|
If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
Datasheet File OCR Text: |
3.96mm Pitch Connector Directly Mounted on Board DF6 Series sFeatures 1. Service Efficiency Up Conventional thick cables are directly mounted on the board piece by piece, but connecterization has achieved soldering services in a batch. This product enhances soldering service efficiency. 2. Miniaturization This product achieves miniaturization for thick cables. Mounting height on board Width : : 7.5mm 5.0mm 3. Board Prefixed Mechanism Since the connector is softly press-fitted to the board for insertion, it can be prefixed to the board. Height: 7.5mm sApplications Secondary power supply units for various equipment width: 4.6mm Prefixed mechanism B91 sProduct Specifications Current rating Rating (Note 1) Voltage rating AWG 18 : Cable size AWG 20 : AWG 22 : 300V AC 5A 4A 3A Operating Temperature Range Operating Moisture Range Storage Temperature Range Storage Humidity Range -35 to +85c (Note 1) 20 to 80% -10 to +60c (Note 2) 40 to 70% (Note 2) Item 1.Insulation Resistance 2.Withstanding voltage 3.Contact Resistance 4.Vibration 6.Temperature Cycle 1000M ohms min. Specification 500V DC 1500V AC/1 minute 100mA No flashover or insulation breakdown. 15m ohms max. No damage, cracks, or parts looseness. No damage, cracks, or parts looseness. Condition Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions. 96 hours at temperature of 40c and humidity of 90% to 95% (-55c: 30 minutes 15 to 35c: 10 minutes85c: 30 minutes 5 to 35c: 10 minutes ) 5 cycles Flow: 250c for 10 seconds Manual soldering: 300c for 3 seconds 5.Humidity (Steady state) No damage, cracks, or parts looseness. 7. Resistance to Soldering heat No deformation of components affecting performance. Note 1: Includes temperature rise caused by current flow. Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation. sMaterial Product Crimping Plug Crimping Contact for Plug Part Insulator Brass Material Polyamide Copper Alley Finish White Tin plated Remarks UL94V-0 ________ Note: HRS's tin plating process takes measures against whisker. sOrdering Information qCrimping Plug DF6 - * P - 3.96 C q q Series Name e Connector type P: Plug : DF 6 w e r t r Contact pitch: 3.96mm t C: Crimping plug w Number of contacts: 1~8, 10 qCrimping Contact DF6A - 1822 PCF q q Applicable cable type None: UL 1007 A: UL 1015 w Applicable cable size 1822: AWG#18~#22 w e e Packaging type PCF: Plug contact, reel packaging SC: Plug contact, bag packaging B92 sPrecrimping Plug Photo: Contact Inserted Part Number DF6- 1P-3.96C DF6- 2P-3.96C DF6- 3P-3.96C DF6- 4P-3.96C DF6- 5P-3.96C DF6- 6P-3.96C DF6- 7P-3.96C DF6- 8P-3.96C DF6-10P-3.96C CL No. 546-0001-1 546-0002-4 546-0003-7 546-0004-0 546-0005-2 546-0006-5 546-0007-8 546-0008-0 546-0011-5 Number of Contacts 1 2 3 4 5 6 7 8 10 A 4.92 8.88 12.84 16.80 20.76 24.72 28.68 32.64 40.56 _____ 3.96 7.92 11.88 15.84 19.80 23.76 27.72 35.64 B Contact View for Insertion Note: A packaging quantity is delivered by the bag unit (100 pcs.). sCrimping Contact qSlip length DF6-1822PC (F): 2.1mm to 2.6mm DF6A-1822PC (F): 2.3mm to 2.8mm qApplicable through-hole: 1.8 +0.15 0 Part Number DF6 -1822PCF DF6 -1822PC DF6A-1822PCF DF6A-1822PC CL No. 546-0009-3 546-0010-2 546-0013-0 546-0014-3 UL style 1007 1015 Applicable Cable Packaging Type Jacket dia. AWG size Contact Construct Reel 1.5 to 2.2mm AWG 18 34 cores/0.18mm Bag AWG 20 21 cores/0.18mm Reel 2.2 to 2.9mm AWG 22 17 cores/0.16mm Bag Quantity 5,000 100 3,000 100 A B C 1.2 1.4 10.2 1.5 10.5 1.7 Note 1. The applicable cable conductor is a tin plated and annealed copper wire. Note 2. If other cables are used instead of the applicable cable, contact the Hirose Sales Department. BApplicable Crimping Tools TypeItem Applicator Press unit Manual crimping tool Extraction tool Part Number AP105-DF6-1822P AP105-DF6A-1822P CM-105 DF6 -TA1822HC DF6A-TA1822HC DF-C-PO(A) CL No. 901-4505-9 901-4520-2 901-0005-4 550-0174-9 550-0222-0 550-0170-8 Applicable Contact DF6 -1822PCF DF6A-1822PCF ________ DF6 -1822PC DF6A-1822PC DF6/DF6A-1822PC(F) Note: If any trouble has been caused due to other tools, which are not designated by Hirose, Hirose never guarantee any products. B93 BPrecautions 1.Recommended soldering condition Flow: 250c for 3 seconds Manual soldering: 290c for 2 seconds sAfter soldering, if a load is given to the cable where connector and cable contain heat, the jacket holding member will be loosened. After soldering, the operation should be performed, after connector returns to room temperature. Refer to the "Nylon Connector Use Hand book". Don't use solvent to degrade the cable jacket like trichloroethane. In addition, avoid heat cleaning with solvent. Refer to the "Nylon Connector Use Hand book". 2.Cleaning condition 3.Connecting condition B94 |
Price & Availability of DF6A-1822PCF |
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |