|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
EGP30A THRU EGP30K 3.0 AMPS. Glass Passivated High Efficient Plastic Rectifiers Voltage Range 50 to 800 Volts Current 3.0 Amperes Features Plastic material used carries Underwriters Laboratories Classification 94V-O Glass passivated cavity-free junction Superfast recovery time for high efficiency Low forward voltage, high current capability Low leakage current High surge current capability High temperature metallurgically bonded construction High temperature soldering guaranteed: 300 / 10seconds, .375"(9.5mm) lead length at 5 lbs., (2.3kg) tension DO-201 Mechanical Data Case: JEDEC DO-201 molded plastic over solid glass body Lead: Plated axial leads, solderable per MIL-STD-750, Method 2026 Polarity: Color band denotes cathode end Mounting position: Any Weight: 0.048 ounce, 1.28 gram Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol EGP EGP Type Number 30A 30B Maximum Recurrent Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current 0.375"(9.5mm) Lead Length @ TA = 55 Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 3.0A Maximum DC Reverse Current @ TA=25 at Rated DC Blocking Voltage @ TA=125 Maximum Reverse Recovery Time ( Note 1 ) o TA=25 C Typical Junction Capacitance ( Note 2 ) Typical Thermal Resistance (Note 3) Operating and Storage Temperature Range EGP EGP EGP EGP EGP Units 30D 30F 30G 30J 30K 200 140 200 300 210 300 3.0 125 400 280 400 600 420 600 800 560 800 V V V A A I(AV) IFSM VF IR Trr Cj RJA 0.95 1.25 5.0 100 50 1.7 V uA uA 75 50 nS pF /W 60 40 -65 to + 150 TJ TSTG Notes: 1. Reverse Recovery Test Conditions: IF=0.5A, IR=1.0A, IRR=0.25A 2. Measured at 1.0 MHz and Applied Reverse Voltage of 4.0V D.C. 3. Mount on Cu-Pad Size 16mm x 16mm on P.C.B. - 590 - RATINGS AND CHARACTERISTIC CURVES (EGP30A THRU EGP30K) FIG.1- REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM 50W NONINDUCTIVE 10W NONINDUCTIVE +0.5A (-) DUT (+) 50Vdc (approx) (-) PULSE GENERATOR (NOTE 2) 1W NON INDUCTIVE OSCILLOSCOPE (NOTE 1) (+) 0 -0.25A trr NOTES: 1. Rise Time=7ns max. Input Impedance= 1 megohm 22pf 2. Rise Time=10ns max. Sourse Impedance= 50 ohms -1.0A 1cm SET TIME BASE FOR 5/ 10ns/ cm AVERAGE FORWARD CURRENT. (A) 3.0 FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE RESISTIVE OR INDUCTIVE LOAD 0.375" (9.5mm) LEAD LENGTH FIG.5- TYPICAL REVERSE CHARACTERISTICS 100 Tj=150 0C INSTANTANEOUS REVERSE CURRENT. ( A) 2.0 10 Tj=125 0C 1 1.0 0 0 25 50 75 100 o 125 150 175 0.1 Tj=75 0C AMBIENT TEMPERATURE. ( C) PEAK FORWARD SURGE CURRENT. (A) FIG.3- MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 175 150 125 100 75 50 25 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 0.01 Tj=25 0C 0.001 0 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FIG.6- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 50 PULSE WIDTH-300 S 1% DUTY CYCLE INSTANTANEOUS FORWARD CURRENT. (A) 0 1 10 NUMBER OF CYCLES AT 60Hz 100 10 Tj=150 0C FIG.4- TYPICAL JUNCTION CAPACITANCE 210 1 Tj=25 0C JUNCTION CAPACITANCE.(pF) 180 150 120 90 60 30 0 0.1 EGP30A-EGP30D EGP30F-EGP30K 1 Tj=25 0C f=1.0MHz Vsig=50mVp-p 0.1 EGP30A-EGP30D EGP30F EGP30K 0.01 0.2 10 100 1000 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FORWARD VOLTAGE. (V) REVERSE VOLTAGE. (V) - 591 - |
Price & Availability of EGP30A |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |