 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PRODUCT INFORMATION SEPTEMBER 30, 1997 Creation of the World's Smallest Surface Mount Package Development of the Ultrasmall Broadband Si MMIC SMA3000 Series Overview Devices that use the UHF and microwave bands are continuing to surge in popularity, and are now found in popular everyday use in products such as portable telephones, BS/CS receivers, and automobile navigation systems. The demands for higher performance, further miniaturization, and lower prices of semiconductor devices used in the high-frequency receiver components are growing ever more intense, and thus there are strong market demands for the development of "Monolithic Microwave Integrated Circuits" (MMICs). While SANYO Electric Co., Ltd., has a history of development in high performance microwave-band silicon bipolar transistors, we have developed and will commercialize new ultracompact broadband Si MMIC amplifiers (the SMA3001, the SMA3002, and SMA3003) using a silicon bipolar process for a cutoff frequency of 16 GHz. The Si MMIC amplifiers developed in this project feature circuitry 50% smaller than conventional circuits as a result of developments in high-accuracy circuit simulation technologies; this circuitry made it possible to create the MCP6, one of the smallest surface mount packages in the world. Moreover, these amplifiers provide both superior power gain characteristics and a low noise figure over a wide range of frequency band from 10 MHz to 2 GHz, where the noise figure at 1 GHz is approximately 1 dB less than that of conventional broadband Si MMIC amplifiers. During the development of this product we have succeeded in developing submicron microemittertransistor cells, shallow-junction fabrication technology, parasitic-capacitance reduction processes, and a SANYO-proprietary low-noise silicon bipolar process, and improved reliability through the use of gold metallization. With the contributions to system miniaturization by the world's smallest packaging technology, this product will be well suited for buffer amplifiers for products such as BS/CS converters/tuners, mobile communications systems, and GPS receivers. SANYO Electric Co., Ltd. Semiconductor Business Headquarters Overseas Marketing Division TOKYO OFFICE: Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110 JAPAN Telephone: 03-3837-6318 Facsimile: 03-3837-6383 1 PRODUCT INFORMATION In the future, we are scheduled to further increase bandwidths and decrease power dissipation to develop ICs for satellite broadcasts and for wireless LANs. Features * Ultraminiaturization through the use of minimold packages (MCP6: 2.0 x 1.25 mm) * Broadband operation SMA3001: 10 MHz to 2.0 GHz (Gp 18 dB, VCC = 3 V) SMA3002: 10 MHz to 1.2 GHz (Gp 19 dB, VCC = 5 V) SMA3003: 10 MHz to 2.0 GHz (Gp 18 dB, VCC = 5 V) * Low noise figures SMA3001: NF = 2.9 dB (f = 1.0 GHz, VCC = 3 V) SMA3002: NF = 3.7 dB (f = 1.0 GHz, VCC = 5 V) SMA3003: NF = 3.2 dB (f = 1.0 GHz, VCC = 5 V) * High reliability Ti-Pt-Au metallization is used. Applications * These ICs are optimized for buffer amps for BS/CS converters and tuners, mobile communications systems, GPS equipment, etc. Specifications The SMA3001 Electrical Characteristics at Ta = 25C Parameter Circuit current Power gain Noise figure Saturation output power Symbol ICC GP NF PO (sat) VCC = 3 V VCC = 3 V, ICC = 13 mA, f = 1.0 GHz VCC = 3 V, ICC = 13 mA, f = 1.0 GHz VCC = 3 V, ICC = 13 mA, f = 0.8 GHz Conditions Standard Value 13 23 2.9 1 Unit mA dB dB dBm The SMA3002 Electrical Characteristics at Ta = 25C Parameter Circuit current Power gain Noise figure Saturation output power Symbol ICC GP NF PO (sat) VCC = 5 V VCC = 5 V, ICC = 29 mA, f = 1.0 GHz VCC = 5 V, ICC = 29 mA, f = 1.0 GHz VCC = 5 V, ICC = 29 mA, f = 0.8 GHz Conditions Standard Value 30 22 3.7 6 Unit mA dB dB dBm SANYO Electric Co., Ltd. Semiconductor Business Headquarters Overseas Marketing Division 2 PRODUCT INFORMATION The SMA3003 Electrical Characteristics at Ta = 25C Parameter Circuit current Power gain Noise figure Saturation output power Symbol ICC GP NF PO (sat) VCC = 5 V VCC = 5 V, ICC = 22 mA, f = 1.0 GHz VCC = 5 V, ICC = 22 mA, f = 1.0 GHz VCC = 5 V, ICC = 22 mA, f = 0.8 GHz Conditions Standard Value 22 22 3.2 1 Unit mA dB dB dBm Sample Availability Samples of the SMA3000 Series will be available in November 1997; production quantities are anticipated in April 1998. SANYO Electric Co., Ltd. Semiconductor Business Headquarters Overseas Marketing Division D1297/46 3 |
Price & Availability of SMA3000
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |