![]() |
|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
3.0x2.0mm SURFACE MOUNT LED LAMP PRELIMINARY SPEC ATTENTION OBSERVE PRECAUTIONS FOR HANDLING ELECTROSTATIC DISCHARGE SENSITIVE DEVICES Part Number: AA3020RWS/Z WHITE Description The source color devices are made with InGaN Light Emitting Diode. Static electricity and surge damage the LEDS. It is recommended to use a wrist band or anti-electrostatic Features 3.0MM X 2.0MM, 1.4MM HIGH, ONLY MINIMUM SPACE REQUIRED. SUITABLE FOR COMPACT OPTOELECTRONIC APPLICATIONS. LOW POWER CONSUMPTION. PACKAGE : 2000PCS / REEL. MOISTURE SENSITIVITY LEVEL : LEVEL 4. ELECTROSTATIC DISCHARGE THRESHOLD (HBM):1000V. TYP. COLOR TEMPERATURE: 6500K COLOR COORDINATES:X=0.31,Y=0.31 ACC. TO CIE1931(WHITE). OPTICAL EFFICIENCY: 51.6 lm/W(TYP.) COLOR REPRODUCTION INDEX: 80 RoHS COMPLIANT. glove when handling the LEDs. All devices, equipment and machinery must be electrically grounded. Applications traffic signaling. backlighting (illuminated advertising , general lighting). interior and exterior automotive lighting. substitution of micro incandescent lamps. reading lamps. signal and symbol luminaire for orientation. marker lights (e.g. steps, exit ways, etc). decorative and entertainment lighting. indoor and outdoor commercial and residential architectural lighting. Package Dimensions Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. 3. Specifications are subject to change without notice. 4 . The device has a single mounting surface. The device must be mounted according to the specifications. SPEC NO: DSAH4501 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/26/2007 DRAWN: S.J.LIU PAGE: 1 OF 8 ERP: 1201002983 Handling Precautions Compare to epoxy encapsulant that is hard and brittle, silicone is softer and flexible. Although its characteristic significantly reduces thermal stress, it is more susceptible to damage by external mechanical force. As a result, special handling precautions need to be observed during assembly using silicone encapsulated LED products. Failure to comply might leads to damage and premature failure of the LED. 1. Handle the component along the side surfaces by using forceps or appropriate tools. 2. Do not directly touch or handle the silicone lens surface. It may damage the internal circuitry. 3. Do not stack together assembled PCBs containing exposed LEDs. Outside impact may scratch the silicone lens or damage the internal circuitry. 4. During surface-mounting, the pickup capillary diameter should be larger than the silicone lens to insure the capillary does not scratch or damage the lens. SPEC NO: DSAH4501 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/26/2007 DRAWN: S.J.LIU PAGE: 2 OF 8 ERP: 1201002983 Selection Guide Part No. Dice Lens Type luminous Intensity Iv(mcd) @ 20mA Min. AA3020RWS/Z WHITE (InGaN) WATER CLEAR 650 Typ. 1200 Note2 v (mlm) @ 20mA Min. 1500 Note3 Viewing Note1 Angle 21/2 120 Typ. 3300 Absolute Maximum Ratings at TA=25C Parameter Power dissipation Reverse Voltage Junction temperature Operating Temperature Storage Temperature DC Forward Current Peak Forward Current Thermal resistance Note5 Junction/ambient Junction/solder point Note4 Symbol Pt VR TJ Top Tstg IF IFM Rth JA Rth JS Value 111 5 110 -40 To +85 -40 To +100 30 100 300 140 Unit mW V C C C mA mA C/W C/W Notes: 1.1/2 is the angle from optical centerline where the luminous intensity is 1/2 the optical centerline value. 2.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 3.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. 4.1/10 Duty Cycle, 0.1ms Pulse Width. 5.Rth(J-A) Results from mounting on PC board FR4 (pad size16 mm 2 per pad), Electrical / Optical Characteristics at TA=25C Parameter Chromaticity coordinate x acc.to CIE1931 IF=20mA [Typ.] Chromaticity coordinate y acc.to CIE1931 IF=20mA [Typ.] Forward Voltage IF=20mA [Min.] Forward Voltage IF=20mA [Typ.] Forward Voltage IF=20mA [Max.] [Typ.] IR Reverse Current (VR=5V) [Max.] TC x 10 -0.1 10-3 /C 10-3 /C Temperature coefficient of x IF=20mA, -10C T100C [Typ.] Temperature coefficient of y IF=20mA, -10C T100C [Typ.] Temperature coefficient of VF IF=20mA, -10C T100C [Typ.] VF Note2 Symbol X Y Note1 Value 0.31 0.31 2.7 3.2 3.7 0.01 Unit - Note1 V Reverse Current (VR=5V) A TCy -0.2 TCV -2.5 mV/C Notes: 1.Chromaticity coordinates are measured by a current pulse of 20ms with a tolerance of 0.01 in X and Y color coordinates. 2.Forward voltage is measured with a current pulse of 10ms at a tolerance of 0.1V. SPEC NO: DSAH4501 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/26/2007 DRAWN: S.J.LIU PAGE: 3 OF 8 ERP: 1201002983 Brightness codes luminous Intensity Iv(mcd) @ 20mA Code. T U V Min. 650 900 1200 Note1 v (mlm) @ 20mA Max. 1200 1500 1800 Typ. 3260 3350 3400 Note2 Notes: 1.Luminous intensity is measured by a current pulse of 10ms at a tolerance of 15%. 2.The typical data of Luminous Flux can only reflect statistical figures, actual parameters of individual product could differ from the typical data. For the purpose of product enhancement, the typical data is subject to change without prior notice. White AA3020RWS/Z SPEC NO: DSAH4501 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/26/2007 DRAWN: S.J.LIU PAGE: 4 OF 8 ERP: 1201002983 AA3020RWS/Z SPEC NO: DSAH4501 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/26/2007 DRAWN: S.J.LIU PAGE: 5 OF 8 ERP: 1201002983 AA3020RWS/Z White CIE 0.44 0.42 0.40 c1 0.38 0.36 0.34 0.32 0.30 0.28 a0 a1 b3 b4 b1 b2 c0 0.26 0.24 0.22 0.22 0.24 0.26 0.28 0.30 0.32 0.34 0.36 0.38 0.40 0.42 0.44 a0 X Y 0.264 0.267 0.283 0.305 0.296 0.276 0.280 0.248 X Y 0.248 0.286 a1 0.275 0.321 0.283 0.305 0.264 0.267 Reference CCT: 14000~9000k b1 X Y 0.283 0.305 0.330 0.360 0.330 0.339 0.287 0.295 X Y Reference CCT: 14000~9000k b2 0.287 0.295 0.330 0.339 0.330 0.318 0.296 0.276 Reference CCT: 9000~5600k b3 X Y 0.275 0.321 0.298 0.350 0.306 0.332 0.283 0.305 X Y Reference CCT: 9000~5600k b4 0.298 0.350 0.321 0.379 0.330 0.360 0.306 0.332 Reference CCT: 9000~7000k c0 X Y 0.330 0.360 0.361 0.385 0.356 0.351 0.330 0.318 X Y Reference CCT: 7600~5600k c1 0.321 0.379 0.366 0.419 0.361 0.385 0.330 0.360 Reference CCT: 5600~4600k Reference CCT: 6000~4600k SPEC NO: DSAH4501 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/26/2007 DRAWN: S.J.LIU PAGE: 6 OF 8 ERP: 1201002983 AA3020RWS/Z Recommended Soldering Pattern (Units : mm; Tolerance: 0.1) Tape Specifications (Units : mm) Reel Dimension SPEC NO: DSAH4501 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/26/2007 DRAWN: S.J.LIU PAGE: 7 OF 8 ERP: 1201002983 PACKING & LABEL SPECIFICATIONS AA3020RWS/Z SPEC NO: DSAH4501 APPROVED: WYNEC REV NO: V.2 CHECKED: Allen Liu DATE: MAY/26/2007 DRAWN: S.J.LIU PAGE: 8 OF 8 ERP: 1201002983 |
Price & Availability of AA3020RWSZ
![]() |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |