View LAE67B-U2AA-24-1_1013839.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

Power TOPLED(R) Enhanced optical Power LED (HOP2000) LS E67B, LA E67B, LO E67B, LY E67B
Vorlaufige Daten / Preliminary Data
Besondere Merkmale * Gehausetyp: weies P-LCC-4 Gehause * Besonderheit des Bauteils: mehr Licht durch erhohten optischen Wirkungsgrad; hohere Umgebungstemperatur bei gleichem Strom im Vergleich zur TOPLED(R) * Wellenlange: 633 nm (super-rot), 617 nm (amber), 606 nm (orange), 587 nm (gelb) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 24 lm/W (amber, orange, gelb), 18 lm/W (super-rot) * Gruppierungsparameter: Lichtstarke, Durchflussspannung, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8 mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach EOS/ESD-5.1-1993 Anwendungen * Ampelanwendung * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung) * Innen- und Auenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, Blinker, seitl. Begrenzungsleuchten, Bremslichter) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung (z.B. Fluchtwege, u.a.) * Signal- und Symbolleuchten
2003-05-26 1
Features * package: white P-LCC-4 package * feature of the device: more light due to higher optical efficiency, higher ambient temperature at the same current possible compared to TOPLED(R) * wavelength: 633 nm (super-rot), 617 nm (amber), 606 nm (orange), 587 nm (gelb) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 24 lm/W (amber, orange, yellow), 18 lm/W (super-red) * grouping parameter: luminous intensity, forward voltage, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to EOS/ESD-5.1-1993
Applications * traffic lights * backlighting (LCD, switches, keys, displays, illuminated advertising) * interior and exterior automotive lighting (e.g. dashboard backlighting, turn signal lamps, sidemarkers, brake lights) * substitution of micro incandescent lamps * marker lights (e.g. exit ways, etc.) * signal and symbol luminaire
LS E67B, LA E67B, LO E67B, LY E67B
Typ Emissionsfarbe Color of Emission Farbe der Lichtaustrittsflache Color of the Light Emitting Area colorless clear colorless clear colorless clear colorless clear Lichtstarke Lichtstrom Bestellnummer
Type
Luminous Intensity IF = 50 mA IV (mcd) 355 ... 900 560 ... 1400 560 ... 1400 560 ... 1400
Luminous Flux IF = 50 mA V (mlm) 1900 (typ.) 2900 (typ.) 2900 (typ.) 2900 (typ.)
Ordering Code
LS E67B-T2V1-1-1 LA E67B-U2AA-24-1 LO E67B-U2AA-24-1 LY E67B-U2AA-26-1
super-red amber orange yellow
Q65110A0178 Q62703Q5965 Q62703Q6010 Q62703Q6329
Anm.: -1-1 gesamter Farbbereich (siehe Seite 4) -24-1 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) -26-1 gesamter Farbbereich, Lieferung in Einzelgruppen (siehe Seite 5) -24-1 gesamter Durchlassspannungsbereich, Lieferung in Einzelgruppen (siehe Seite 5) -26-1 gesamter Durchlassspannungsbereich, Lieferung in Einzelgruppen (siehe Seite 5) Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe, nur 4 Halbgruppen besteht. Einzelne Halbgruppen sind nicht erhaltlich. In einer Verpackungseinheit / Gurt ist immer nur eine Halbgruppe enthalten. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 Note: -1-1 Total color tolerance range (please see page 4) -24-1 Total color tolerance range, delivery in single groups (please see page 5) -26-1 Total color tolerance range, delivery in single groups (please see page 5) -24-1 Total forward voltage tolerance, delivery in single groups (see page 5) -26-1 Total forward voltage tolerance, delivery in single groups (see page 5) The standard shipping format for serial types includes a group of only 4 individual groups. Individual half groups are not available. No packing unit / tape ever contains more than one luminous intensity half group. Dimming range for direct current mode max. 5:1 die aus
2003-05-26
2
LS E67B, LA E67B, LO E67B, LY E67B
Grenzwerte Maximum Ratings Bezeichnung Parameter Betriebstemperatur Operating temperature range Lagertemperatur Storage temperature range Sperrschichttemperatur Junction temperature Durchlassstrom Forward current Stostrom Surge current t 10 s, D = 0.1 Sperrspannung1) Reverse voltage Leistungsaufnahme Power consumption Symbol Symbol Wert Value - 40 ... + 100 - 40 ... + 100 + 125 70 0.1 Einheit Unit C C C mA A
Top Tstg Tj IF IFM
VR Ptot
12 180
V mW
Warmewiderstand Thermal resistance Sperrschicht/Umgebung Rth JA Junction/ambient Rth JS Sperrschicht/Lotpad Junction/soldering point Montage auf PC-Board FR 4 (Padgroe 16 mm 2) mounted on PC board FR 4 (pad size 16 mm 2)
1)
300 130
K/W K/W
fur kurzzeitigen Betrieb geeignet / suitable for short term application
2003-05-26
3
LS E67B, LA E67B, LO E67B, LY E67B
Kennwerte (TA = 25 C) Characteristics Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 50 mA Dominantwellenlange 1) Dominant wavelength IF = 50 mA Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 50 mA Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV Durchlassspannung 2) Forward voltage IF = 50 mA Sperrstrom Reverse current VR = 12 V Temperaturkoeffizient von peak Temperature coefficient of peak IF = 50 mA; -10C T 100C Temperaturkoeffizient von dom Temperature coefficient of dom IF = 50 mA; -10C T 100C Temperaturkoeffizient von VF Temperature coefficient of VF IF = 50 mA; -10C T 100C Optischer Wirkungsgrad Optical efficiency IF = 50 mA
1)
Symbol Symbol LS (typ.)
Werte Values LA 624 LO 610 LY 594 645
Einheit Unit nm
peak dom
(typ.)
633
6
617
-5/+7
606
-6/+3
587
-7/+8
nm
(typ.)
15
18
16
15
nm
(typ.) (min.) (typ.) (max.) (typ.) (max.) (typ.)
2
120
120
120
120
Grad deg.
VF VF VF IR IR TCpeak
1.9 3) 1.9 4) 1.9 2.2 2.2 2.2 2.5 2.5 2.5 0.01 10 0.15 0.01 10 0.15 0.01 10 0.14
1.9 3) V 2.2 V 2.5 V 0.01 10 0.13
A A
nm/K
(typ.)
TCdom
0.05
0.07
0.08
0.10
nm/K
(typ.)
TCV
- 3.4 - 3.7 - 3.7 - 3.7 mV/K
(typ.)
opt
18
24
24
24
lm/W
Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Durchlassspannungsgruppen werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,05 V ermittelt. Forward voltage groups are tested at a current pulse duration of 1 ms and a tolerance of 0.05 V.
2)
2003-05-26
4
LS E67B, LA E67B, LO E67B, LY E67B
1)
Wellenlangengruppen Wavelength groups amber min. 612 616 620 max. 616 620 624 600 603 606 orange min. max. 603 606 609 580 583 586 589 592 Durchlassspannungsgruppen fur super-rot / orange / gelb Forward voltage groups for super-red / orange / yellow Durchlassspannung Forward voltage min. max. 2.2 2.5 V V 3A 3B 4A 4B 1.9 2.2 Einheit Unit yellow min. max. 583 586 589 592 595
4)
Gruppe Group 2 3 4 5 6
3)
Einheit Unit nm nm nm nm nm Durchlassspannungsgruppen fur amber Forward voltage groups for amber
Gruppe Group
Gruppe Group
Durchlassspannung Forward voltage min. 1.90 2.05 2.20 2.35 max. 2.05 2.20 2.35 2.50
Einheit Unit V V V V
3 4
Helligkeits-Gruppierungsschema Luminous Intensity Groups Lichtgruppe Luminous Intensity Group T2 U1 U2 V1 V2 AA Lichtstarke Luminous Intensity IV (mcd) 355 ... 450 450 ... 560 560 ... 710 710 ... 900 900 ... 1120 1120 ... 1400 Lichtstrom Luminous Flux V (mlm) 1200 1500 1900 2400 3000 3750 (typ.) (typ.) (typ.) (typ.) (typ.) (typ.)
Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11 % ermittelt. Luminous intensity is tested at a current pulse duration of 25 ms and a tolerance of 11 %. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: AA-3-4A Example: AA-3-4A Lichtgruppe Luminous Intensity Group A Halbgruppe Half Group A Wellenlange Wavelength 3 Durchlassspannung Forward Voltage 4A
2003-05-26
5
LS E67B, LA E67B, LO E67B, LY E67B
Relative spektrale Emission Irel = f (), TA = 25 C, IF = 50 mA Relative Spectral Emission V() = spektrale Augenempfindlichkeit Standard eye response curve
100
OHL00589
Irel
% 80
V
60 yellow orange amber super-red
40
20
0 400
450
500
550
600
650
nm
700
Abstrahlcharakteristik Irel = f () Radiation Characteristic
40 30 20 10 0
OHL01660
1.0
50
0.8
0.6 60 0.4 70 0.2 80 90 100 1.0 0.8 0.6 0.4 0 20 40 60 80 100 120 0
2003-05-26
6
LS E67B, LA E67B, LO E67B, LY E67B
Durchlassstrom IF = f (VF) Forward Current TA = 25 C
10 2 mA
OHL00590
Relative Lichtstarke IV/IV(50 mA) = f (IF) Relative Luminous Intensity TA = 25 C
10 1
OHL00595
IF
10 1
IV I V (50 mA)
10 0 5
10 0
10 -1 5
10 -1
10 -2 5
yellow super-red, amber, orange
10 -2 1.3
1.5
1.7
1.9
2.1
2.3 V 2.5
10 -3 10 -1
5 10 0
5
10 1
mA 10 2
VF
Maximal zulassiger Durchlassstrom IF = f (T) Max. Permissible Forward Current
80 mA IF 70 60
OHL01413
IF
Relative Lichtstarke IV/IV(25 C) = f (TA) Relative Luminous Intensity IF = 50 mA
2.0
OHL00740
IV IV (25 C)
1.6
TA
50 40 30 20 10 0
A temp. ambient S temp. solder point
TS
1.4 1.2 1.0 0.8 0.6 0.4 0.2
0
20
40
60
80 C 100
0 -40 -20
0
20
40
60
C 100
T
2003-05-26 7
T
LS E67B, LA E67B, LO E67B, LY E67B
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C
0.12 A
OHL01505
Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C
0.12 A
OHL01506
IF
0.1 0.005 0.05 0.5
IF
0.10
0.08
0.08
0.06
0.06
0.005 0.05 0.5
0.04
0.04
0.02
0.02
0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102
0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102
tp
tp
2003-05-26
8
LS E67B, LA E67B, LO E67B, LY E67B
Mazeichnung Package Outlines
3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 2.1 (0.083) 0.8 (0.031) A 0.6 (0.024) C
2.1 (0.083) 1.7 (0.067) 0.9 (0.035) 0.7 (0.028)
(2.4 (0.094))
3.4 (0.134) 3.0 (0.118)
3.7 (0.146) 3.3 (0.130)
0.1 (0.004) typ
1.1 (0.043)
Package marking
0.5 (0.020)
C
C
41
0.18 (0.007) 0.12 (0.005)
0.6 (0.024) 0.4 (0.016)
GPLY6991
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Gewicht / Approx. weight: 35 mg
2003-05-26
9
LS E67B, LA E67B, LO E67B, LY E67B
Lotbedingungen Vorbehandlung nach JEDEC Level 2 Soldering Conditions Preconditioning acc. to JEDEC Level 2
IR-Reflow Lotprofil (nach IPC 9501) IR Reflow Soldering Profile (acc. to IPC 9501)
300 C
OHLY0597
T
250
240-245 C 10-40 s 183 C 120 to 180 s Ramp-down rate up to 6 K/s Defined for Preconditioning: up to 6 K/s Ramp-up rate up to 6 K/s
200
150
100
50 Defined for Preconditioning: 2-3 K/s 0 0 50 100 150 200 s 250
t
2003-05-26
10
LS E67B, LA E67B, LO E67B, LY E67B
Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802)
300 C T 250 235 C ... 260 C
OHLY0598
10 s
Normalkurve standard curve 2. Welle 2. wave Grenzkurven limit curves
200 1. Welle 1. wave 150 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling ca 200 K/s 5 K/s 2 K/s
0 0 50 100 150 t 200 s 250
2003-05-26
11
LS E67B, LA E67B, LO E67B, LY E67B
Empfohlenes Lotpaddesign Recommended Solder Pad IR Reflow Loten IR Reflow Soldering
Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation 2.3 (0.091) 0.8 (0.031)
1.1 (0.043)
Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. 3.3 (0.130) Anode 3.3 (0.130)
0.7 (0.028) Kathode/ Cathode
Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Lotstoplack Solder resist
_ Cu Flache / < 16 mm 2 per pad Cu-area
11.1 (0.437)
3.7 (0.146)
1.5 (0.059)
OHLPY440
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
2003-05-26
12
LS E67B, LA E67B, LO E67B, LY E67B
Empfohlenes Lotpaddesign Recommended Solder Pad Wellenloten (TTW) TTW Soldering
Anode 6.1 (0.240) 2.8 (0.110)
2 (0.079)
Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact.
2 (0.079)
3 (0.118)
2 (0.079)
2.8 (0.110) Padgeometrie fur verbesserte Warmeableitung Paddesign for improved heat dissipation
0.5 (0.020)
Kathode/ Cathode Cu Flache / > 16 mm 2 per pad Cu-area Lotstoplack Solder resist
OHAY1583
Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact.
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch).
Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Method of Taping / Polarity and Orientation Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm
Gurtung / Polaritat und Lage
1.5 (0.059)
4 (0.157)
2 (0.079)
1.75 (0.069)
3.5 (0.138)
8 (0.315)
C
2.9 (0.114)
4 (0.157)
3.6 (0.142)
C
OHAY0536
Mae werden wie folgt angegeben: mm (inch) / Dimensions are specified as follows: mm (inch). 2003-05-26 13
Bewegungsrichtung der Platine PCB-direction
C A
6 (0.236)
1 (0.039)
LS E67B, LA E67B, LO E67B, LY E67B
Revision History: 2003-05-26 Previous Version: Page 2 2 7 4 14 4 12 3, 4 5 2 13 2003-03-04
Date of change
Subjects (major changes since last revision) wavelength grouping for yellow, amber and orange forward voltage grouping for yellow, amber and super-red change of diagram rel. lum. intensity (TA) from OHL00569 to OHL00740 value (orange; temperature coefficient of VF from -1.8 to -3.7 mV/K) annotations value (TCdom from 0.04 to 0.05 nm/K) new IR solder pad (OHLPY439 to OHLPY440) value (reverse voltage from 5 V to 12 V) forward voltage groups for orange ordering code for super-red new recommended solder pad 2002-06-14 2002-07-25 2002-07-25 2002-08-05 2002-09-18 2002-10-25 2003-02-11 2003-05-26
Published by OSRAM Opto Semiconductors GmbH Wernerwerkstrasse 2, D-93049 Regensburg (c) All Rights Reserved. Attention please! The information describes the type of component and shall not be considered as assured characteristics. All typical data and graphs are basing on representative samples, but don't represent the production range. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components 1 may only be used in life-support devices or systems 2 with the express written approval of OSRAM OS. 1 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 2 Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health of the user may be endangered. 2003-05-26 14

▲Up To Search▲

Price & Availability of LAE67B-U2AA-24-1

	To Download LAE67B-U2AA-24-1 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .