIONS
Quiescent Bias Current - Current which is used to operate the switching regulator chip and is not delivered to the load. Leakage Current - Current drawn through a transistor junction, under a specified collector voltage, when the transistor is off. on-time of the transistor switch. During the off-time of the transistor switch, the inductor current ramps down to zero and remains at zero until another switching cycle begins. Since the VDD pin is connected to the input no external startup circuit is needed. Oscillator The oscillator frequency, is internally programmed to 180 kHz. The duty ratio of the oscillator is designed for a constant value of 0.75 nominal. Hence the nominal on-time of the power switch is: 0.75 D ton s f osc (180 kHz)
FUNCTIONAL DESCRIPTION
Introduction The MC33468 is a monolithic power switching regulator optimized for dc-to-dc converter applications where power drain must be minimized. The MC33468 uses Variable Frequency Modulation to step up the input DC voltage to a higher accurate output voltage. Potential applications include low power consumer products and battery powered portable products. Typical application circuits are shown in Figure 3. Operating Description The MC33468 converter operates as a fixed on-time, variable off-time voltage mode ripple regulator. Operation is intended to be in the discontinuous mode, where the inductor current ramps up to a peak value which is greater than or equal to twice the value of the dc input current during the
+
+
+4.16
Feedback Comparator The output voltage is sensed and fed to a high speed comparator noninverting input through an internal resistive divider. The comparator inverting input is connected to an internally trimmed reference. With a voltage mode ripple converter operating under normal conditions, output switch conduction is initiated and terminated by the oscillator, off-time is controlled by the high speed voltage feedback comparator.
Figure 3. Typical Application
VOUT
VDD VIN EXT Gnd VOUT
Figure 4. Design Equations for Step-Up
Calculation ton L Equation
D f osc
t (n)(Vin) (ton) P
2 (V in
IL(avg) IL(pk) Vripple(pp)
*
O Iin V sat)(t on) L
[
(ton)(I ) O (C ) O
The following converter design characteristics must be chosen: Vin - Nominal Operating dc input voltage VO - Desired dc output voltage IO - Desired dc output current Vripple(pp) - Desired peak-to-peak output ripple voltage. For best performance the ripple voltage should be kept to a low value since it directly affects regulation. Capacitor CO should have a low equivalent series resistance (ESR). NOTE: 1. Vsat - Saturation voltage of the switching transistor. n - Estimated circuit efficiency.
MOTOROLA ANALOG IC DEVICE DATA
3
MC33468
OUTLINE DIMENSIONS
N SUFFIX PLASTIC PACKAGE CASE 1212-01 (SOT-23) ISSUE O
A
D
B
A2 0.05 S
NOTES: 1. DIMENSIONS ARE IN MILLIMETERS. 2. INTERPRET DIMENSIONS AND TOLERANCES PER ASME Y14.5M, 1994. 3. DATUM C IS A SEATING PLANE.
A1 L
DIM A1 A2 B C D E E1 e e1 L L1
E
5 1 2
4 3
E1 L1 e e1 B
5X
C
M
0.10
CB
S
A
S
C
MILLIMETERS MIN MAX 0.00 0.10 1.00 1.30 0.30 0.50 0.10 0.25 2.80 3.00 2.50 3.10 1.50 1.80 0.95 BSC 1.90 BSC 0.20 --- 0.45 0.75
Recommended Footprint for Surface Mount Applications
0.7 MAX.
1.0
2.4
0.95 1.9
0.95 (Unit: mm)
SOT-23-5
Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; Silicon Harbour Centre, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 2, Dai King Street, Tai Po Industrial Estate, Tai Po, N.T., Hong Kong. - http://sps.motorola.com/mfax/ 852-26629298 HOME PAGE: http://motorola.com/sps/ JAPAN: Motorola Japan Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488
4
MC33468/D MOTOROLA ANALOG IC DEVICE DATA


▲Up To Search▲   

 
Price & Availability of ON1062

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X