 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W Package Dimension Features Highest Lumen Per Watt Long Operational Life White Housing Superior ESD Protection Instant Light (less than 100ns) Compatible to Luxeon's "Lambertian" True SMD Emitter IR Reflow Soldering Process Applications Accent Light/Down Light/Spot Light Automotive Exterior/Interior Light Large Area LCD Backlights Marine/Miner's Lighting Portable Flashlight/ General Lighting Note: Lens is low dome profile Tolerance: see spec Unit: mm Optical Characteristics at TJ=25C, IF=350mA PART NUMBER Emitting Color LED Chip Material Lens Color Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Water Clear Wavelength (nm) CCT (K) Range Min BTP-99NRCG-XX-X/W BTP-99AMCG-XX-X/W BTP-99YECG-XX-X/W BTP-99BLCG-XX-X/W BTP-99PGCG-XX-X/W BTP-99WWCG-XX-X/W BTP-99WHCG-XX-X/W Notes: 1) 2) 3) 4) Picture for illustration purpose only. Please refer to outline dimension for actual package size. Drive Voltage @ 350mA Typ. 2.40V 2.40V 2.40V 3.50V 3.50V 3.50V 3.50V Luminous Flux (lm) @350mA Typ. 30 lm 36 lm 30 lm 10 lm 30 lm 20 lm 25 lm VIEW ANGLE 21/2 (deg) 140 140 140 140 140 140 140 Max 635 620 595 475 540 3800K 8000K Normal Red Amber Yellow Blue Green Warm White White AlInGaP AlInGaP AlInGaP AlInGaN AlInGaN AlInGaN AlInGaN 620 610 585 460 520 2800K 5000K Flux is measured with the accuracy of 15%. Please refer to Flux Selection Guide CCT is measured with the accuracy of 400K. Please refer to CCT Selection Guide VF is measured with the accuracy of 0.15V. Please refer to VF Selection Guide Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 1 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W Absolute Maximum Ratings at TJ=25C Parameter Red/Amber/Yellow White/Blue/Green Power Dissipation (W) DC Forward Current (mA) [1] [4] 1.00 350 500 350 5 50 16,000 [3] 1.22 350 500 350 5 50 16,000 135 15 -2 -40 to +105 -40 to +105 Peak Pulsed Forward Current (mA) Average Forward Current (mA) Reverse Voltage (V) Reverse Current (uA) ESD Sensitivity (V) [2] LED Junction Temperature at 350mA (C) Temperature Coefficient of VF (mV/C) Storage Temperature (C) Operating Temperature (C) Lead Soldering Temperature (C)[4] 120 15 -2 -40 to +105 -40 to +105 Thermal Resistance Junction to Board (C/W) 260C for 5 seconds max 260C for 5 seconds max Application Notes: 1. 2. 3. 4. 5. Proper forward current must be observed to maintain the junction temperature below maximum rating Although all products listed are class two ESD protection (+/- 16KV by HBM mode), care must be fully taken when handling products Specification is subjected to change for improvements without notice. Test conditions: tp10us, duty cycle = 0.005 CAUTION: When lighting up, the emitter will become very hot if it is not attached to a heat sink. Please provide proper heat management to prevent damage to the emitter. Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 2 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W CCT, Flux and VF Selection Guide (@ TJ = 25C, IF=350mA) BTP-99XXCG-XX-X/W White Housing Wavelength Ranks Selection Flux Ranks Selection Color Bin B5 B6 B7 XX G6 G7 G8 G9 XX XX XX XX D(nm) Min Max 460 465 465 470 470 475 460 - 475 515 520 520 525 525 530 530 535 515 - 535 620 - 630 610 - 620 585 - 595 Color Bin H J K X M Flux (lumens) 4.5~6 6~8 8~10 Default Full Range 14~18 18~23 23~30 30~39 39~50 Default Full Range Blue Blue Green Red Amber Yellow Red Amber Yellow Green White N P Q R X CCT Ranks Selection VF Ranks Selection Color Red Amber Yellow Color Temp Warm White Bin 00 01 XX 02 03 04 XX CCT(K) Min Max 2800 3300 5000 6000 7000 3300 3800 6000 7000 8000 Bin V04 V05 V06 V07 VXX(Full) V08 V09 V10 V11 V12 VXX(Full) VF (V) Min Max 2.0 2.2 2.2 2.4 2.4 2.6 2.6 2.8 2.0~2.8 2.8 3.0 3.0 3.2 3.2 3.4 3.4 3.6 3.6 3.8 2.8~3.8 2800K - 3800K White 5000K - 8000K White Blue Green (Please specify on order, otherwise, default full range of VF) Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 3 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W Typical Radiation Pattern 100 90 80 70 60 50 40 30 20 10 0 -100 R e la t iv e I n t e n s it y (% ) -80 -60 -40 -20 0 20 40 60 80 100 Angular Displacement(Degree) Fig. 1 Typical Radiation Pattern Operating Current & Ambient Temperature 2a. 2b. Fig. 2 Forward Current vs Ambient Temperature Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 4 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 5 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W Light Output & Junction Temperature Fig. 5a Relative Light Output vs Junction Temperature Fig. 5b Relative Light Output vs Junction Temperature Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 6 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W Wavelength Characteristics, TJ = 25C Fig. 6a Relative Intensity vs Wavelength White Color Spectrum, TJ = 25C Fig. 6b White Color Spectrum (Typ 5500K) Fig. 6c Warm White Color Spectrum (Typ 3300K) Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 7 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W Recommended Solder Pad Layout Tape and Reel Packaging Dimension Note: The emitter should be picked up by the body (not lens) during placement. The inner diameter of the pick-up collect should be greater or equal to 6.5mm Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 8 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W Recommended IR Reflow Conditions Reflow Soldering Lead Solder Pre-heat Pre-heat time Peak Temperature Soldering Time Conditions 120~150C 120 sec Max 240C Max 10 sec Max Refer to Temperature profile A Lead-Free Solder 180~200C 120 sec Max 260C Max 10 sec Max Refer to Temperature profile B (N2 reflow is recommended) Temperature Profile A (Surface of MCPCB) Temperature Profile B (Surface of MCPCB) Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 9 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com ProLite 1W SMD Emitter BTP-99XXCG-XX-X/W IR Reflow Process Notes Occasionally there is a brightness decrease due to the influence of heat or ambient during air reflow. It is recommended that customer use nitrogen reflow method. Repairing should not be done after the LEDs have been soldered. When repairing is required, double-head soldering iron should be used. Customer should confirm whether the characteristics of the LEDs will or will not damaged before carrying out the repair. Reflow soldering should not be done more than two times When soldering, do not put stress on the LEDs during heating. After soldering, do not warp the circuit board. Manual Hand Soldering Notes For prototype builds or small production runs, it is possible to place and solder the emitters. It is recommended to hand solder the leads and slug with a solder tip temperature of 230C for less than 10seconds. This profile ensures a junction temperature below the maximum of 120C, avoiding damage to the emitter or to the MCPCB dielectric layer. Damage dielectric layer can cause a short circuit in the array. Other Important Notes: The information contained herein is presented only as a Guide for the application of our products. Brilliance Technologies assumes no responsibility for any infringement of intellectual property or other rights of the third parties which may result from its use. Brilliance Technologies continually improves the quality of our products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsible of the customer, when using Brilliance Technologies products, to comply with the standard of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such Brilliance Technologies products cause loss of human life, bodily injury or damage to property. Brilliance Technologies products listed in this data sheet are intended for usage in general electronics and/or non-commercial or industrial lighting products. These products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury. In developing your design, please ensure that Brilliance Technologies products are used within specified operating ranges as set forth in the most recent Brilliance Technologies data sheets. BT-Rev. 1.0A20050119 Specifications are subject to change for improvement without notice. Copyright (c) 2003 Brilliance Technologies Co., Ltd. All rights reserved. Part No.: BTP-99XXCG-XX-X/W Rev1.2005 Page 10 of 10 DB LECTRO Inc. 3600 boul. Matte suite i Brossard Qc J4Y-2Z2 tel:(450)-444-1424 fax:(450)-444-4714 www.dblectro.com |
Price & Availability of BTP-99YECG-XX-XW
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |