 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| TESTING GU (General Use) Type SOP Series 1- Channel (Form B) 4-Pin Type (6-pin) 4.30.2 .169.008 4.40.2 .173.008 2.10.2 .083.008 PhotoMOS RELAYS 3. Tape and reel The device comes standard in a tape and reel (1,000 pcs./reel) to facilitate automatic insertion machines. 4. Controls low-level analog signals PhotoMOS relays feature extremely low closed-circuit offset voltage to enable control of low-level analog signals without distortion. 5. Low-level off state leakage current In contrast to the SSR with an off state leakage current of several milliamps, the PhotoMOS relay features a very small off state leakage current of 1nA even with the rated load voltage of 350 V (AQY410S). (4-pin) Approx. 70% Volume mm inch Footprint 1 4 Approx. 70% 2 3 2. Low on resistance for normallyclosed type This has been realized thanks to the builtin MOSFET processed by our proprietary method, DSD (Double-diffused and Selective Doping) method. Cross section of the normally-closed type of power MOS , Passivation membrane Intermediate Source electrode Gate electrode insulating membrane Gate oxidation membrane N+ P+ N+ N+ P+ N+ N- FEATURES , , Drain electrode N+ 1. SO package 4-Pin type in super miniature design The device comes in a super-miniature SO package 4-Pin type measuring (W) 4.3x(L) 4.4x(H) 2.1 mm (W) .169x(L) .173x(H) .083 inch --approx. 70% of the volume and 70% of the footprint size of SO package 6-pin type PhotoMOS Relays. TYPICAL APPLICATIONS * Telecommunications (PC, Electoronic Notepad) * Measuring and Testing equipment * Factory Automation Equipment * Security equipment * High speed inspection machines TYPES AC/DC type Output rating* Part No. Packing quantity in tape and reel Load voltage Load current Picked from the 1/2-pin side Picked from the 3/4-pin side 350 V 120 mA AQY410SX AQY410SZ 1,000 pcs. 400 V 100 mA AQY414SX AQY414SZ * Indicate the peak AC and DC values. Notes: (1) Tape package is the standard packing style. Also available in tube. (Part No. suffix "X" or "Z" is not needed when ordering; Tube: 100 pcs.; Case: 2,000 pcs.) (2) For space reasons, the top two letters of the product number "AQY" and "S" are omitted on the product seal. The package type indicator "X" and "Z" are omitted from the seal. (Ex. the label for product number AQY414S is 414). RATING AC/DC type 1. Absolute maximum ratings (Ambient temperature: 25C 77F) Item LED forward current LED reverse voltage Input Peak forward current Power dissipation Load voltage (peak AC) Continuous load current (peak AC) Output Peak load current Power dissipation Total power dissipation I/O isolation voltage Temperture Operating limits Storage Symbol IF VR IFP Pin VL IL Ipeak Pout PT Viso Topr Tstg AQY410S 50 mA 3V 1A 75 mW 350 V 0.12 A 0.3 A 400 V 0.1 A 100ms (1 shot), VL = DC AQY414S Remarks f = 100 Hz, Duty factor = 0.1% 0.24 A 300 mW 350 mW 1,500 V AC -40C to +85C -40F to +185F -40C to +100C -40F to +212F Non-condensing at low temperatures 63 AQY41rS 2. Electrical characteristics (Ambient temperature: 25C 77F ) Item LED operate (OFF) current Input LED reverse (ON) current LED dropout voltage On resistance Output Off state leakage current Operate (OFF) time* Maximum Maximum ILeak Ton Toff Ciso Riso 0.52 ms 1 ms 0.23 ms 1 ms 0.8 pF 1.5 pF 1,000 M 0.28 ms Typical Maximum Minimum Typical Typical Maximum Typical Ron Symbol IFon IFoff VF AQY410S AQY414S 0.9 mA 3 mA 0.4 mA 0.85 mA 1.14 V (1.25 V at IF = 50 mA) 1.5 V 26 35 1 A 0.47 ms Remarks IL = Max. IL = Max. IF = 5 mA IF = 0 mA IL = Max. Within 1 s on time IF = 5 mA VL = Max. IF = 0 mA-->5 mA IL = Max. IF = 5 mA-->0 mA IL = Max. f = 1 MHz VB = 0 500 V DC For type of connection, see page 32. 18 25 Typical Maximum Typical Reverse (ON) time* Transfer Maximum characteristics Typical I/O capacitance Maximum Initial I/O isolaMinimum tion resistance Note: Recommendable LED forward current IF = 5mA. *Operate/Reverse time Input Output 10% 90% Toff Ton s For Dimensions, see Page 28. s For Schematic and Wiring Diagrams, see Page 32. s For Cautions for Use, see Page 36. REFERENCE DATA 1. Load current vs. ambient temperature characteristics Allowable ambient temperature: -40C to +85C -40F to +185F 140 120 Load current, mA 100 80 60 40 20 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, C AQY410S 25 On resistance, AQY414S 20 AQY410S 15 10 5 0 0 AQY414S 2. On resistance vs. ambient temperature characteristics Measured portion: between terminals 3 and 4; LED current: 0 mA; Continuous load current: Max.(DC) 30 3. Operate (OFF) time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max.(DC); Continuous load current: Max.(DC) 2 Operate (OFF) time, ms 1.5 1 AQY414S 0.5 AQY410S -40 -20 0 20 40 60 80 85 100 Ambient temperature, C -40 -20 0 20 40 60 80 85 100 Ambient temperature, C 64 AQY41rS 4. Reverse (ON) time vs. ambient temperature characteristics LED current: 5 mA; Load voltage: Max.(DC); Continuous load current: Max.(DC) 1.0 Reverse (ON) time, ms 5. LED operate (OFF) current vs. ambient temperature characteristics Load voltage: Max.(DC); Continuous load current: Max.(DC) LED operate (OFF) current, mA 5 6. LED reverse (ON) current vs. ambient temperature characteristics Load voltage: Max.(DC); Continuous load current: Max.(DC) LED operate (OFF) current, mA 5 0.8 4 4 0.6 3 3 0.4 AQY414S 0.2 AQY410S 0 -40 -20 0 20 40 60 80 85 100 Ambient temperature, C 2 2 1 1 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C 0 -40 -20 0 20 40 60 80 85 Ambient temperature, C 7. LED dropout voltage vs. ambient temperature characteristics LED current: 5 to 50 mA 1.5 LED dropout voltage, V 1.4 1.3 1.2 1.1 1.0 0 50mA 30mA 20mA 10mA 5mA 8. Voltage vs. current characteristics of output at MOS portion Measured portion: between terminals 3 and 4; Ambient temperature: 25C 77F 140 120 100 80 60 40 20 -3 -2.5 -2 -1.5 -1 -0.5 Current, mA AQY410S 9. Off state leakage current Measured portion: between terminals 3 and 4; LED current: 5 mA; Ambient temperature: 25C 77F 10-3 Off state leakage current, A AQY414S 0.5 1 1.5 2 2.5 3 -20 Voltage, V -40 -60 -80 -100 -120 -140 10-6 10-9 10-12 0 20 40 60 80 Load voltage, V 100 -40 -20 0 20 40 60 80 85 Ambient temperature, C 10. LED forward current vs. operate (OFF) time characteristics Measured portion: between terminals 3 and 4; Load voltage: Max.(DC); Continuous load current: Max.(DC); Ambient temperature: 25C 77F 3.0 Operate (OFF) time, ms 11. LED forward current vs. reverse (ON) time characteristics Measured portion: between terminals 3 and 4; Load voltage: Max.(DC); Continuous load currentMax.(DC); Ambient temperature: 25C 77F 0.6 Reverse (ON) time, ms 0.5 0.4 0.3 0.2 0.1 0 12. Applied voltage vs. output capacitance characteristics Measured portion: between terminals 3 and 4; Frequency: 1 MHz; Ambient temperature: 25C 77F 120 Output capacitance, pF 100 80 60 40 20 0 2.5 2.0 1.5 1.0 0.5 0 0 10 20 30 40 50 LED forward current, mA 60 0 10 20 30 40 50 LED forward current, mA 60 0 10 20 30 40 50 Applied voltage, V 60 5/7/2001 All Rights Reserved, (c) Copyright Matsushita Electric Works, Ltd. 65 Go To Online Catalog |
Price & Availability of AQY414SZ
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |