 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| AWL6152 2.4 GHz Wireless LAN Power Amplifier Module ADVANCED PRODUCT INFORMATION - Rev 0.2 FEATURES * * InGaP HBT Technology < 3.5% EVM at +25 dBm Output Power (+5 V Supply), with 802.11g Modulation at 54 Mbps Data Rate < 3% EVM at +21 dBm Output Power (+3.3 V Supply), with 802.11g Modulation at 54 Mbps Data Rate +3 V to +5 V Supply High Efficiency 4 x 4 x 1.5 mm Surface Mount Module 50 - Matched RF Ports for Reduced External Component Count * * * * * APPLICATIONS * * 802.11g/b WLAN Stations and Client Cards 802.11g/b WLAN Access Points M7 Package 10 Pin 4mm x 4mm Surface Mount Module PRODUCT DESCRIPTION The ANADIGICS AWL6152 WLAN Power Amplifier is an easy to use module that delivers high levels of linearity and efficiency for high data rate applications. Designed for the 2.4 GHz WLAN standards, it supports the 54 Mbps data rates specified in IEEE 802.11g. Requiring a single +3 V to +5 V supply and a reference voltage input, the AWL6152 reduces system power consumption by offering a low leakage current while the amplifier is shut down. No external circuits are required for RF impedance matching, thus reducing component costs and making it easy to incorporate the device into new designs. The AWL6152 is manufactured using an advanced InGaP HBT technology that offers state-of-the-art reliability, temperature stability and ruggedness. It is offered in a 4mm x 4mm x 1.5mm surface mount module optimized for a 50 system. VCC VREF Bias Control RFIN Matching Network Matching Network RFOUT GND Figure 1: Module Block Diagram 02/2004 AWL6152 GND VCC RFIN GND N/C VREF 1 2 3 4 5 GND Figure 2: Pinout (X-ray Top View) 10 VCC 9 8 7 6 GND RFOUT GND GND Table 1: Pin Description PIN 1 2 3 4 5 6 7 8 9 10 NAME V CC RFIN GND N/C VREF GND GND RFOUT GND V CC DESCRIPTION Supply Voltage RF Input Ground No Connection Reference Voltage Ground Ground RF Output Ground Supply Voltage 2 ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 AWL6152 ELECTRICAL CHARACTERISTICS Table 2: Absolute Minimum and Maximum Ratings PARAMETER Supply Voltage (VCC) Reference Voltage (VREF) RF Input Power (PIN) Storage Temperature MIN 0 0 -40 MAX +5.5 +3.5 +10 +150 UNIT V V dB m C Stresses in excess of the absolute ratings may cause permanent damage. Functional operation is not implied under these conditions. Exposure to absolute ratings for extended periods of time may adversely affect reliability. Table 3: Operating Ranges PARAMETER Operating Frequency (f) Supply Voltage (VCC) Reference Voltage (VREF) MIN 2400 +3.0 0 -25 TYP +2.85 +21 +25 +25 +28 MAX 2485 +5.5 +0.5 +85 UNIT MHz V V PA"on" PA"shut down" V CC V CC V CC V CC = +3.3 = +5.0 = +3.3 = +5.0 V, 802.11g V, 802.11g V, 802.11b V, 802.11b modulation modulation modulation modulation COMMENTS RF Output Power (POUT) dB m Case Temperature (TC) C The device may be operated safely over these conditions; however, parametric performance is guaranteed only over the conditions defined in the electrical specifications. ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 3 AWL6152 Table 4: Electrical Specifications - 802.11g Modulation, 54 Mbps Data Rate (TC = +25 C, VCC = +3.3 V, VREF = +2.85 V, POUT = +21 dBm, 50 system) PARAMETER Gain Gain Ripple Constellation RMS Error Spectrum Mask at 11 MHz Offset Spectrum Mask at 20 MHz Offset Spectrum Mask at 30 MHz Offset Current Consumption V CC VREF Leakage Current Input Return Loss P 1dB Harmonics 2fo 3fo Maximum load mismatch stress with no permanent degradation or failure MIN TYP 31.5 3 -30 MAX 0.3 -20 -28 -40 UNIT dB dB % dB dB dB dB within each channel COMMENTS 10:1 190 5.5 <10 <-10 +28 -45 -56 - - mA A dB dB m VREF = 0 V 50 impedance CW tone dB c VSWR VCC = +5.5 V 4 ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 AWL6152 Table 5: Electrical Specifications - 802.11g Modulation, 54 Mbps Data Rate (TC = +25 C, VCC = +5 V, VREF = +2.85 V, POUT = +25 dBm, 50 system) PARAMETER Gain Gain Ripple Constellation RMS Error Spectrum Mask at 11 MHz Offset Spectrum Mask at 20 MHz Offset Spectrum Mask at 30 MHz Offset Current Consumption V CC VREF Leakage Current Input Return Loss P 1dB Harmonics 2fo 3fo Maximum load mismatch stress with no permanent degradation or failure MIN TYP 32.5 3.5 -29 MAX 0.3 -20 -28 -40 UNIT dB dB % dB dB dB dB within each channel COMMENTS 10:1 290 5.5 <10 <-10 +31 -42 -56 - - mA A dB dB m VREF = 0 V 50 impedance CW tone dB c VSWR VCC = +5.5 V ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 5 AWL6152 Table 6: Electrical Specifications - 802.11b Modulation (TC = +25 C, VCC = +3.3 V, VREF = +2.85 V, POUT = +25 dBm, 50 system) PARAMETER Gain First Sidelobe Power Second Sidelobe Power Current Consumption V CC VREF Leakage Current Input Return Loss P 1dB Harmonics 2fo 3fo Maximum load mismatch stress with no permanent degradation or failure MIN 10:1 TYP 31.5 300 5.5 <10 <-10 +28 -50 -63 MAX -30 -50 UNIT dB dB c dB c Gaussian filtering Gaussian filtering COMMENTS mA A dB dB m VREF = 0 V 50 impedance CW tone dB c CW Input VSWR VCC = +5.5 V 6 ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 AWL6152 Table 7: Electrical Specifications - 802.11b Modulation (TC = +25 C, VCC = +5 V, VREF = +2.85 V, POUT = +28 dBm, 50 system) PARAMETER Gain First Sidelobe Power Second Sidelobe Power Current Consumption V CC VREF Leakage Current Input Return Loss P 1dB Harmonics 2fo 3fo Maximum load mismatch stress with no permanent degradation or failure MIN 10:1 TYP 32.5 420 5.5 <10 <-10 +31 -50 -63 - MAX -30 -50 - UNIT dB dB c dB c COMMENTS Gaussian filtering Gaussian filtering mA A dB dB m VREF = 0 V 50 impedance CW tone dB c CW Input VSWR VCC = +5.5 V ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 7 AWL6152 PERFORMANCE DATA Figure 3: EVM and Gain vs. Frequency (TA = +25 C, VCC = +3.3 V, VREF = +2.85 V, POUT = +21 dBm, 54 Mbps 802.11g) 10 36 10 EVM Gain Figure 4: EVM and Gain vs. Frequency (TA = +25 C, VCC = +5 V, VREF = +2.85 V, POUT = +25 dBm, 54 Mbps 802.11g) 36 EVM 34 8 Gain 34 8 Gain (dB) 4 30 4 30 2 28 2 28 0 2400 2420 2440 2460 26 2480 0 2400 2420 2440 2460 26 2480 Frequency (MHz) Frequency (MHz) Figure 5: Gain and Current Consumption vs. Output Power (TA = +25 C, VCC = +3.3 V, VREF = +2.85 V, f = 2472 MHz, 54 Mbps 802.11g) 36 350 Figure 6: Gain and Current Consumption vs. Output Power (TA = +25 C, VCC = +5 V, VREF = +2.85 V, f = 2472 MHz, 54 Mbps 802.11g) 36 500 34 290 34 420 Current (mA) Gain (dB) 30 170 Gain (dB) 32 230 32 340 30 260 Gain 28 Current 110 28 Gain Current 180 26 10 12 14 16 18 20 22 24 26 50 26 14 16 18 20 22 24 26 28 30 100 Output Power (dBm) Output Power (dBm) 8 ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 Current (mA) Gain (dB) EVM (%) EVM (%) 6 32 6 32 AWL6152 Figure 7: Gain and Current Consumption vs. VREF (TA = +25 C, VCC = +3.3 V, f = 2472 MHz, POUT = +21 dBm, 54 Mbps 802.11g) 36 200 Figure 8: Gain and Current Consumption vs. VREF (TA = +25 C, VCC = +5 V, f = 2472 MHz, POUT = +25 dBm, 54 Mbps 802.11g) 36 300 34 180 34 260 Current (mA) Gain (dB) 30 140 Gain (dB) 32 160 32 220 30 180 Gain 28 Current 120 28 Gain Current 140 26 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 100 26 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 100 Vref (V) Vref (V) Figure 9: EVM vs. VREF (TA = +25 C, f = 2472 MHz, 54 Mbps 802.11g) 10 10 Vcc = +3.3V, Pout = +21 dBm Vcc = +5 V, Pout = +25 dBm Figure 10: EVM vs. Output Power (TA = +25 C, VREF = +2.85 V, f = 2472 MHz, 54 Mbps 802.11g) Vcc = +3.3V Vcc = +5 V 8 8 EVM (%) EVM (%) 6 6 4 4 2 2 0 2.4 2.5 2.6 2.7 2.8 2.9 3 3.1 0 10 15 20 25 30 Vref (V) Output Power (dBm) ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 Current (mA) 9 AWL6152 APPLICATION INFORMATION The only external components required for the AWL6152 are bypass capacitors for the supply and reference voltages (see Figure 11). When VREF is pulled down to 0 V, the amplifier is placed in a lowcurrent shut down mode. VCC1 22uF tantalum (optional) RF IN 0.01uF 1 2 3 VCC RFIN GND N/C VREF VCC GND RFOUT GND GND GND at slug 10 9 8 7 6 RF OUT x VREF 4 5 0.01uF Figure 11: Application Circuit 10 ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 AWL6152 PACKAGE OUTLINE Figure 12: M7 Package Outline - 10 Pin 4mm x 4mm Surface Mount Module ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 11 AWL6152 ORDERING INFORMATION ORDER NUMBER TEMPERATURE RANGE -25 C to +85C PACKAGE DESCRIPTION 10 Pin 4mm x 4mm Surface Mount Module COMPONENT PACKAGING AWL6152M7P8 2,500 piece Tape and Reel ANADIGICS, Inc. 141 Mount Bethel Road Warren, New Jersey 07059, U.S.A. Tel: +1 (908) 668-5000 Fax: +1 (908) 668-5132 URL: http://www.anadigics.com E-mail: Mktg@anadigics.com IMPORTANT NOTICE ANADIGICS, Inc. reserves the right to make changes to its products or to discontinue any product at any time without notice. The product specifications contained in Advanced Product Information sheets and Preliminary Data Sheets are subject to change prior to a product's formal introduction. Information in Data Sheets have been carefully checked and are assumed to be reliable; however, ANADIGICS assumes no responsibilities for inaccuracies. ANADIGICS strongly urges customers to verify that the information they are using is current before placing orders. WARNING ANADIGICS products are not intended for use in life support appliances, devices or systems. Use of an ANADIGICS product in any such application without written consent is prohibited. 12 ADVANCED PRODUCT INFORMATION - Rev 0.2 02/2004 |
Price & Availability of AWL6152
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |