View MN2DS0003_1073362.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
Part No. Package Code No.
MN2DS0003
LQFP256-P-2828
SEMICONDUCTOR COMPANY MATSUSHITA ELECTRIC INDUSTRIAL CO., LTD.
Publication date: November 2004
SDD00030AEM
1
MN2DS0003
MN2DS0003
Single-chip LSI for DVD players
Overview
This is a super single-chip LSI for DVD players. A DVD player can be built by connecting this LSI, a driver IC, SDRAM, a flash memory, audio output DAC, and so on. This LSI builds in Analog Front End (analogFE) for analog signal processing, an optical disk controller which deals with servo control, and error correction, AV decoder which supports MPEG1/MPEG2/JPEG video decoding and DVD Audio/Windows Media Audio (WMA)/MP3 audio decoding, and a 32-bit CPU as a system controller with instruction cache.
30.000.20 28.000.10 192 193 129
128
Unit : mm
(1.40)
256
65
1.400.10 1.70 max
28.000.10 30.000.20
* High readability with built-in analog front-end DRC (digital read channel) * Various audio decoding (DVD Audio/WMA/MP3) * Progressive output * 4.7 G RAM play * FE/BE Unified Memory Architecture * Built-in Audio PLL
(1.40)
0.40
0.160.05 0.08 M
0.150.05
Feature
1
64
(1.00)
0.10
LQFP256-P-2828
Applications
DVD player for DVD-Audio and DVD-RAM
System block diagram of DVD player
SDRAM 64M / 128M MN2DS0003-H Display/Speaker DRC Analog FE DRV Servo AM32 (System Controller) ODC BE
Flash ROM
Microsoft, Windows Media and the Windows logo are trademarks, or registered trademarks of Microsoft corporation in the United States and/or other countries.
Note : The detailed information for this product is disclosed after non-disclosure agreement between your company and MEI.
SDD00030AEM
0.100.10
0 to 8 0.500.20
SEATING PLANE
2
MN2DS0003
Specifications
BLOCK FUNCTION CPU Core FEATURE Load/store architecture of five-step pipelining Linear address space is supported by no more than 4G bytes. 4K bytes instruction cache memory and 8K bytes data RAM Memory capacity up to 1-64 M bits. Address/data multiplex mode and separation mode are supported. 16-bit up/down counter x 2 (Up/Down counter) 8-bit down counter x 8 (Down counter/Cascade connection available) Watchdog timer Synchronous type (including I2C)/UART x 4 7/8-bit character length selectable, sends bit order selectable from LSB/MSB DVD error correction (Inner: 5 pile correction, Outer:8 pile correction, 16 burst correction) All CD-ROM mode including video CD data processing are supported. CLV16th velocity continuous reading, CD-DA look-ahead function,CD-Text Circuit which operates the signal from an optical pick-up and the RF signal processing circuit are built in. Focus servo control, tracking servo control and traverse servo control function Automatic adjustments(balance adjustment and gain adjustment for focus/tracking) CLV control and CAV control by FG signal Synchronous reproduction of rotation around disk (jitter free) mode function CD error correction (C1: double correction, C2: four pile correction) Built-in audio circuit and differential OP amplifier (2-dgree LPF) FE/BE Unified Memory Architecture MPEG1 system stream/MPEG2 program stream MPEG1 video standard/MPEG2 video standard DVD sub-image (SPU) SVCD sub-image(OGT) DVD-Audio still picture JPEG(Exif standard conforming) Dolby DigitalTM dtsTM MPEG1&2 Layer2/Layer3(MP3) DVD Video standard Linear PCM/DVD Audio standard (Linear PCM/MLP) WMATM CD-DA Descramble function(CSS, CPPM, CPRM) Audio Watermark detection CGMS WSS Macrovision Rev.7.1.L1 Macrovision (Progressive) Rev.1.2 54 MHz 10-bit DAC(5-ch.) NTSC/PAL/PAL60 encode Progressive output (525P/625P) Y/Cb/Cr output (interlace/progressive) Y/C/Composite output (interlace) RGB output Digital video output (REC656) PCM output: 6-ch. + Mix 2-ch. Digital audio output (IEC60958/61937) OSD two-plain display Scaling function of main image, sub-image, and JPEG image 3.3 V(I/O)/1.2V (Core) LQFP-256-pin
Flash-ROM BUS I/F SYSTEM CONTROLLOR Timer
Serial I/F Error Correction
Analog signal processing SERVO control function
FE
CIRC function
FE/BE memory sharing Stream decoding Video decoding Still picture decoding
Audio decoding
Copyright protection BE Video output
Audio output Other functions Power Package
Dolby Digital is a registered trademark of the Dolby Laboratories Licensing Corp. dts is a registered trademark of the DTS Technology. Windows Media is a trademark or registered trademark of Microsoft Corporation in the United States and/or other countries.
SDD00030AEM
3
Request for your special attention and precautions in using the technical information and semiconductors described in this material
(1) An export permit needs to be obtained from the competent authorities of the Japanese Government if any of the products or technical information described in this material and controlled under the "Foreign Exchange and Foreign Trade Law" is to be exported or taken out of Japan. (2) The technical information described in this material is limited to showing representative characteristics and applied circuits examples of the products. It neither warrants non-infringement of intellectual property right or any other rights owned by our company or a third party, nor grants any license. (3) We are not liable for the infringement of rights owned by a third party arising out of the use of the technical information as described in this material. (4) The products described in this material are intended to be used for standard applications or general electronic equipment (such as office equipment, communications equipment, measuring instruments and household appliances). Consult our sales staff in advance for information on the following applications: * Special applications (such as for airplanes, aerospace, automobiles, traffic control equipment, combustion equipment, life support systems and safety devices) in which exceptional quality and reliability are required, or if the failure or malfunction of the products may directly jeopardize life or harm the human body. * Any applications other than the standard applications intended. (5) The products and product specifications described in this material are subject to change without notice for modification and/or improvement. At the final stage of your design, purchasing, or use of the products, therefore, ask for the most up-to-date Product Standards in advance to make sure that the latest specifications satisfy your requirements. (6) When designing your equipment, comply with the guaranteed values, in particular those of maximum rating, the range of operating power supply voltage, and heat radiation characteristics. Otherwise, we will not be liable for any defect which may arise later in your equipment. Even when the products are used within the guaranteed values, take into the consideration of incidence of break down and failure mode, possible to occur to semiconductor products. Measures on the systems such as redundant design, arresting the spread of fire or preventing glitch are recommended in order to prevent physical injury, fire, social damages, for example, by using the products. (7) When using products for which damp-proof packing is required, observe the conditions (including shelf life and amount of time let standing of unsealed items) agreed upon when specification sheets are individually exchanged. (8) This material may be not reprinted or reproduced whether wholly or partially, without the prior written permission of Matsushita Electric Industrial Co., Ltd.
2003 SEP

▲Up To Search▲

Price & Availability of MN2DS0003

	To Download MN2DS0003 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .