![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
MMDL101T1 Schottky Barrier Diode Schottky barrier diodes are designed primarily for high-efficiency UHF and VHF detector applications. Readily available to many other fast switching RF and digital applications. * Very Low Capacitance -- Less than 1.0 pF @ Zero Volts * Low Noise Figure -- 6.0 dB Typ @ 1.0 GHz * Device Marking: 4M http://onsemi.com 1.0 pF SCHOTTKY BARRIER DIODE MAXIMUM RATINGS Symbol VR Reverse Voltage Rating Value 7.0 Unit Vdc 1 THERMAL CHARACTERISTICS Symbol PD Characteristic Total Device Dissipation FR-5 Board,* TA = 25C Derate above 25C Thermal Resistance Junction to Ambient Junction and Storage Temperature Range Max 200 1.57 635 -55 to +150 Unit mW mW/C C/W C 2 PLASTIC SOD-323 CASE 477 RqJA TJ, Tstg *FR-5 Minimum Pad 1 CATHODE 2 ANODE ORDERING INFORMATION Device MMDL101T1 Package SOD-323 Shipping 3000 / Tape & Reel (c) Semiconductor Components Industries, LLC, 2000 1 January, 2000 - Rev. 0 Publication Order Number: MMDL101T1/D MMDL101T1 ELECTRICAL CHARACTERISTICS (TA = 25C unless otherwise noted) Characteristic Reverse Breakdown Voltage (IR = 10 A) Diode Capacitance (VR = 0, f = 1.0 MHZ, Note 1) Reverse Leakage (VR = 3.0 V) Noise Figure (f = 1.0 GHz, Note 2) Forward Voltage (IF = 10 mA) *Notes on Next Page Symbol V(BR)R 7.0 CT -- IR -- NF -- VF -- 0.5 0.6 6.0 -- Vdc 20 250 dB 0.88 1.0 nAdc 10 -- pF Min Typ Max Unit Volts http://onsemi.com 2 MMDL101T1 TYPICAL CHARACTERISTICS 1.0 0.7 0.5 IR, REVERSE LEAKAGE (m A) VR = 3.0 Vdc 0.2 0.1 0.07 0.05 100 IF, FORWARD CURRENT (mA) 10 TA = 85C TA = - 40C 1.0 TA = 25C MMBD110T1 0.02 MMBD110T1 0.01 30 40 50 60 70 80 90 100 110 TA, AMBIENT TEMPERATURE (C) 120 130 0.1 0.3 0.4 0.5 0.6 VF, FORWARD VOLTAGE (VOLTS) 0.7 0.8 Figure 1. Reverse Leakage Figure 2. Forward Voltage 1.0 11 10 NF, NOISE FIGURE (dB) LOCAL OSCILLATOR FREQUENCY = 1.0 GHz (Test Circuit Figure 5) C, CAPACITANCE (pF) 0.9 9 8 7 6 5 4 3 MMBD110T1 2 4.0 1 0.1 0.2 0.8 0.7 MMBD110T1 0.5 1.0 2.0 5.0 PLO, LOCAL OSCILLATOR POWER (mW) 10 0.6 0 1.0 2.0 3.0 VR, REVERSE VOLTAGE (VOLTS) Figure 3. Capacitance Figure 4. Noise Figure LOCAL OSCILLATOR NOTES ON TESTING AND SPECIFICATIONS Note 1 -- CC and CT are measured using a capacitance bridge (Boonton Electronics Model 75A or equivalent). Note 2 -- Noise figure measured with diode under test in tuned diode mount using UHF noise source and local oscillator (LO) frequency of 1.0 GHz. The LO power is adjusted for 1.0 mW. IF amplifier NF = 1.5 dB, f = 30 MHz, see Figure 5. UHF NOISE SOURCE H.P. 349A DIODE IN TUNED MOUNT NOISE FIGURE METER H.P. 342A IF AMPLIFIER NF = 1.5 dB f = 30 MHz Figure 5. Noise Figure Test Circuit http://onsemi.com 3 MMDL101T1 PACKAGE DIMENSIONS K A SOD-323 PLASTIC PACKAGE CASE 477-02 ISSUE A NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: MILLIMETERS. 3. LEAD THICKNESS SPECIFIED PER L/F DRAWING WITH SOLDER PLATING. MILLIMETERS INCHES MIN MAX MIN MAX 1.60 1.80 0.063 0.071 1.15 1.35 0.045 0.053 0.80 1.00 0.031 0.039 0.25 0.40 0.010 0.016 0.15 REF 0.006 REF 0.00 0.10 0.000 0.004 0.089 0.177 0.0035 0.0070 2.30 2.70 0.091 0.106 D 1 2 B DIM A B C D E H J K E C J NOTE 3 H STYLE 1: PIN 1. CATHODE 2. ANODE 0.63 mm 0.025 1.60 mm 0.063 2.85 mm 0.112 mm inches 0.83 mm 0.033 SOD-323 Soldering Footprint ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION North America Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com N. American Technical Support: 800-282-9855 Toll Free USA/Canada EUROPE: LDC for ON Semiconductor - European Support German Phone: (+1) 303-308-7140 (M-F 2:30pm to 5:00pm Munich Time) Email: ONlit-german@hibbertco.com French Phone: (+1) 303-308-7141 (M-F 2:30pm to 5:00pm Toulouse Time) Email: ONlit-french@hibbertco.com English Phone: (+1) 303-308-7142 (M-F 1:30pm to 5:00pm UK Time) Email: ONlit@hibbertco.com ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Toll Free from Hong Kong 800-4422-3781 Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5487-8345 Email: r14153@onsemi.com Fax Response Line: 303-675-2167 800-344-3810 Toll Free USA/Canada ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. http://onsemi.com 4 MMDL101T1/D |
Price & Availability of ON2208
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |