|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
Micrel, Inc. 3.3V 800MHz PRECISION PECL AMPLIFIER WITH LOW-GAIN FEEDBACK Precision Edge SY89207L Precision Edge(R) SY89207L (R) s 3.0V to 3.8V power supply option s Guaranteed AC parameters over temperature: * fMAX = 800MHz * < 200ps differential propagation delay (D to QFB) * < 730ps differential propagation delay (D to QHG) * < 250ps tr / tf s Low-gain feedback path QFB = +10V/V s VBB reference output voltage s Wide temperature range: -40C to +85C s Available in 10-pin (3mm x 3mm) MSOP s LVPECL/LVECL/CMOS compatible EN option Precision Edge(R) DESCRIPTION The SY89207L is a differential receiver amplifier optimized for crystal oscillator applications. The device includes an additional low differential gain (+10V/V) output stage (QFB) ideal for feedback applications common in crystal oscillator gain blocks. The SY89207L is fully differential, with a bandwidth > 800MHz over temperature and voltage. For applications that require output disable control, a LVPECL/LVECL/CMOS compatible enable pin (EN) will force the differential output into a fixed logic state. The SY89207L also includes a VBB reference voltage for single-ended or AC-coupled applications. The SY89207L PECL logic is 100k ECL compatible. Operation is guaranteed over the -40C to +85C temperature range and 3.3V nominal supply voltage range. All support documentation can be found on Micrel's web site at www.micrel.com. APPLICATIONS s Oscillator timing modules BLOCK DIAGRAM QFB /QFB D /D VBB LEN EN Q VCC QHG /QHG LATCH D VEE Precision Edge is a registered trademark of Micrel, Inc. M9999-051805 hbwhelp@micrel.com or (408) 955-1690 Rev.: B Amendment: /0 1 Issue Date: May 2005 Micrel, Inc. Precision Edge(R) SY89207L PACKAGE/ORDERING INFORMATION Ordering Information(1) QFB 1 /QFB 2 D3 /D 4 VBB 5 10 VCC 9 QHG 8 /QHG 7 VEE 6 EN Part Number SY89207LMI SY89207LMITR(2) SY89207LMG SY89207LMGTR(2) Package Type K10-1 K10-1 K10-1 K10-1 Operating Range Industrial Industrial Industrial Industrial Package Marking SY89207L SY89207L SY89207L with Pb-Free bar-line indicator SY89207L with Pb-Free bar-line indicator Lead Finish Sn-Pb Sn-Pb Pb-Free NiPdAu Pb-Free NiPdAu 10-Pin MSOP (K10-1) Notes: 1. Contact factory for die availability. Dice are guaranteed at TA = 25C, DC electricals only. 2. Tape and Reel. PIN DESCRIPTION Pin Number 1, 2 3, 4 5 Pin Name QFB, /QFB D, /D VBB Pin Function Differential clock outputs for feedback path: Nominal DC gain +10. LVPECL, LVECL differential inputs: Internal 75k pull-down resistor. VCC -1.32V reference voltage for single-ended inputs: It provides the switching reference for the input differential amplifier. When unused, it can be left open. For single-ended PECL applications connect VBB to /D input. For differential AC-coupled inputs, terminate each input with 50 to VBB as close to the input pins as possible. Always bypass the VBB pin with a 0.01F capacitor to VCC. Enable: LVPECL/LVECL/CMOS compatible input control with internal 25k pull-up resistor. It enables/disables the high-gain output (QHG). Default state is enabled, logic HIGH, if left floating When EN pin is pulled to a logic LOW or GND, the QHG output pair will be latched, as described in the "Truth Table." EN is synchronous so that the outputs will only be enabled/disabled when they are in the LOW state. Input threshold is VBB. Negative power supply: For LVECL operation, connect to negative supply. For LVPECL operation, connect to GND. Differential high-gain outputs: Nominal DC gain is greater than +200. Positive power supply: For LVECL operation, connect to VCC = 0V. For LVPECL operation, connect to 3.3V. Bypass with 0.1F0.01F low ESR capacitors. 6 EN 7 8, 9 10 VEE QHG, /QHG VCC TRUTH TABLE EN 1 0 QHG Out Data Logic Low /QHG Out /Data Logic High M9999-051805 hbwhelp@micrel.com or (408) 955-1690 2 Micrel, Inc. Precision Edge(R) SY89207L Absolute Maximum Ratings(1) Power Supply Voltage (VCC - VEE) ............................ +6.0V PECL Input Voltage (VIN) .......................... 0V to VCC +0.5V Voltage Applied to Output at High State (VEE = 0V) ............................................................ -0.5V to +5.5V Output Current (IOUT) Continuous ............................................................. 50mA Surge .................................................................... 100mA Lead Temperature (soldering, 10 sec.) ..................... 220C Storage Temperature (TS) ....................... -65C to +150C Operating Ratings(2) Supply Voltage (VIN) ................................... +3.0V to +3.8V Ambient Temperature (TA) ......................... -40C to +85C Junction Temperature (TJ) ........................................ 160C Package Thermal Resistance MSOP (JA) Still Air ........................................................... 113C/W MSOP (JB) ........................................................ 74C/W DC ELECTRICAL CHARACTERISTICS VCC = +3.0V to +3.8V; TA = -40C to +85C; unless noted. Symbol VCC ICC VBB IIH IIL CIN EN Parameter Power Supply Voltage Power Supply Current Reference Voltage Input HIGH Current Input LOW Current Input Capacitance Enable LVECL/LVPECL/CMOS compatible VEE D, /D EN D, /D EN VIN = VIH (max) VIN = VCC VIN = VIL (min) VIN = GND 0.5 -300 0.75 VCC (LVPECL) (LVECL) Condition VEE = GND VCC = GND VCC = 3.8V Min 3.0 -3.8 Typ 3.3 -3.3 Max 3.8 -3.0 46 VCC-1.26 VCC-1.32 VCC-1.38 150 100 Units V V mA V A A A A pF V LVPECL/LVECL DC ELECTRICAL CHARACTERISTICS VCC = +3.0V to +3.8V and VEE = 0V, VCC = 0V and VEE = -3.0V to -3.8V; TA = -40C to +85C; unless otherwise noted. Symbol VOH VOL VIH VIL VIHCMR Notes: 1. Permanent device damage may occur if the ratings in the "Absolute Maximum Ratings" section are exceeded. This is a stress rating only and functional operation is not implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 2. The data sheet limits are not guaranteed if the device is operated beyond the operating ratings. 3. VIHCMR is referenced to the most positive side of the differential input signal. Parameter Output High Voltage Output Low Voltage Input HIGH Voltage Input LOW Voltage Input High Voltage Common Mode Range Condition 50 to VCC -2V 50 to VCC -2V Min 2.215 1.470 2.135 1.490 Typ 2.305 1.595 -- -- -- Max 2.42 1.745 2.420 1.825 VCC -0.8 Units V V V V V Note 3 2.0 M9999-051805 hbwhelp@micrel.com or (408) 955-1690 3 Micrel, Inc. Precision Edge(R) SY89207L AC ELECTRICAL CHARACTERISTICS VCC = +3.0V to +3.8V and VEE = GND or VEE = -3.0V to -3.8V and VCC = GND; TA = -40C to +85C; unless noted. Symbol fMAX tpd Parameter Maximum Frequency Propagation Delay to QFB, /QFB to QHG, /QHG tS tH tJITTER tSKEW VPP tr tf Set-Up Time Hold Time Cycle-to-Cycle Jitter Duty Cycle Skew Minimum Input Swing Output Rise/Fall Times (20% to 80%) (Diff.) (Single) (Diff.) (Single) Enable Pin(4) Enable RMS Note 5 Note 6 At full output swing 150 250 Pin(4) 650 650 0.2 5 20 Condition Min 800 200 230 730 780 Typ Max Units MHz ps ps ps ps ps ps ps ps mV ps Notes: 4. See "Timing Waveform" section. 5. Duty cycle skew is the difference between rise and fall time propagation delay through the device. 6. The device has a DC gain of 10 for Q, /Q outputs, and DC gain of 200 or higher for QHG, /QHG. See "Timing Waveform" minimum input swing. TIMING WAVEFORMS D 150mV /D Figure 1. Minimum Input Swing D tS EN tH VCC -- VBB VCC -- VBB Q FB Q HG Figure 2. Set-Up and Hold Timing M9999-051805 hbwhelp@micrel.com or (408) 955-1690 4 Micrel, Inc. Precision Edge(R) SY89207L TERMINATION RECOMMENDATIONS +3.3V +3.3V ZO = 50 ZO = 50 R1 130 R1 130 +3.3V R2 82 R2 82 Vt = VCC-2V Figure 3. Parallel Termination-Thevenin Equivalent +3.3V Z = 50 Z = 50 50 50 Rb +3.3V source 46 to 49 destination C1 0.01F (optional) Figure 4. Three-Resistor "Y-Termination" RELATED PRODUCT AND SUPPORT DOCUMENTATION Part Number SY100EL16VO SY89250V Function 3.3V/5V 800MHz Precision PECL Amplifier with Low-Gain Feedback 3.3V/5V Enhanced Differential Receiver Data Sheet Link www.micrel.com/product-info/products/sy100el16vo.shtml www.micrel.com/product-info/products/sy89250v.shtml M9999-051805 hbwhelp@micrel.com or (408) 955-1690 5 Micrel, Inc. Precision Edge(R) SY89207L 10 LEAD MSOP (K10-1) Rev. 00 MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 TEL USA + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com The information furnished by Micrel in this data sheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use. Micrel reserves the right to change circuitry and specifications at any time without notification to the customer. Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser's use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser's own risk and Purchaser agrees to fully indemnify Micrel for any damages resulting from such use or sale. (c) 2005 Micrel, Incorporated. M9999-051805 hbwhelp@micrel.com or (408) 955-1690 6 |
Price & Availability of SY89207LMI |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |