 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| DPS50 Series 60 Watts Total Power: 30 - 60 Watts Input Voltage: 127 - 300 VDC, 90 - 264 VAC # of Outputs: Single Electrical Specs Input Input range Frequency Inrush current Input current Efficiency EMI/RFI Safety ground leakage current 90 - 264 VAC (wide range), 127 - 300 VDC 47 - 440 Hz <50A @ 230 VAC, cold start @ 25C <2.0A rms @ 115 VAC; <1A @ 230 VAC >80% @ full load typical, @115VAC FCC Part 15, Subpart B Class B & EN55022 (CISPR 22) Class B <0.5mA @ 50/60 Hz, 264 VAC input Output Special Features * CE Mark EMC & LVD * Universal AC input * Fully regulated output * Overload and short circuit protection * Internal remote sense * Constant voltage * High efficiency * High MTBF * IEC320 AC receptacle, 3 pin (type C14) * Built in EMI filter (CISPR 22 Class B) * LED power good indicator * Input power <74 watts * Complies with EN61000-3-2 Maximum Power (Po) 60W (DPS52, 30W) Hold-up time 10 ms. typical at full load @ 115VAC Overvoltage protection 20% - 45% above nominal output maximum. Latching type, recycle AC to reset. Overload protection Output short circuit protection auto recover. Overload protected @ 120 - 150% above maximum rating. Cable/connector DC cable with 2.5 mm center plug barrel type DC plug center +v DC plug outer -v Safety UL CSA NEMKO VDE CE CB CCC UL 60950-1 CSA-C22.2 No. 60950-1 IEC/EN60950-1 EN60950-1 EMC & LVD Certificate and report GB4943 Environmental Operating temperature: 0C to +40C ambient. Derate each output as 2.5% per degree from 40 to 60C. -20C start up. Storage temperature: -40C to +85C Electromagnetic susceptability designed to meet EN61000-4; -2, -3, -4, -5, -6, -8, -11, level 3 Humidity: Operating; non-condensing; 10% to 95% RH Vibration: Three orthogonal axes, 3 sweeps per axe at 1 oct/min. 2G peak 8 Hz to 500 Hz, operational MTBF demonstrated: >550,000 hours at full load and 25C ambient conditions 190 Technical Support: (888) 41ASTEC or (407) 241-2752 Americas: (760) 930-4600 Europe (UK) 44 (1384) 842-211 Asia (HK) 852-2437-9662 rev 06.14.05 AMERICAS 5810 Van Allen Way Carlsbad, CA 92008 Telephone: 760-930-4600 Facsimile: 760-930-0698 EUROPE Astec House, Waterfront Business Park Merry Hill, Dudley West Midlands, DY5 1LX, UK Telephone: 44 (1384) 842-211 Facsimile: 44 (1384) 843-355 ASIA Units 2111-2116, Level 21 Tower1, Metroplaza 223, Hing Fong Road Kwai Fong, New Territories Hong Kong Telephone: 852-2437-9662 Facsimile: 852-2402-4426 DPS50 Series Ordering Information Model Number DPS52 DPS53 DPS54 DPS55 DPS58 Maximum Output Power Voltage 30W 60W 60W 60W 60W 5V 12V 15V 24V 48V Maximum Peak Load Load1 6A 5A 4A 2.5A 1.25A 6.5A 5.4A 4.3A 2.7A 1.35A Regulation2 Ripple P/P (PARD)3 2% 2% 2% 2% 2% 50mV 120mV 150mV 240mV 480mV 1. Peak-to-peak with 20 MHz bandwidth and 10 F tantalum capacitor in parallel with a 0.1 F capacitor. 2.39" (60.7) 5.24" (133.0) INDICATOR LED DC OUTPUT CABLE AC INLET 1.62" (41.0) 78.7" (200015) MODEL LABEL NOTES: 1. Specifications subject to change without notice. 2. All dimensions in inches (mm), tolerance is 0.02" (0.5mm) 3. Warranty: 1 year 4. Weight: 1.06 lb./ .48 kg 5. AC input power cord sold separately. 6. Specifications are for convection rating at factory settings at 115VAC input, 25C unless otherwise stated www.astecpower.com 191 |
Price & Availability of DPS58
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |