 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MOTOROLA SEMICONDUCTOR TECHNICAL DATA Order this document by MCR716/D Advance Information Silicon Controlled Rectifiers Reverse Blocking Thyristors * * * * Designed for high volume, low cost, industrial and consumer applications such as motor control, process control, temperature, light and speed control. Small Size Passivated Die for Reliability and Uniformity Low Level Triggering and Holding Characteristics Available in Surface Mount Lead Form -- Case 369A MCR716 MCR718 SCRs 4.0 AMPERES RMS 400 thru 600 VOLTS G A K ORDERING INFORMATION * To Obtain "DPAK" in Surface Mount Leadform (Case 369A): Shipped in 16 mm Tape and Reel -- Add "T4" Suffix to Device Number, i.e., MCR718T4 A K A G CASE 369A-13 STYLE 4 MAXIMUM RATINGS (TJ = 25C unless otherwise noted.) Characteristic Peak Repetitive Off-State Voltage1 Peak Repetitive Reverse Voltage (TJ = -40 to +110C, RGK = 1 KW) On-State RMS Current (All conduction Angles; TC = 90C) Average On-State Current (All conduction Angles; TC = 90C) Peak Non-Repetitive Surge Current (One Half Cycle, 60 Hz, TJ = 110C) Circuit Fusing Consideration (t = 8.3 msec) Peak Gate Power (Pulse Width 10 s, TC = 90C) Average Gate Power (t = 8.3 msec, TC = 90C) Peak Gate Current (Pulse Width 10 s, TC = 90C) Operating Junction Temperature Range Storage Temperature Range Symbol VDRM VRRM MCR716 MCR718 IT(RMS) 4.0 IT(AV) 2.6 ITSM 25 I2t PGM PG(AV) IGM TJ Tstg 2.6 0.5 0.1 0.2 -40 to +110 -40 to +150 A2sec Watt Watt Amp C C Amps Amps 400 600 Amps Value Unit Volts THERMAL CHARACTERISTICS Characteristic Thermal Resistance, Junction to Case Thermal Resistance, Junction to Ambient (Case 369A)(2) Symbol RJC RJA Max 3.0 80 Unit C/W C/W 1..VDRM and VRRM for all types can be applied on a continuous basis. Ratings apply for zero or negative gate voltage; positive gate voltage shall not be applied concurrent with negative potential on the anode. Blocking voltages shall not be tested with a constant current source such that the voltage ratings of the devices are exceeded. 2. Case 369A, when surface mounted on minimum recommended pad size. Motorola Thyristor Device Data (c) Motorola, Inc. 1998 1 MCR716 MCR718 ELECTRICAL CHARACTERISTICS (TC = 25C and RGK = 1 KW unless otherwise noted.) Characteristic Peak Reverse Gate Blocking Voltage (IGR = 10 A) Peak Forward Blocking Current1 Peak Reverse Blocking Current3 (VAK = Rated VDRM or VRRM) Peak Reverse Gate Blocking Current (VGR = 10 V) Peak On-State Voltage2 (ITM = 5.0 A Peak) (ITM = 8.2 A Peak) Gate Trigger Current (Continuous dc)3 (VD = 12 Vdc, RL = 30 Ohms, TC = 25C) (VD = 12 Vdc, RL = 30 Ohms, TC = -40C) Gate Trigger Voltage (Continuous dc)3 (VD = 12 Vdc, RL = 30 Ohms, TC = 25C) (VD = 12 Vdc, RL = 30 Ohms, TC = -40C) (VD = 12 Vdc, RL = 30 Ohms, TC = 110C) Holding Current1 (VD = 12 Vdc, IG = 2.0 mA, IT(init) = 200 mA, TC = 25C) (VD = 12 Vdc, IG = 2.0 mA, IT(init) = 200 mA, TC = -40C) Latching Current1 (VD = 12 Vdc, IG = 2.0 mA, TC = 25C) (VD = 12 Vdc, IG = 2.0 mA, TC = -40C) Symbol VGRM IDRM IRRM TC = 25C TC = 110C IRGM VTM -- -- IGT 1.0 -- VGT 0.3 -- 0.2 IH 0.4 -- IL -- -- -- -- 5.0 10 1.0 -- 5.0 10 mA 0.55 -- -- 0.8 1 -- mA 25 -- 75 300 Volts 1.3 1.5 1.5 2.2 A -- -- -- -- -- -- 10 200 1.2 A Volts Min 10 Typ 12.5 Max 18 Unit Volts A DYNAMIC CHARACTERISTICS Total Turn-On Time (Source Voltage = 12 V, RS = 6 KW, IT = 8 A(pk), RGK = 1 KW) (VD = Rated VDRM, Rise Time = 20 ns, Pulse Width = 10 s) Critical Rate of Rise of Off-State Voltage (VD = 0.67 x Rated VDRM, Exponential Waveform, TJ = 110C) Repetitive Critical Rate of Rise of On-State Current (f = 60 Hz, IPK = 30 A, PW = 100 s, dIG/dt = 1 A/s) tgt -- 2.0 5.0 s dv/dt di/dt 5.0 -- 10 -- -- 100 V/s A/s 1..Ratings apply for negative gate voltage or RGK = 1 KW. Devices shall not have a positive gate voltage concurrently with a negative voltage on the anode. Devices should not be tested with a constant current source for forward and reverse blocking capability such that the voltage applied exceeds the rated blocking voltage. 2..Pulse Test: Pulse Width 2 ms, Duty Cycle 2%. 3..Does not include RGK current. 2 Motorola Thyristor Device Data MCR716 MCR718 TC , MAXIMUM ALLOWABLE CASE TEMPERATURE ( C) P(AV), AVERAGE POWER DISSIPATION (WATTS) 110 5.0 30C 60C 90C 120C 180C 2.0 DC 30C 105 60C 90C 120C 180C DC 100 4.0 3.0 1.0 0 0 1.0 2.0 3.0 4.0 5.0 IT(AV), AVERAGE ON-STATE CURRENT (AMPS) 95 0 1.0 2.0 3.0 4.0 5.0 IT(AV), AVERAGE ON-STATE CURRENT (AMPS) Figure 1. Average Current Derating Figure 2. On-State Power Dissipation IT, INSTANTANEOUS ON-STATE CURRENT (AMPS) Typical @ TJ = 25C Maximum @ TJ = 110C 10 r(t), TRANSIENT RESISTANCE (NORMALIZED) 100 1.0 ZqJC(t) = RqJC(t)*r(t) 0.1 Maximum @ TJ = 25C 1.0 0.1 0.5 1.0 1.5 2.0 2.5 3.0 3.5 4.0 4.5 VT, INSTANTANEOUS ON-STATE VOLTAGE (VOLTS) 0.01 0.1 1.0 10 100 1000 10,000 t, TIME (ms) Figure 3. On-State Characteristics Figure 4. Transient Thermal Response 20 VGT, GATE TRIGGER VOLTAGE (VOLTS) 20 60 80 100 110 I GT, GATE TRIGGER CURRENT ( m A) 1.0 15 10 0.5 5.0 0 -40 0 -20 0 40 -40 -20 0 20 40 60 80 100 110 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Figure 5. Typical Gate Trigger Current versus Junction Temperature Figure 6. Typical Gate Trigger Voltage versus Junction Temperature Motorola Thyristor Device Data 3 MCR716 MCR718 2.0 2.0 IH , HOLDING CURRENT (mA) 1.5 IL , LATCHING CURRENT (mA) -20 0 20 40 60 80 100 110 1.5 1.0 1.0 0.5 0.5 0 -40 0 -40 -20 0 20 40 60 80 100 110 TJ, JUNCTION TEMPERATURE (C) TJ, JUNCTION TEMPERATURE (C) Figure 7. Typical Holding Current versus Junction Temperature Figure 8. Typical Latching Current versus Junction Temperature PACKAGE DIMENSIONS -T- B V R 4 SEATING PLANE C E NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. INCHES MIN MAX 0.235 0.250 0.250 0.265 0.086 0.094 0.027 0.035 0.033 0.040 0.037 0.047 0.180 BSC 0.034 0.040 0.018 0.023 0.102 0.114 0.090 BSC 0.175 0.215 0.020 0.050 0.020 --- 0.030 0.050 0.138 --- MILLIMETERS MIN MAX 5.97 6.35 6.35 6.73 2.19 2.38 0.69 0.88 0.84 1.01 0.94 1.19 4.58 BSC 0.87 1.01 0.46 0.58 2.60 2.89 2.29 BSC 4.45 5.46 0.51 1.27 0.51 --- 0.77 1.27 3.51 --- A S 1 2 3 Z U K F L D G 2 PL J H 0.13 (0.005) T STYLE 4: PIN 1. 2. 3. 4. CATHODE ANODE GATE ANODE M DIM A B C D E F G H J K L R S U V Z CASE 369A-13 ISSUE Z Motorola reserves the right to make changes without further notice to any products herein. Motorola makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does Motorola assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation consequential or incidental damages. "Typical" parameters which may be provided in Motorola data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. Motorola does not convey any license under its patent rights nor the rights of others. Motorola products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the Motorola product could create a situation where personal injury or death may occur. Should Buyer purchase or use Motorola products for any such unintended or unauthorized application, Buyer shall indemnify and hold Motorola and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that Motorola was negligent regarding the design or manufacture of the part. Motorola and are registered trademarks of Motorola, Inc. Motorola, Inc. is an Equal Opportunity/Affirmative Action Employer. Mfax is a trademark of Motorola, Inc. How to reach us: USA / EUROPE / Locations Not Listed: Motorola Literature Distribution; P.O. Box 5405, Denver, Colorado 80217. 1-303-675-2140 or 1-800-441-2447 Customer Focus Center: 1-800-521-6274 MfaxTM: RMFAX0@email.sps.mot.com - TOUCHTONE 1-602-244-6609 ASIA/PACIFIC: Motorola Semiconductors H.K. Ltd.; 8B Tai Ping Industrial Park, Motorola Fax Back System - US & Canada ONLY 1-800-774-1848 51 Ting Kok Road, Tai Po, N.T., Hong Kong. 852-26629298 - http://sps.motorola.com/mfax/ HOME PAGE: http://motorola.com/sps/ JAPAN: Nippon Motorola Ltd.; SPD, Strategic Planning Office, 141, 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan. 81-3-5487-8488 4 Motorola Thyristor Device Data MCR716/D |
Price & Availability of ON1826
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |