 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| PHOTOCOUPLER PS2701A-1 HIGH ISOLATION VOLTAGE SOP PHOTOCOUPLER -NEPOC Series- DESCRIPTION The PS2701A-1 is an optically coupled isolator containing a GaAs light emitting diode and an NPN silicon phototransistor to realize an excellent cost performance. This package is SOP (Small Outline Package) type and has shield effect to cut off ambient light. It is designed for high density mounting applications. FEATURES * High isolation voltage (BV = 3 750 Vr.m.s.) * SOP (Small Outline Package) type * Ordering number of taping product: PS2701A-1-F3, F4 * Pb-Free product * Safety standards * UL approved: File No. E72422 * DIN EN60747-5-2 (VDE0884 Part2) approved (Option) PIN CONNECTION (Top View) 4 3 1. Anode 2. Cathode 3. Emitter 4. Collector 1 2 APPLICATIONS * Hybrid IC * Measuring instruments * Power supply * Programmable logic controllers Document No. PN10396EJ02V0DS (2nd edition) Date Published December 2004 CP(K) The mark shows major revised points. PS2701A-1 PACKAGE DIMENSIONS (in millimeters) PS2701A-1 4.00.5 4 3 2.10.2 0.10.1 2.54 0.4 +0.10 -0.05 0.25 M 0.15 +0.10 -0.05 1 2 7.00.3 4.4 2.0 0.50.3 MARKING EXAMPLE No. 1 pin Mark 701A N301 Assembly Lot *1 N 3 01 Week Assembled Year Assembled (Last 1 Digit) CTR Rank Code *1 Bar : Pb-Free Remark "PS2" and "-1" are omitted from original type number 2 Data Sheet PN10396EJ02V0DS PS2701A-1 ORDERING INFORMATION Part Number PS2701A-1 PS2701A-1-F3 PS2701A-1-F4 PS2701A-1-V PS2701A-1-V-F3 PS2701A-1-V-F4 PS2701A-1 PS2701A-1-F3 PS2701A-1-F4 PS2701A-1-V PS2701A-1-V-F3 PS2701A-1-V-F4 Order Number PS2701A-1 PS2701A-1-F3 PS2701A-1-F4 PS2701A-1-V PS2701A-1-V-F3 PS2701A-1-V-F4 PS2701A-1-A PS2701A-1-F3-A PS2701A-1-F4-A PS2701A-1-V-A PS2701A-1-V-F3-A PS2701A-1-V-F4-A Magazine case 100 pcs Embossed Tape 3 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Pb-Free Magazine case 100 pcs Embossed Tape 3 500 pcs/reel Magazine case 100 pcs Embossed Tape 3 500 pcs/reel DIN EN60747-5-2 (VDE0884 Part2) Approved (Option) Standard products (UL approved) Solder Plating Specification Solder contains lead Packing Style Magazine case 100 pcs Embossed Tape 3 500 pcs/reel Safety Standard Approval Standard products (UL approved) Application Part *1 Number PS2701A-1 *1 For the application of the Safety Standard, following part number should be used. Data Sheet PN10396EJ02V0DS 3 PS2701A-1 ABSOLUTE MAXIMUM RATINGS (TA = 25C, unless otherwise specified) Parameter Diode Forward Current (DC) Reverse Voltage Power Dissipation Derating Power Dissipation Peak Forward Current Transistor *1 Symbol IF VR Ratings 30 6 0.8 80 0.5 70 5 30 1.5 150 3 750 -55 to +100 -55 to +150 Unit mA V mW/C mW A V V mA mW/C mW Vr.m.s. C C PD/C PD IFP VCEO VECO IC Collector to Emitter Voltage Emitter to Collector Voltage Collector Current Power Dissipation Derating Power Dissipation PC/C PC BV TA Tstg Isolation Voltage *2 Operating Ambient Temperature Storage Temperature *1 PW = 100 s, Duty Cycle = 1% *2 AC voltage for 1 minute at TA = 25C, RH = 60% between input and output 4 Data Sheet PN10396EJ02V0DS PS2701A-1 ELECTRICAL CHARACTERISTICS (TA = 25C) Parameter Diode Forward Voltage Reverse Current Terminal Capacitance Transistor Coupled Collector to Emitter Dark Current Current Transfer Ratio (IC/IF) *1 Symbol VF IR Ct ICEO CTR IF = 5 mA VR = 5 V Conditions MIN. TYP. 1.2 MAX. 1.4 5 Unit V A pF V = 0 V, f = 1.0 MHz IF = 0 mA, VCE = 70 V IF = 5 mA, VCE = 5 V 50 10 100 300 nA % Collector Saturation Voltage Isolation Resistance Isolation Capacitance Rise Time Fall Time *2 VCE (sat) RI-O CI-O tr tf IF = 10 mA, IC = 2 mA VI-O = 1.0 kVDC V = 0 V, f = 1.0 MHz VCC = 5 V, IC = 2 mA, RL = 100 10 11 0.13 0.3 V 0.4 5 7 pF s *2 *1 CTR rank N: 50 to 300 (%) P: 150 to 300 (%) L: 100 to 300 (%) M: 50 to 150 (%) *2 Test circuit for switching time Pulse input PW = 100 s, Duty cycle = 1/10 IF 50 VOUT RL = 100 VCC Data Sheet PN10396EJ02V0DS 5 PS2701A-1 TYPICAL CHARACTERISTICS (TA = 25C, unless otherwise specified) DIODE POWER DISSIPATION vs. AMBIENT TEMPERATURE Diode Power Dissipation PD (mW) 0.8 mW/C 80 Transistor Power Dissipation PC (mW) 100 TRANSISTOR POWER DISSIPATION vs. AMBIENT TEMPERATURE 200 1.5 mW/C 150 60 100 40 20 50 0 0 25 50 75 100 125 0 0 25 50 75 100 125 Ambient Temperature TA (C) Ambient Temperature TA (C) FORWARD CURRENT vs. FORWARD VOLTAGE 100 50 Forward Current IF (mA) COLLECTOR CURRENT vs. COLLECTOR TO EMITTER VOLTAGE 30 10 5 Collector Current IC (mA) TA = +100C +60C +25C 25 20 15 10 5 0 0 IF = 10 mA 1 0.5 0C -25C -55C 5 mA 2 mA 1 mA 0.1 0.05 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 1.5 2 4 6 8 10 Forward Voltage VF (V) Collector to Emitter Voltage VCE (V) COLLECTOR TO EMITTER DARK CURRENT vs. AMBIENT TEMPERATURE Collector to Emitter Dark Current ICEO (nA) 10 000 COLLECTOR CURRENT vs. COLLECTOR SATURATION VOLTAGE 10 IF = 10 mA 5 mA 1 000 VCE = 24 V VCE = 70 V Collector Current IC (mA) 2 mA 100 1 1 mA 10 1 0 25 50 75 100 Ambient Temperature TA (C) 0.1 0 0.2 0.4 0.6 0.8 1.0 Collector Saturation Voltage VCE (sat) (V) Remark The graphs indicate nominal characteristics. Data Sheet PN10396EJ02V0DS 6 PS2701A-1 NORMALIZED CURRENT TRANSFER RATIO vs. AMBIENT TEMPERATURE Normalized Current Transfer Ratio CTR CURRENT TRANSFER RATIO vs. FORWARD CURRENT 300 Current Transfer Ratio CTR (%) 1.2 1.0 0.8 0.6 0.4 Normalized to 1.0 at TA = 25C, IF = 5 mA, VCE = 5 V 0.2 90% 300% 0 -75 -50 -25 0 250 200 150 100 50 VCE = 5 V, n=3 Sample A B C 25 50 75 100 0 0.01 0.1 1 10 100 Ambient Temperature TA (C) Forward Current IF (mA) SWITCHING TIME vs. LOAD RESISTANCE 100 IC = 2 mA, VCC = 5 V, CTR = 236 % tf tr SWITCHING TIME vs. LOAD RESISTANCE 1 000 IF = 5 mA, VCC = 5 V, CTR = 236 % Switching Time t ( s) tf Switching Time t ( s) 10 td 100 ts 1 ts 10 tr 0.1 10 100 1 000 10 000 1 1 td 10 Load Resistance RL (k) 100 Load Resistance RL () FREQUENCY RESPONSE 5 0 CTR (Relative Value) Normalized Gain GV 1.2 LONG TERM CTR DEGRADATION IF = 5 mA (TYP.) 1.0 0.8 TA = 25C 0.6 0.4 0.2 0 10 TA = 60C -5 100 -10 300 -15 -20 -25 0.1 IF = 5 mA, VCE = 5 V RL = 1 k 1 10 Frequency f (kHz) 100 1 000 102 103 104 105 Time (Hr) Remark The graphs indicate nominal characteristics. Data Sheet PN10396EJ02V0DS 7 PS2701A-1 TAPING SPECIFICATIONS (in millimeters) Outline and Dimensions (Tape) 2.00.05 4.00.1 1.750.1 1.5+0.1 -0 2.9 MAX. 5.50.05 12.00.2 1.550.1 8.00.1 7.40.1 4.60.1 2.40.1 0.3 Tape Direction PS2701A-1-F3 PS2701A-1-F4 Outline and Dimensions (Reel) 2.00.5 3302.0 2.00.5 13.00.2 1001.0 R 1.0 21.00.8 13.00.2 13.51.0 17.51.0 Packing: 3 500 pcs/reel 11.9 to 15.4 Outer edge of flange 8 Data Sheet PN10396EJ02V0DS PS2701A-1 NOTES ON HANDLING 1. Recommended soldering conditions (1) Infrared reflow soldering * Peak reflow temperature * Time of peak reflow temperature * Time of temperature higher than 220C * Time to preheat temperature from 120 to 180C * Number of reflows * Flux 260C or below (package surface temperature) 10 seconds or less 60 seconds or less 12030 s Three Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) Recommended Temperature Profile of Infrared Reflow Package Surface Temperature T (C) (heating) to 10 s 260C MAX. 220C to 60 s 180C 120C 12030 s (preheating) Time (s) (2) Wave soldering * Temperature * Time * Preheating conditions * Number of times * Flux 260C or below (molten solder temperature) 10 seconds or less 120C or below (package surface temperature) One (Allowed to be dipped in solder including plastic mold portion.) Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (3) Soldering by soldering iron * Peak temperature (lead part temperature) * Time (each pins) * Flux 350C or below 3 seconds or less Rosin flux containing small amount of chlorine (The flux with a maximum chlorine content of 0.2 Wt% is recommended.) (a) Soldering of leads should be made at the point 1.5 to 2.0 mm from the root of the lead. (b) Please be sure that the temperature of the package would not be heated over 100C. Data Sheet PN10396EJ02V0DS 9 PS2701A-1 (4) Cautions * Fluxes Avoid removing the residual flux with freon-based and chlorine-based cleaning solvent. 2. Cautions regarding noise Be aware that when voltage is applied suddenly between the photocoupler's input and output or between collector-emitters at startup, the output transistor may enter the on state, even if the voltage is within the absolute maximum ratings. USAGE CAUTIONS 1. Protect against static electricity when handling. 2. Avoid storage at a high temperature and high humidity. 10 Data Sheet PN10396EJ02V0DS 4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279 Subject: Compliance with EU Directives CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information. Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*) If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative. Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability. |
Price & Availability of PS2701A-1
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |